Difference between revisions of "Team:Toulouse/Modeling"

Line 375: Line 375:
 
<br><br>
 
<br><br>
 
<center>
 
<center>
<img src="https://static.igem.org/mediawiki/2015/1/12/TLSE_pH_effect.png" style="width:80%;"/>    
+
<img src="https://static.igem.org/mediawiki/2015/1/12/TLSE_pH_effect.png" style="width:60%;"/>    
 
<p class="legend">Figure 9: Formic (A) and Butyric (B) acids [mmol/L] depending on pH for different growth rates.
 
<p class="legend">Figure 9: Formic (A) and Butyric (B) acids [mmol/L] depending on pH for different growth rates.
 
<br><i>Concentrations will be higher with low growth rates and pH decreasing.</i></p>
 
<br><i>Concentrations will be higher with low growth rates and pH decreasing.</i></p>

Revision as of 07:44, 13 September 2015

iGEM Toulouse 2015

Modeling


Content


Metabolic networks

The aim of our project is to create a biological system able to produce two molecules: butyric acid and formic acid.
To achieve this, we need to modify the existing balance between genes and environmental condition in E.Coli, which is used because it's one of more well known strains by scientifics. Indeed, we want to optimize butyrate and formate productions in our bacterium by adjusting environmental conditions in order to obtain the desired concentrations of the associated acids.
Thus, before starting modeling, it can be helpful to get a panoramic view of both all metabolic ways and specific ways in E.coli. The following metabolic network represents all of the known metabolites and metabolic pathways for Escherichia coli K12 MG1655 (best known model) as of today. It was obtained from the KEGG database. Our first step was to identify the pathways in which our molecules take part, in order to have a clear understanding of their role and effect.

Figure 1: Kegg Metabolic pathways - Escherichia coli K-12 MG1655

Formate network

Formate is naturally produced by E. coli but at a level that is quite low. Our project requires that Apicoli produces out highter yield. Hence we had to optimize its biosynthesis by studying the genes coding for the enzymes involved in the pathway. We decided to focus our efforts on the Pyruvate Formate Lyase (PFL), the enzyme that causes degradation of pyruvate, thus yielding formate.

The enzyme Pyruvate Formate Lyase catalyzes the transfer of coenzyme-A on pyruvate, leading to the conversion into formate and acetyl-CoA.

Figure 2: Reaction catalyzed by the enzyme Pyruvate Formate Lyase (PFL), EC 2.3.1.54

The subnetwork presented below was obtained from MetExplore platform and presents all reactions from the KEGG and ByoCyc databases involved in the production or consumption of formate. This map will help us predict the likely consequences of a PFL-induced formate overproduction in Apicoli. In fact, formate is harmful to our bacterium and is normally metabolized to other products to prevent toxicity effects and redox imbalance. We thus have to find the balance between producing enough formate to kill the varroa without killing Apicoli.

Figure 3: Metabolic network of all reactions involving formate happening in E. coli

Butyrate network

Contrary to formate, butyrate is not naturally produced by E. Coli. E. coli possesses an enzyme called (Butyryl-coA transferase (or Acetate-coA transferase) that yields butyrate, but this reaction cannot happen spontaneously in the organism due to the lack of Butanoyl-coA, its substrate (Fig. 5). Indeed, study of the biosynthesis pathway shows that the enzymes responsible for Butanoyl-coA production (EC.2.1.3.19 phosphate butyryltransferase , EC.1.3.1.44 trans-2-enoyl-CoA reductase (NAD+) , etc.) cannot be found in our strain. Hence, in order to obtain butyrate, we chose to introduce a complete production pathway relying on genes coming from different organisms in Apicoli (see Attract).

Figure 4: Metabolic network of all reactions involving butyrate happening in E. coli

Figure 5: Kegg Metabolic pathways - Butanoate metabolism - Escherichia coli K-12 MG1655
If green background, enzyme described by its EC number is naturally present in E.coli. In return if blank background.

Flux Balance Analysis (FBA)

Presentation

To go further in the development of our project, we decided to use a method called Flux Balance Analysis (FBA) and Flux Variability Analysis (FVA). It is based on the model EC_iJO1366 [1]. This is the most recent model concerning E. coli K12 MG1655. It is a stoichiometric model defining all metabolic ways known to this day in this particular strain. It has been modificated by introducing the following pathways. Here you will find the associated XML file. The modifications we made are such that the described strain is now capable of producing butyrate.
Our modeling aims at determining the maximum butyrate and formate quantities our strain would be able to produce, depending on two initial conditions: oxygen and glucose flux. We set them as follows:

  • Maximal oxygen entry flux: 5 mmol.gDW-1.h-1
  • Maximal glucose entry flux: 0.3998 mmol.gDW-1.h-1
  • pH: 7

It is interesting to note that FBA provides the produced and consumed metabolites in a quantitative way.
The setpoint for oxygen flux was choosen to simulate microaerobic conditions. The glucose flux setpoint was chosen according to the results of our tests with the Biosilta kit (see “Preliminary part”).
This kit was used to ensure a stable availability of glucose over time for our bacteria. Indeed the medium contains enzymes capable of catabolizing starch, thus gradually releasing glucose in the culture.
For known initial quantities of starch and enzymes, we are able to deduce the glucose release flux. Thus, we chose the appropriate enzyme concentration and polymer quantity in order to have a glucose rate of 0.3998 mmol.gDW-1.h-1.

