Difference between revisions of "Team:Westminster/Practices"

Line 84: Line 84:
 
<br>
 
<br>
  
 +
<h5>INTERVIEW WITH LES BIRCHMORE FROM FULLER’S BREWERY (07/09/15)</h5>
 +
<p>
 +
<b>How much waste water is produced?</b></p>
 +
<p class="answer">
 +
On average approximately 600m<sup>3</sup> of waste water is produced daily.
 +
There are 4 outlets around the brewery at various points. The effluent is collected in there and from these outlets Thames Water takes a sample in order to calculate the amount of waste water estimated to be released and discharged into the sewage for Thames Water to clean.<br>
 +
Fuller’s uses 250000 hectare liters annually in their treatment of the reactors used in beer production. Used to use water from wells. However this is no longer the case as they have ben comprised and subject to contamination.  The process used, in order to clean their bioreactors, is:</p>
 +
<ul class="answer">
  
 +
<li> pre-rinse – clears solid material from the reactor
 +
<li> detergent - washes away scum, debris build up
 +
<li> Final rinse – measure pH
 +
</ul>
 +
<p class="answer">
 +
Thames Water make regular (not sure how frequently in terms of time scale) spot samples in order to assess the cost of cleaning the waste water produced by Fuller’s. The way this is measured is through the Mogden formula, which is used in order to calculate trade effluent. The greatest cost is COD (chemical oxygen demand).
 +
<br>
 +
Charges for trade effluent are based on the Mogden formula, which is<br><br>
 +
<b>
 +
Charge per unit of effluent = R + [(V + Bv) or M] + B(Ot/Os) + S(St/Ss)<sup>7</sup>
 +
</b><br>
 +
Where<br>
 +
<b>R</b> = reception and conveyance charge [p/m<sup>3</sup>]<br>
 +
<b>V</b> = primary treatment (volumetric) charge [p/m<sup>3</sup>]<br>
 +
<b>Bv</b> = additional volume charge if there is biological treatment [p/m<sup>3</sup>]<br>
 +
<b>M</b> = treatment and disposal charge where effluent goes to sea outfall [p/m<sup>3</sup>] <br>
 +
<b>B</b> = biological oxidation of settled sewage charge [p/kg] <br>
 +
<b>Ot</b> = Chemical oxygen demand (COD) of effluent after one hour quiescent settlement at ph 7<br>
 +
<b>Os</b> = Chemical oxygen demand (COD) of crude sewage one hour quiescent settlement<br>
 +
<b>S</b> = treatment and disposal of primary sewage sludge charge [p/kg] <br>
 +
<b>St</b> = total suspended solids of effluent at ph 7 [mg/litre] <br>
 +
<b>Ss</b> = total suspe nded solids of crude sewage [mg/litre] <br>
 +
<br><br>
 +
OFWAT (Office of Water Services). (2015). <i>Modgen formula</i>. [online]. Available at: <br><a href="https://www.ofwat.gov.uk/nonhousehold/yourwaterbill/hownonhousehold/trade/mogden" target="_blank">
 +
https://www.ofwat.gov.uk/nonhousehold/yourwaterbill/hownonhousehold/trade/mogden
 +
</a>
 +
<br>
 +
[Accessed on 7<sup>th</sup> September, 2015]
 +
<br><br>
 +
COD (chemical oxygen demand) is used as a measure in order to detect levels of organic compounds in water, such as effluent from Brewery waste water. COD and SS (settle able solids) is dictated to Fuller’s brewery regarding the cost. Whereas the other costs of the factors of Modgen formula are so small that they are almost insignificant.
 +
</p>
 +
<p><b>
 +
Where is the waste water discharged?</b></p>
 +
<p class="answer">
 +
The wastewater goes directly down to the public sewer. The effluent is then treated downstream at Thames Water. Fuller’s incurs the cost for this clean up.
 +
</p>
 +
<p><b>
 +
What measures does Fuller’s have in place for reducing its carbon footprint?</b></p>
 +
<p class="answer">
 +
 +
New collection tank which will have the capacity to collect and store 50000 litres of effluent (waste water). This will be collected and removed 3 times a week.
 +
<br>
 +
When the new collection tank arrives it may require partial treatment using a DAF (Dissolved Air Flotation) unit. This can be used to reduce COD levels. It works by placing an agent in the unit in order to folliculate. Agents used unknown, its aim is to reduce bulk by scraping the scum off the surface of the wastewater in the unit, thus reducing the COD levels.<br>
 +
Offered effluent treatment plant that deals with high volume. Has reduced foot print.
 +
</p>
 +
<p><b>
 +
How much electricity is required to power Fuller’s Brewery?</b></p>
 +
<p class="answer">
 +
 +
The amount of electricity used at Fuller’s- under megawatt per day. Last week= 1000 kilo watt per day (megawatt).The fridges are the highest demand of electrical output. Fridges are on all the time. The temperature of the fridges -3.30C.
 +
<br>
 +
The cost of water is £1 in and £2 out due to the effluent.<br>
 +
Used to use the well, capped now. As a result effluent prices were lower when using the wells, as the excess water provided from the wells washed away effluent. Therefore, the effluent comprised mostly of water. The wells are now capped as they were compromised due to cracked pipe which lead to contamination (as mentioned previously). The water from the wells also used to act as fridges, cooling the beer. Therefore, not only has the cost of effluent increased, so too has electrical demand which is now used in order to cool the beer.</p>
