Difference between revisions of "Team:Aachen/Practices/Maker Faire"

(Carrying on an Aachen tradition)
(Carrying on an Aachen tradition)
Line 3: Line 3:
  
 
= Carrying on an Aachen tradition =
 
= Carrying on an Aachen tradition =
{{Team:Aachen/ReadMore|title=Go to Hardware|link=Team:Aachen/Lab/Bioreactor/Hardware|picture=rmPumps|url=/2015/images/0/08/Aachen_tile_Lab_Bioreactor_Hardware_Pumps.JPG}}
+
{{Team:Aachen/ReadMore|title=Go to Hardware|link=/Team:Aachen/Lab/Bioreactor/Hardware|picture=rmPumps|url=/2015/images/0/08/Aachen_tile_Lab_Bioreactor_Hardware_Pumps.JPG}}
 
Last year, the iGEM Team Aachen was invited to the annual MakerFaire in Hannover to exhibit their DIY measurement devices. This year, we went to the MakerFaire to demonstrate the first prototype of our self made '''small scale biorector''' to more than 5500 visitors per day. Thanks a lot to Carsten from the iGEM Team Braunschweig 2014 and to the Stratum Hackerspace for sharing their exhibition booth with us!
 
Last year, the iGEM Team Aachen was invited to the annual MakerFaire in Hannover to exhibit their DIY measurement devices. This year, we went to the MakerFaire to demonstrate the first prototype of our self made '''small scale biorector''' to more than 5500 visitors per day. Thanks a lot to Carsten from the iGEM Team Braunschweig 2014 and to the Stratum Hackerspace for sharing their exhibition booth with us!
  
Line 10: Line 10:
  
 
== Initiating our collaboration with the iGEM Team Bielefeld ==
 
== Initiating our collaboration with the iGEM Team Bielefeld ==
{{Team:Aachen/ReadMore|title=Read More|link=Team:Aachen/Collaborations#Bielefeld-CeBiTec|picture=rmBielefeld|url=/2015/images/f/f7/Aachen_HumanPractice_MakerFaire_Bielefeld.jpg}}
+
{{Team:Aachen/ReadMore|title=Read More|link=/Team:Aachen/Collaborations#Bielefeld-CeBiTec|picture=rmBielefeld|url=/2015/images/f/f7/Aachen_HumanPractice_MakerFaire_Bielefeld.jpg}}
 
Before going to the MakerFaire, we stopped by at the iGEM Team Bielefeld. While having coffee and cake, each team presented their project followed by a little discussion and receiving feedback.
 
Before going to the MakerFaire, we stopped by at the iGEM Team Bielefeld. While having coffee and cake, each team presented their project followed by a little discussion and receiving feedback.
 
We were fortunate to get valuable ideas concerning using our pumps in microfluidics. As a consequence, we adjusted the design of our devices and customized the control program software to support this field of application.
 
We were fortunate to get valuable ideas concerning using our pumps in microfluidics. As a consequence, we adjusted the design of our devices and customized the control program software to support this field of application.
Line 18: Line 18:
  
 
== First encounter with the Technik Garage ==
 
== First encounter with the Technik Garage ==
{{Team:Aachen/ReadMore|title=Read More|link=Team:Aachen/Practices/Community Labs|picture=rmTechnikgarage|url=/2015/images/6/6c/Aachen_HumanPractice_Overview_TechnikGarage.jpg}}
+
{{Team:Aachen/ReadMore|title=Read More|link=/Team:Aachen/Practices/Community Labs|picture=rmTechnikgarage|url=/2015/images/6/6c/Aachen_HumanPractice_Overview_TechnikGarage.jpg}}
 
Apart from demonstrating our bioreactor, we had a look at all the amazing projects made by the other makers. It happended that we came across one the very few German Community Labs, the “Technik Garage”. Among other things, they built a pH-value system that automatically corrects the pH of a measured solution by pumping vinegar or diluted drain cleaner into the solution. Such as we do, they use rotation pumps. However, they used to buy pumps from the internet. That is why, they were really interested in our low-cost DIY pump design.  
 