The model provides results for the metabolites flux in mmol.gDW-1.h-1 but it is difficult to get an idea of the actual quantity this represents so we will convert it to mmol/L. To do this we chose a length of time of 13 hours for the day and 7 hours for the night, since our solution will primarily be deployed during summer. This means that butyric acid production time is estimated to 13 hours and formic acid production time to 7 hours.
Concerning biomass it is more complicated since the bacterium grows all the time. Thus in order to ensure a minimum production, biomass concentration (X) at the beginning is defined to X = 0.56 gDW.L-1.

$$ \textrm{Real unit} (mmol.L^{-1})= \textrm{Model unit} (mmol.gDW^{-1}\cdot h^{-1})\times X \times time $$

  • X: 0,56 gDW.L-1
  • time (formic acid): 13h
  • time butyric acid: 7h

Acid/Base Balance

Another parameter has to be taken into account, and this is the acid/base balance. Indeed, our bacteria will produce the base but we are actually interested in the acid concentration. The formula below is used:

$$pH = pKa + log\frac{C_b}{C_a}$$

  • pH: the medium used is buffered so for low acid concentrations pH = 7 is considered
  • pKa: 3,7 for formic acid and 4,81 for butyric acid
  • Cb: base concentration
  • Ca: acid concentration

Finally, it should not be forgotten that FBA methods rely on a stoichiometric model. This implies that some biological realities might be overlooked.
For example, it has been demonstrated that PFL (Pyruvate Formate Lyase), one of the enzymes involved in the production of formate, is inhibited in aerobic conditions [3], a fact that is not taken into account by the Flux Balance Analysis. This can result in the model predicting a higher formate production than what will actually be observed.

BUTYRATE

Thus under the described conditions, our first object was to try to optimize butyrate production flux. As was said before, the support file of the stoichiometric model was modified in such a way as to add the lacking butyrate biosynthesis enzymes. This was done to have a model as close to our in vivo system as possible.
As expected, when we optimize the objective function (butyrate production), it shows an optimum when all the carbon available is used for butyrate production, and none goes into biomass growth. So when there is no growth, butyrate production is equal to ~0.016 mmol.L-1, see Fig.1 (~ Flux value of 0.352 mmol.gDW-1.h-1).

Figure 1: Butyric acid produced (mmol/L) depending on growth rate

Thus under the described conditions, our first object was to try to optimize butyrate production flux. As was said before, the support file of the stoichiometric model was modified in such a way as to add the lacking butyrate biosynthesis enzymes. This was done to have a model as close to our in vivo system as possible.
If we set a minimal value for growth rate, butyrate production drops (Fig. 2), as it can be seen on the graph below obtained for different FBA simulations. We have tried different minimal growth rates up to 0.025 which is the maximal value obtained when the objective function under FBA simulation is biomass production.

Figure 2: Butyrate flux depending on minimal growth rate

Finally, to understand the effect of the initial glucose concentration on the maximum butyrate quantity we can expect, we tested different glucose concentrations between 0.4 and 15 mmol.gDW-1.h-1 using FVA method (Flux Variability Analysis). Indeed, 0.4 mmol.gDW-1.h-1 corresponds to the glucose flux obtained with the Biosilta Kit for a culture time of 14 days, while 15 mmol.gDW-1.h-1 is the flux needed to reach maximum growth rate (same rates are applicable to formate, Data not shown. FBA, objective function = biomass production, Result = 0.0268).
As expected, the higher the initial glucose concentration is, the higher the level of produced metabolites will be.

Figure 3: Butyrate flux depending on growth rate

FORMATE

The maximal production implies no growth and is equal to ~ 0.006 mmol.L-1, Fig. 4 (~ flux value of 2,917 mmol.gDW-1.h-1).

Figure 4: Formic acid produced for different growth rate

As with butyrate, formate biosynthesis is unfavorably altered when a high level of constraint is applied to the minimal growth rate (Fig. 5). And formate production will be more important when glucose availability is higher (Fig. 6).

Figure 5: Formate flux (mmol.gDW-1.h-1) depending on growth level

Figure 6: Formate flux (mmol.gDW-1.h-1) depending on growth rate

Discussion & Optimisation

As a reminder, required acid concentrations for our system to be effective are:

  • butyric acid: 0.436 mol/L (436 mmol/L) (see results in vivo)
  • formic acid: 0.010 mol/L (10 mmol/L) [2],[3]

The results presented above show that we won’t be able to obtain these concentrations without optimizing our system.
In particular, we can see that to optimize either butyrate or formate production, growth level should be as low as possible. Our first solution would thus be to exert a control on this growth rate by limiting the availability of the nitrogen source in our bacteria’s environment. To test the relevance of this method we used FVA (Fig 7.).