 +
<p><b>
 +
What are the regulations?</b></p>
 +
<p class="answer">
 +
 +
Regulations:<br>
 +
pH<br>
 +
COD<br>
 +
Solids- (SS) settle able solids allow to settle <br>
 +
            Shake up the settle able solids and take a sample <br>
 +
          -(TDS) totally dissolved solids<br>
 +
Phosphorus<br>
 +
Residence time for MFCs high. Upscale issues. <br><br>
 +
Effluent treatment plant- microorganisms used in order to treat effluent. After a year the microorganisms no longer active. Not known what occurred in order to stop the microorganisms to stop working. Microorganisms line the drain and grow forming a biofilm in order to act to breakdown the wastewater.</p>
 +
<h5>
 +
THAMES WATER INTERVIEW WITH DR PHILLIP THOMAS (07/09/15)</h5>
 +
<p>Wastewater treatment
 +
<b>What are the methods used in order to treat wastewater?</b></p>
 +
<p class="answer">
 +
 +
1st Stage is referred to as the PRELIMINARY TREATMENT<br>
 +
This stage is mostly a physical screening. Any material/object over 6mm is held back. Such items include sanitary towels, nappies, wet wipes, leaves and such debris. Flow that is less than 6mm is able to travel through to the next stage. This stage also includes a gravel trap. The flow of the effluent is reduced to allow heavy waste to drop. The fluid flows on to the second stage. The materials collected are discarded. <br><br>
 +
2nd Primary Sedimentation<br>
 +
The flow is also slow during this phase so that the heavier materials collect at the bottom. This is referred to as sludge. This sludge is then collected. The liquid, also known as the settled sewage, then goes on for secondary treatment of which there are two methods: <br><br>
 +
-Trickling, the waste water literally trickles out from the outlet and over a solid media, comprising primarily of rocks, which is covered in a biofilm. The wastewater is sprayed in such a way that it is distributed evenly over the surface of the beads through a rotating arm lined with nozzles. This is the first step in the initial degradation of compounds in the wastewater. As the effluent trickles over the beads it flows through to the lower level which is populated with nitrifying bacteria. The bacteria aid the removal of ammonia through oxidation of ammonia to nitrite to nitrate. <br><br>
 +
Wastewater System (2013). <i>Trickling Filter in Wastewater Plant.</i> [online]. Available at:
 +
<br>
 +
<a href="http://www.wastewatersystem.net/2009/05/trickling-filter-in-wastewater-plant.html " target="_blank">
 +
http://www.wastewatersystem.net/2009/05/trickling-filter-in-wastewater-plant.html
 +
</a>
 +
<br>[Accessed on 7th September, 2015] <br>
 +
-Aeration lanes which are large tanks in which air is pumped and thus an aerobic process. <br>
 +
The next stage is the FINAL EFFLUENT in which the water is treated before being discharged into the river. This is also another settlement stage. The sludge that is collected from this process is secondary sludge and is treated with the rest of the sludge from earlier treatment steps.<br>
 +
The process of removing and digesting the SLUDGE is anaerobic. Some of the sludge is siphoned off to be recycled to be used as fertilizer for agriculture. The byproduct of the digestion of the sludge is biogas. The biogas consists of approximately 65% biomethane, the remaining gases are comprised of carbon dioxide, hydrogen gas and other gases. These biogases are collected as used in CHP (combined heat and power) such as electricity and heat. Another stage in this process is the thermal heating of the sludge to solidify it. When burned this releases heat that can be captured and recycled as electricity.</p>
 +
<p><b>What toxic compounds are found and how are they treated?</b></p>
 +
<p class="answer">
 +
 +
Toxic compounds are measured and discharged from industry- trade effluent. There are regulations limiting the quantities and compounds that industry can release. However these regulations are more difficult to control for domestic use as they cannot be measured. <br>
 +
An example of an industrial waste toxic compound is FOG (fats/oils/grease) from Food manufactures. Therefore they are limited to how much they can release. Another example is ammonia concentration, and there are limited COD demands. <br>
 +
Phillip did not offer up any chemicals that are used in the treatment. Only the methods/techniques used and the stages (as mentioned prior). <br>
 +
Phillip Thomas could not answer all my questions and said that he would get back shortly. In terms of how much water is used: <br>
 +
At the Beckton plant (the largest plant) it is estimated that 3 million people (measurement in terms of population equivalent) use the plant.</p>
  