Apart from demonstrating our bioreactor, we had a look at all the amazing projects made by the other makers. It happended that we came across one the very few German Community Labs, the “Technik Garage”. Among other things, they built a pH-value system that automatically corrects the pH of a measured solution by pumping vinegar or diluted drain cleaner into the solution. Such as we do, they use rotation pumps. However, they used to buy pumps from the internet. That is why, they were really interested in our low-cost DIY pump design.  
  

Revision as of 14:03, 18 September 2015


Carrying on an Aachen tradition

Last year, the iGEM Team Aachen was invited to the annual MakerFaire in Hannover to exhibit their DIY measurement devices. This year, we went to the MakerFaire to demonstrate the first prototype of our self made small scale biorector to more than 5500 visitors per day. Thanks a lot to Carsten from the iGEM Team Braunschweig 2014 and to the Stratum Hackerspace for sharing their exhibition booth with us!


a

Initiating our collaboration with the iGEM Team Bielefeld

Before going to the MakerFaire, we stopped by at the iGEM Team Bielefeld. While having coffee and cake, each team presented their project followed by a little discussion and receiving feedback. We were fortunate to get valuable ideas concerning using our pumps in microfluidics. As a consequence, we adjusted the design of our devices and customized the control program software to support this field of application.


a

First encounter with the Technik Garage

Apart from demonstrating our bioreactor, we had a look at all the amazing projects made by the other makers. It happended that we came across one the very few German Community Labs, the “Technik Garage”. Among other things, they built a pH-value system that automatically corrects the pH of a measured solution by pumping vinegar or diluted drain cleaner into the solution. Such as we do, they use rotation pumps. However, they used to buy pumps from the internet. That is why, they were really interested in our low-cost DIY pump design.


During the discussions about open hardware and open biology, we came to know that one of their projects is perfectly matching our strategy. To be more precise, the Technik Garage developed a DIY system to extract CO2 from thin air. Together with the next generation electrolysis cells of [http://igem.rwth-aachen.de/2015/index.php/Team:Aachen/Collaborations#Cooperation_with_industry Sunfire] which can convert CO2 to methanol, this would be the perfect method to exploit an alternative sustainable carbon source. Since we had so many overlapping interests, we agreed to meet again. All of this inspired us to have a deeper look into the German [http://igem.rwth-aachen.de/2015/index.php/Team:Aachen/Practices/Community_Labs Community Lab scene].

a

Teach the teacher

Aachen Maker07.jpg
Fascination has no age

The best part about the MakerFaire was when children at the age of twelve were fascinated by the bioreactor and tried their best to understand the working principles behind every part. But also adults were affected by our presented hardware. A number of teachers asked us if they could take pictures of us and our work for teaching purposes. One teacher from a private school was even interested in buying our bioreactor.


Together we worked out a possible teaching concept that unites different classes: Assembly of the bioreactor in a science class, analysis of the software in the computer science class and using the bioreactor in the biology (they have an S1 lab) and chemistry class. Unfortunately, we could not realize the project before the jamboree because of the summer holidays in German schools.

Conclusion

Aachen Maker14.jpg
Team picture Maker Faire 2015

Within three days we

  • Initiated the collaboration with the iGEM Team Bielefeld
  • Reached a wide variety of people with discussions about DIY Biology and Hardware
  • Got specific feedback on our bioreactor design from specialists of the DIY community


To crown it all, the organization commitee of the MakerFaire surprisingly awarded us “Maker of Choice” for an extraordinary exhibition. That meant, we got invited to exhibit our bioreactor at the MakerFaire Berlin in October. Unfortunately, we can not take that offer since we will still be in the USA at that time... Nonetheless, this was clearly a highlight of our trip!

Impressions of the MakerFaire

Aachen Maker02.jpg
Thank you, Stratum Braunschweig!
Aachen Maker05.jpg
Thousands of interested visitors, thousands of interesting discussions
Aachen Maker12.jpg
No this is not posed!
Aachen Maker16.jpg
Picture taken by the Technik Garage