Figure 7: NH4 flux (mmol.gDW-1.h-1) depending on growth rates

By combining this graph with the precedent results, we are able to define the nitrogen concentration required to get the wanted growth rate, which in its turn depends on the associated butyrate and formate quantities.

Another solution to optimize the metabolites production would be to change the initial carbon source. That’s why we tested different possible carbon sources and optimized either formate or butyrate production as the objective function, keeping initial glucose flux at 0.3998 mmol.gDW-1.h-1. Results (Fig. 8) thus show the maximal concentrations of either butyric or formic acid we can expect (let’s note that the method used suggests that there should be no cellular growth).

Figure 8: Butyric and formic acid productions depending on the carbon source

According to this modeling, the use of lactose, maltose or melto-triose/-pentose/-hexaose could enable us to obtain the required formic acid concentration. More generally and with no suprise, production of formic and butyric acids will be as higher as sugar is a high carbon source. As for butyric acid, even though the aforementioned sugars yield a higher final concentration, it is still not enough. To meet our expectations, it would be interesting to work on the parameters (size, volume…) of our device and/or our trap.

Finally, we also can adjust the pH value to increase final acids concentrations. Indeed, so far, pH has been set at 7. However, for example, if we set the pH value at 6, we can increase formic and butyric acids concentrations by a factor of 10 (Fig. 9).



Figure 9: Formic (A) and Butyric (B) acids [mmol/L] depending on pH for different growth rates.
Concentrations will be higher with low growth rates and pH decreasing.

Annexe: Produced and consumed metabolites

Objective function: butyrate production

Consommation Production
M_cl_e Chloride 2.476E-5 M_5mtr_e 5-Methylthio-D-ribose 3.372E-5
M_glc_DASH_D_e D-Glucose 0.3998 M_but_e Butyrate (n-C4:0) 0.28610836
M_mg2_e Cu2+ 3.37E-6 M_co2_e CO2 1.0498941
M_cu2_e Cu2+ 3.37E-6 M_h2o_e H2O 1.4649394
M_cbl1_e Cob(I)alamin 1.115E-6 M_amob_c S-Adenosyl-4-methylthio-2-oxobutanoate 1.0E-8
M_pi_e Phosphate 0.00463573 M_h_e H+ 0.0443632
M_mobd_e Molybdate 6.85E-7
M_zn2_e Zinc 1.62E-6
M_ni2_e nickel 1.535E-6
M_mn2_e Mn2+ 3.29E-6
M_k_e potassium 9.2845E-4
M_cobalt2_e Co2+ 1.2E-7
M_so4_e Sulfate 0.001259915
M_fe2_e Fe2+ 7.7635E-5
M_nh4_e Ammonium 0.052531395
M_o2_e O2 0.75361237
M_ca2_e Calcium 2.476E-5

Objective function: formate production

Consommation Production
M_cl_e Chloride 2.476E-5 M_5mtr_e 5-Methylthio-D-ribose 3.372E-5
M_h2o_e H2O 0.063322984 M_amob_c S-Adenosyl-4-methylthio-2-oxobutanoate 1.0E-8
M_co2_e CO2 0.19225993 M_h_e H+ 2.4309506
M_glc_DASH_D_e D-Glucose 0.3998 M_5drib_c 5'-deoxyribose 1.155E-6
M_mg2_e magnesium 4.1265E-5 M_4crsol_c p-Cresol 1.115E-6
M_cu2_e Cu2+ 3.37E-6 M_mththf_c (2R,4S)-2-methyl-2,3,3,4-tetrahydroxytetrahydrofuran 6.7E-6
M_cbl1_e Cob(I)alamin 1.115E-6 M_for_e Formate 2.3865874
M_pi_e Phosphate 0.00463573
M_mobd_e Molybdate 6.85E-7
M_ni2_e nickel 1.535E-6
M_zn2_e Zinc 1.62E-6
M_mn2_e Mn2+ 3.29E-6
M_k_e potassium 9.2845E-4
M_cobalt2_e Co2+ 1.2E-7
M_so4_e Sulfate 0.001259915
M_fe2_e Fe2+ 7.7635E-5
M_nh4_e Ammonium 0.052531395
M_o2_e O2 0.99086045
M_ca2_e Calcium 2.476E-5

References


  • [1] Orth JD1, Conrad TM, Na J, Lerman JA, Nam H, Feist AM, Palsson BØ. A comprehensive genome-scale reconstruction of Escherichia coli metabolism. Mol Syst Biol. 2011 Oct 11. 7:535
  • [2] Methods for attracting honey bee parasitic mites US 8647615 B1 See more
  • [3] Imdorf, A; Charriere, J; Rosenkranz, P (1999). Varroa control with formic acid. Coordination in Europe of research on integrated control of varroa mite in honey bee colonies, Agriculture Research Centre, Merelbeke, Belgium, Commission of the European Communites. pp. 18-26. See more