  
Line 92: Line 194:
  
  
 +
<!--
 
<p>iGEM teams are unique and leading the field because they "go beyond the lab" to imagine their projects in a social/environmental context, to better understand issues that might influence the design and use of their technologies.</p>
 
<p>iGEM teams are unique and leading the field because they "go beyond the lab" to imagine their projects in a social/environmental context, to better understand issues that might influence the design and use of their technologies.</p>
 
<p>Teams work with students and advisors from the humanities and social sciences to explore topics concerning ethical, legal, social, economic, safety or security issues related to their work. Consideration of these Human Practices is crucial for building safe and sustainable projects that serve the public interest. </p>
 
<p>Teams work with students and advisors from the humanities and social sciences to explore topics concerning ethical, legal, social, economic, safety or security issues related to their work. Consideration of these Human Practices is crucial for building safe and sustainable projects that serve the public interest. </p>
Line 147: Line 250:
  
  
−
 
+
-->
  
 
   
 
   
 
</div><div id="spacer"></div></body></html>
 
</div><div id="spacer"></div></body></html>

Revision as of 14:18, 10 September 2015

Human Practices

Questions were answered by Shengchang Su, PhD. Director at Microbial Robotics.
Website : http://microbialrobotics.com/


Business

1) Are there any national or international laws that we should consider when dealing with genetically modified organisms?
Of course “Yes”! GMOs are subjected to all federal and governmental laws and regulations, which vary from nation to nation. Below are two links for some information on GMO legislations in the EU and US, respectively.

http://ec.europa.eu/food/plant/gmo/new/legislation/index_en.htm
http://www.loc.gov/law/help/restrictions-on-gmos/usa.php

2) What are the key points of your business model and how does it differ from other biotechnology companies?
Microbial Robotics has done some work on MFC development. Our current business model is open innovation, open science, open technology and open business.

3) What are the 3 most important issues a synthetic biology company in its infancy should consider?
Product market, research funding, team and business plan.

4) How to prevent our project idea from infringement when we are introducing it to potential sponsors without any secured intellectual property protections at this stage?
In general, signing a Non-Disclosure Agreement (NDA) will protect you from infringement.

5) How much does biocontainment effect the feasibility/success of their products? Is it a necessary factor in determining the success of the product? Biocontainment provides a layer of protection and makes your products better and competitive if biosafety concern exists, but is not a must in determining the success of the product.



