Difference between revisions of "Team:KU Leuven/Research/Results"

Line 318: Line 318:
 
<div id=figure6>Figure 4</div>
 
<div id=figure6>Figure 4</div>
 
First estimation of the OHHL standard curve. click to enlarge</h4>
 
First estimation of the OHHL standard curve. click to enlarge</h4>
 +
</div>
 +
</div>
 +
 +
<p>In the second experiment, a range between 0.01 and 0.10 mM was investigated. The difference with the previous experiment is that the OD was first measured in 1 cm cuvettes and that the violacein was afterwards isolated. In this way, the plate reader does not contain cells. This optimisation is done, because we noticed in the previous experiment that violacein was produced more quickly in a culture tube than in a microtiterplate, probably due to the amount of supplied oxygen. Another reason for this working method is because estimating the amount of cells is more standardised by using cuvettes of 1 cm than using a microtiterplate.
 +
</p>
 +
<p> Table 1 contains the processed values of the absorbance measurements. The processing is similar to the previous experiment. First the absorbance of DMSO was subtracted from the absorbance of the standards. Thereafter, these values were divided by the OD measured in 1 cm cuvettes. And finally, these values were corrected by putting the standard with a concentration of 0 mM OHHL in the origin.
 +
</p>
 +
 +
<p> Here comes table 1 </p>
 +
 +
<p>In figure 5, our standard curve is plotted. A linear correlation between the absorbance and the concentration OHHL can be found. The variance of the technical replicates, visualised by the error bars, and the variance of the regression curve, shown by the R^2 value, can be explained by pipetting and measuring errors. Also, working with biological cells generates a background noise. This standard curve could give an estimation of bacterial AHL production. But it is important to keep in mind that there is background noise. Optimisation of this curve can be done by making more biological and technical replicas.
 +
</p>
 +
 +
<div class ="center">
 +
<div id="imageAHL5">
 +
    <a class="example-image-link" href="https://static.igem.org/mediawiki/2015/2/24/KU_Leuven_ResultOHHL4.jpeg"
 +
    data-lightbox="example-set" data-title="acceptor_cell">
 +
    <img class="example-image" src="https://static.igem.org/mediawiki/2015/2/24/KU_Leuven_ResultOHHL4.jpeg" width="50%"></a>
 +
<h4>
 +
<div id=figure6>Figure 5</div>
 +
Standard curve ranging from 0 to 0.1 mM. The error bars represent the standard deviation between the technical replicates.</h4>
 
</div>
 
</div>
 
</div>
 
</div>

Revision as of 22:41, 18 September 2015

Results

Double Knockouts

The Centre of Microbial and Plant Genetics (KU Leuven) provided us with three E. coli K-12 strains with each one representing the knockout for the genes tar, tsr or cheZ. The kanamycin cassette of the tar knock-out strain was removed by the enzyme flippase on pCP20. This excision was checked by PCR. The original knock-out strain of tar was used as a positive control and a band at 1232 bp is expected. If the cassette is removed, a band at 438 bp is visible. Ten colonies were tested and all have lost their cassette (Figure 1).


knockout

Figure 1
Excision of the kanamycin cassette of the knock-out of tar. As a positive control, the original knock-out of tar was used which should show a band at 1232 basepairs. If the kanamycin cassette is removed, a band at 438 bp will be visible. Besides, a 1 kb Plus DNA ladder of GeneRuler was used.


The PCP20 plasmid contains a temperature sensitive origin of replication. To remove this plasmid, the colonies were grown overnight at 42°C. PCP20 is resistant to ampicillin, this characteristic is useful to verify the removal of the plasmid. Single colonies were streaked on one LB plate with and one without ampicillin. Figure 2 proves that the PCP20 plasmid is removed in all plasmids.


knockout

Figure 2
Test to prove that the ampicillin resistant PCP20 plasmid is removed. The left plate contains ampicillin, the right plate contains no antibiotic.

We kindly received lysate from Oscar Torres. Our donor strains (ΔcheZ and Δtsr) were infected with this lysate. In figure 3, the plaques as result of the infection is visible. Some of the plaques will contain DNA of ΔcheZ and Δtsr due the sloppy packaging mechanism of the phage P1.


knockout plaques

Figure 3
Figure 3: Plaques after infection of our donor strains (ΔcheZ and Δtsr).


The lysate was plated out on LB plates as control. No colonies are visible in figure 4, this means that are lysate is not contaminated by cells.


Figure 4

Control to check if the lysate of ΔcheZ and Δtsr is not contaminated with cells.


The plaques of the acceptor strains were extracted and different amounts of lysate were used to infect our donor strain (Δtar). The result was plated out on kanamycin plates to select the right colonies (Figure 4).


Figure 5
Infection of the acceptor strain (Δtar) by lysate originating from donor strains (ΔcheZ and Δtsr)


Our Tar knock-out cells without the kanamycin cassette were also plated out on kanamycin as a control. In figure 5 is visible that there is no growth.


Figure 6
Tar knock-out cells without the kanamycin cassette were plated out on kanamycin plates as control.


Different colonies were screened to confirm the knock-out in cheZ. If the cassette is not there, a band should show at 863 bp. If the cassette is still there, there should be a band at 581 bp. As a positive control we used a knockout Tar strain which does not contain the kanamycin cassette anymore.


Figure 7
PCR to check that cheZ is knocked out in Δtar. The positive control is a knock-out in tar which lost the plasmid.


