Difference between revisions of "Team:Oxford/Interlab Study"

Overview

One of the fundamental principles of synthetic biology is the characterization of standard biological parts. iGEM HQ's International InterLab Measurement Study is an endeavour at achieving the large-scale characterization of a set of biological devices which has been previously designed and catalogued in the BioBricks Registry. In this study, iGEM teams from across the world set out to measure the fluorescence of model organisms which have been transformed with devices comprising the same green fluorescent protein (GFP) gene expressed at different levels by being fused to promoters of different strengths. This would provide a large dataset from which a more accurate analysis that accounts for lab-to-lab variations can be drawn.

The promoters characterized in the 2015 InterLab Study are three constitutive promoters of different strengths found within the Anderson Promoter Collection, which were included in the 2015 iGEM Distribution Kit. We assembled each of these three promoters upstream of a given GFP-encoding BioBrick and transformed each of the composite parts into three different strains of E. coli to measure their respective fluorescence levels. We measured fluorescence levels using a 96-well microplate reader, a flow cytometer, as well as a confocal microscope.

Key Results and Findings

Through the data obtained from our microplate reader, we found that the strengths of the three promoters investigated are in the same order as Anderson et al's initial characterization across the three E. coli strains which we studied. The relative fluorescence magnitudes we measured however do not agree with the ratios presented in the Anderson study.

To eliminate the dependence on equipment parameters associated with arbitrary fluorescence units, we calibrated our fluorescence readings against different concentrations of a fluorescent chemical standard, sodium fluorescein, and expressed fluorescence intensity in units of its concentration.

Bacterial Strains and Growth Conditions

E. coli DH5α was used for all cloning purposes. E. coli DH5α, E. coli MG1655, and E. coli RP437 ∆FliC were used as expression hosts. Cultures for cloning were grown in Lysogeny Broth (LB) at 37°C, whereas for GFP expression cultures were grown in Knight's M9 Supplemented Media at 37°C.

Plasmid Constructions and Gene Cloning

The selected Anderson promoters were fused to the designated GFP coding sequence using the BioBrick assembly method (step-by-step experimental detail as well as gel electrophoresis images can be found at the InterLab section of our lab notebook).

Briefly, the promoter-containing pSB1C3 plasmids BBa_K823005 (a.k.a. BBa_J23101), BBa_K823008 (a.k.a. BBa_J23106), BBa_K823013 (a.k.a. BBa_J23117), and RBS-GFP-containing pSB1A2 plasmid BBa_I13504 (RBS BBa_B0034 fused to GFP BBa_E0040) were obtained from the 2015 iGEM Distribution Kit and transformed into E. coli DH5α. Upon plasmid extraction (using Omega Biotek E.Z.N.A. Plasmid DNA Mini Kit I, Spin Protocol according to manufacturer specifications), restriction digest was performed on the SpeI and PstI sites of the promoter plasmids to linearize them, and the XbaI and PstI sites of the RBS-GFP plasmid to isolate the RBS-GFP sequence. Subsequent ligations were performed to insert the isolated RBS-GFP sequence into the linearized promoter plasmids, yielding the composite parts BBa_K823005+I13504, BBa_K823008+I13504, and BBa_K823013+I13504, each containing an 8bp assembly scar sequence TACTAGAG between the promoter sequence and the ribosome binding site. The identities of the plasmids were confirmed through sequencing (SourceBioScience, UK). The sequencing data is available for perusal in the Supplementary Information section below.

The three composite parts were then each separately transformed into the three different E. coli expression host strains.

Experimental Controls

BBa_I20270, a constitutively-promoted GFP expression device, and BBa_R0040, a pTetR promoter with no coding sequence linked downstream were cloned into the aforementioned expression host strains to serve as positive and negative controls for the experiments respectively.

Plate Reader: Calibration against Chemical Standard

Sodium fluorescein was the chemical standard of choice for the plate reader fluorescence readings as it fluoresces in the same green colour as GFP at concentrations below 0.05M (above 0.05M, sodium fluorescein has a red tint).

1.66g of fluorescein (free acid) was first dissolved in 5mL of pH 8.0 Tris HCl to obtain 1M fluorescein acid solution. The solution was then neutralized with 5mL 2M NaOH (fluorescein is a dibasic acid) to obtain 10mL of 0.5M sodium fluorescein solution (hereon referred to as NaFluo).

Serial dilution of NaFluo was performed for the construction of calibration curve. 100µL of NaFluo solution is measured at each time in the wells of a 96-well plate.

Plate Reader: Culture Growth Conditions

Stationary cultures for expression measurement were grown overnight for 18 hours at 37°C in 5mL chloramphenicol-supplemented Knight's M9 Supplemented Media contained in glass test tubes oriented to be standing at an angle with 225 rpm orbital shaking.

Plate Reader: Experimental Setup

A BMG LABTECH FLUOstar Omega was used for all plate reader measurements. For fluorescence readings, the excitation filter used was 485-12 nm and the emission filter used was 520 nm. Gain was set to 550 and number of flashes per well was set to 20. For OD₆₀₀ readings, the excitation filter used was 600 nm and number of flashes per well was set to 22.

The type of 96-well plate used was Corning® 96-well black well, clear bottom, tissue-culture treated sterile plates. 100µL of stationary culture was added into each well, and each culture was measured in triplicate. Each device was also measured in biological triplicate, whereby cultures were set up from three different colonies on the same streaked plate and measured accordingly. Reported fluorescence values are normalized against cell density through the OD₆₀₀ values read at the time of the fluorescence measurements.

Plate Reader: Calibration against Sodium Fluorescein

The fluorescence of NaFluo at concentrations of 20, 10, 5, 2, 1, 0.2, 0.1, 0.01 µM were measured and the linear relationship between fluorescence and NaFluo concentration was established using the "Add Trendline" linear regression function in Microsoft Excel. The trendline was fitted to pass through the origin and the gradient of the line was found to be 9669.1 arbitrary fluorescence units per µM of NaFluo.

The LINEST array function in Microsoft Excel was used to calculate the standard error in the gradient, which was found to be 177.9 arbitrary fluorescence units per µM of NaFluo, or 1.8% of the value of the gradient.

Plate Reader: Device Measurements

In this study, we set out to verify the relative measured strengths between three Anderson Promoters against their published values in the BioBricks registry as well as investigate any potential strain-to-strain variations in terms of across-the-board expression levels as well as relative promoter strengths which may arise. The relative strengths measured in our study is compared against the original Anderson study in the table below:

Study	E. coli strain	Reporter	K823005 (J23101)	K823008 (J23106)	K823013 (J23117)