Ethics

1) Ethically, are there fundamental issues with creating new species?
Yes. It is hard to predict what new species will bring to the environment and human beings in the long term. Once the evolutionarily established balance is disrupted, it will be a disaster.

2) How would you answer the question: ‘Is not the experimentation of transgenics playing God?’
No. God endows the human beings with talents to explore the nature and live in harmony with nature.



MFC

1) How to ensure a continuously operating microfluidic MFC (steady current) in contrast to a batch operation of an MFC ? It is a challenging question.
Technically, it is difficult to operate MFC continuously with steady current output in comparison with the other.
2) When using genetically modified organisms in open environment, what biocontainment strategies would you say are the most applicable?
Synthetic amino acids-dependent genomically recoded organisms.

INTERVIEW WITH LES BIRCHMORE FROM FULLER’S BREWERY (07/09/15)

How much waste water is produced?

On average approximately 600m3 of waste water is produced daily. There are 4 outlets around the brewery at various points. The effluent is collected in there and from these outlets Thames Water takes a sample in order to calculate the amount of waste water estimated to be released and discharged into the sewage for Thames Water to clean.
Fuller’s uses 250000 hectare liters annually in their treatment of the reactors used in beer production. Used to use water from wells. However this is no longer the case as they have ben comprised and subject to contamination. The process used, in order to clean their bioreactors, is:

  • pre-rinse – clears solid material from the reactor
  • detergent - washes away scum, debris build up
  • Final rinse – measure pH

Thames Water make regular (not sure how frequently in terms of time scale) spot samples in order to assess the cost of cleaning the waste water produced by Fuller’s. The way this is measured is through the Mogden formula, which is used in order to calculate trade effluent. The greatest cost is COD (chemical oxygen demand).
Charges for trade effluent are based on the Mogden formula, which is

Charge per unit of effluent = R + [(V + Bv) or M] + B(Ot/Os) + S(St/Ss)7
Where
R = reception and conveyance charge [p/m3]
V = primary treatment (volumetric) charge [p/m3]
Bv = additional volume charge if there is biological treatment [p/m3]
M = treatment and disposal charge where effluent goes to sea outfall [p/m3]
B = biological oxidation of settled sewage charge [p/kg]
Ot = Chemical oxygen demand (COD) of effluent after one hour quiescent settlement at ph 7
Os = Chemical oxygen demand (COD) of crude sewage one hour quiescent settlement
S = treatment and disposal of primary sewage sludge charge [p/kg]
St = total suspended solids of effluent at ph 7 [mg/litre]
Ss = total suspe nded solids of crude sewage [mg/litre]


OFWAT (Office of Water Services). (2015). Modgen formula. [online]. Available at:
https://www.ofwat.gov.uk/nonhousehold/yourwaterbill/hownonhousehold/trade/mogden
[Accessed on 7th September, 2015]

COD (chemical oxygen demand) is used as a measure in order to detect levels of organic compounds in water, such as effluent from Brewery waste water. COD and SS (settle able solids) is dictated to Fuller’s brewery regarding the cost. Whereas the other costs of the factors of Modgen formula are so small that they are almost insignificant.

Where is the waste water discharged?

The wastewater goes directly down to the public sewer. The effluent is then treated downstream at Thames Water. Fuller’s incurs the cost for this clean up.

What measures does Fuller’s have in place for reducing its carbon footprint?

New collection tank which will have the capacity to collect and store 50000 litres of effluent (waste water). This will be collected and removed 3 times a week.
When the new collection tank arrives it may require partial treatment using a DAF (Dissolved Air Flotation) unit. This can be used to reduce COD levels. It works by placing an agent in the unit in order to folliculate. Agents used unknown, its aim is to reduce bulk by scraping the scum off the surface of the wastewater in the unit, thus reducing the COD levels.
Offered effluent treatment plant that deals with high volume. Has reduced foot print.

How much electricity is required to power Fuller’s Brewery?