To confirm that the knock-out in tsr was successful, a PCR was performed. A knock-out in tsr should give a band at 1304 bp while the original gene should give a band at 1964 bp. As positive control, a knock-out in tar which lost the kanamycin cassette was used.


Figure 8
PCR to check that tsr is knocked out in Δtar. The positive control is a knock-out in tar which lost the plasmid.


Especially in the new constructed ΔtarΔcheZ, the chance exists that the knock-out in tar is undone due the sloppy packaging mechanism of the phage P1. Therefore, the knock-out in tar is checked again by PCR (see figure 9). The first positive control (c1) is a tar knock-out who has lost the kanamycin cassette. As a second control (c2), a cheZ knock-out strain was used. The gel of figure 8 shows that all our ΔtarΔtsr strains are ok, while only two of the ΔtarΔcheZ are still ok.


Figure 9
PCR to check the knock-out in tar after the P1 transduction


Finally, the all the genes of the operon containing cheZ were checked by PCR (see figure 10). As positive control the tar knock-out which does not contain the plasmid anymore was used, but each time with the primers corresponding to the checked gene. The negative control contains the mastermix but without template.


Figure 10
PCR to check the operon of ΔtarΔcheZ

Motility Test

The cheZ knock-outs are not able to swim anymore. Therefor we performed a phenotypical motility test.The result is visible in figure 7.


Figure 10
Motility test of our cheZ knock-out

Gibson Assembly Method

Here comes an interesting text

OHHL detection

In the first step, the Chromobacterium violacein CV026 was grown with different concentrations of OHHL. The C. violacein CV026 was added to the mixtures at an OD of 1.11. Our cells were grown for 24 hours in air-lid culture tubes at 30 °C in a shaking incubator (200 rpm). In figure 1 is clearly visible that a violet pigment is produced.

Figure 1
Culture tubes of inoculated Chromobacterium violacein CV026 with different amounts of OHHL. click to enlarge

First the OD of our cultures were measured in a cuvette (1 cm). Then the violacein is isolated from the cells by centrifugation, resuspension in DMSO and a second centrifugation.

Figure 2
Violacein will be removed out of our samples by centrifugation and resuspension in DMSO. Click to enlarge

After isolating violacein from our samples, 200 µL was pipetted into a 96-well falcon microtiter plate and measured at 585 nm. In total, three technical replicates were measured to estimate the pipetting and measuring error (figure 3).

Figure 3
96-well falcon microtiter plate containing the three technical replicates of the dilution series. Click to enlarge

First a broad concentration range was used to estimate the linear part. This range was made by a two-fold dilution series. When measuring the absorbance, LB medium was used as blank. Later the absorbance values of the blank were subtracted from the absorbance values of the standards. Then these values were divided by the absorbance values at 600 nm measured in the microtiterplate which gives an indication of the cell number. Eventually the values were corrected by setting the point with a concentration of 0 mM OHHL in the origin. These values were plotted in figure 4. The concentrations 2.56 mM and 5.12 mM were left out because these values were not distinguishable from the blank. This can be explained because the OHHL is dissolved in DMSO which lowers the growth of C. violaceum CV026. Between the concentrations 0.64 mM and 1.28 mM, the curve is stagnating. This is probably due to saturation of the medium or the inhibitory effect of DMSO. In a next step, a more narrow range was investigated.

Figure 4
First estimation of the OHHL standard curve. click to enlarge

In the second experiment, a range between 0.01 and 0.10 mM was investigated. The difference with the previous experiment is that the OD was first measured in 1 cm cuvettes and that the violacein was afterwards isolated. In this way, the plate reader does not contain cells. This optimisation is done, because we noticed in the previous experiment that violacein was produced more quickly in a culture tube than in a microtiterplate, probably due to the amount of supplied oxygen. Another reason for this working method is because estimating the amount of cells is more standardised by using cuvettes of 1 cm than using a microtiterplate.

Table 1 contains the processed values of the absorbance measurements. The processing is similar to the previous experiment. First the absorbance of DMSO was subtracted from the absorbance of the standards. Thereafter, these values were divided by the OD measured in 1 cm cuvettes. And finally, these values were corrected by putting the standard with a concentration of 0 mM OHHL in the origin.

Here comes table 1

In figure 5, our standard curve is plotted. A linear correlation between the absorbance and the concentration OHHL can be found. The variance of the technical replicates, visualised by the error bars, and the variance of the regression curve, shown by the R^2 value, can be explained by pipetting and measuring errors. Also, working with biological cells generates a background noise. This standard curve could give an estimation of bacterial AHL production. But it is important to keep in mind that there is background noise. Optimisation of this curve can be done by making more biological and technical replicas.

Figure 5
Standard curve ranging from 0 to 0.1 mM. The error bars represent the standard deviation between the technical replicates.

Leucine detection

The standard curve from 0 to 100 µM did not give a linear relationship. Our working method needs optimisation. Because the enzymes are from other organisms than mentioned in Kugimiya and Fukada (2015), it is possible that the enzymes have another efficiency and as a consequence need to have another ratio (substrates over enzyme). Additionally, we did not have the same equipment as described in the article: we had to manually pipet the luminol solution. This possibly means that the measurements have a delay.

Due to a lack of time, we couldn’t complete the plasmid assembly and therefore, we were not able to proceed the quantification of leucine.
In comparison to HPLC, the chosen method would be less time consuming without the need of specialized equipment.



Contact

Address: Celestijnenlaan 200G room 00.08 - 3001 Heverlee
Telephone: +32(0)16 32 73 19
Email: igem@chem.kuleuven.be