The amount of electricity used at Fuller’s- under megawatt per day. Last week= 1000 kilo watt per day (megawatt).The fridges are the highest demand of electrical output. Fridges are on all the time. The temperature of the fridges -3.30C.
The cost of water is £1 in and £2 out due to the effluent.
Used to use the well, capped now. As a result effluent prices were lower when using the wells, as the excess water provided from the wells washed away effluent. Therefore, the effluent comprised mostly of water. The wells are now capped as they were compromised due to cracked pipe which lead to contamination (as mentioned previously). The water from the wells also used to act as fridges, cooling the beer. Therefore, not only has the cost of effluent increased, so too has electrical demand which is now used in order to cool the beer.

What are the regulations?

Regulations:
pH
COD
Solids- (SS) settle able solids allow to settle
Shake up the settle able solids and take a sample
-(TDS) totally dissolved solids
Phosphorus
Residence time for MFCs high. Upscale issues.

Effluent treatment plant- microorganisms used in order to treat effluent. After a year the microorganisms no longer active. Not known what occurred in order to stop the microorganisms to stop working. Microorganisms line the drain and grow forming a biofilm in order to act to breakdown the wastewater.

THAMES WATER INTERVIEW WITH DR PHILLIP THOMAS (07/09/15)

Wastewater treatment What are the methods used in order to treat wastewater?

1st Stage is referred to as the PRELIMINARY TREATMENT
This stage is mostly a physical screening. Any material/object over 6mm is held back. Such items include sanitary towels, nappies, wet wipes, leaves and such debris. Flow that is less than 6mm is able to travel through to the next stage. This stage also includes a gravel trap. The flow of the effluent is reduced to allow heavy waste to drop. The fluid flows on to the second stage. The materials collected are discarded.

2nd Primary Sedimentation
The flow is also slow during this phase so that the heavier materials collect at the bottom. This is referred to as sludge. This sludge is then collected. The liquid, also known as the settled sewage, then goes on for secondary treatment of which there are two methods:

-Trickling, the waste water literally trickles out from the outlet and over a solid media, comprising primarily of rocks, which is covered in a biofilm. The wastewater is sprayed in such a way that it is distributed evenly over the surface of the beads through a rotating arm lined with nozzles. This is the first step in the initial degradation of compounds in the wastewater. As the effluent trickles over the beads it flows through to the lower level which is populated with nitrifying bacteria. The bacteria aid the removal of ammonia through oxidation of ammonia to nitrite to nitrate.

Wastewater System (2013). Trickling Filter in Wastewater Plant. [online]. Available at:
http://www.wastewatersystem.net/2009/05/trickling-filter-in-wastewater-plant.html
[Accessed on 7th September, 2015]
-Aeration lanes which are large tanks in which air is pumped and thus an aerobic process.
The next stage is the FINAL EFFLUENT in which the water is treated before being discharged into the river. This is also another settlement stage. The sludge that is collected from this process is secondary sludge and is treated with the rest of the sludge from earlier treatment steps.
The process of removing and digesting the SLUDGE is anaerobic. Some of the sludge is siphoned off to be recycled to be used as fertilizer for agriculture. The byproduct of the digestion of the sludge is biogas. The biogas consists of approximately 65% biomethane, the remaining gases are comprised of carbon dioxide, hydrogen gas and other gases. These biogases are collected as used in CHP (combined heat and power) such as electricity and heat. Another stage in this process is the thermal heating of the sludge to solidify it. When burned this releases heat that can be captured and recycled as electricity.

What toxic compounds are found and how are they treated?

Toxic compounds are measured and discharged from industry- trade effluent. There are regulations limiting the quantities and compounds that industry can release. However these regulations are more difficult to control for domestic use as they cannot be measured.
An example of an industrial waste toxic compound is FOG (fats/oils/grease) from Food manufactures. Therefore they are limited to how much they can release. Another example is ammonia concentration, and there are limited COD demands.
Phillip did not offer up any chemicals that are used in the treatment. Only the methods/techniques used and the stages (as mentioned prior).
Phillip Thomas could not answer all my questions and said that he would get back shortly. In terms of how much water is used:
At the Beckton plant (the largest plant) it is estimated that 3 million people (measurement in terms of population equivalent) use the plant.