Difference between revisions of "Team:Aachen/Lab/Bioreactor/Download Library"

(Hardware Design Files)
(Hardware Design Files)
 
(16 intermediate revisions by 3 users not shown)
Line 2: Line 2:
 
__NOTOC__
 
__NOTOC__
  
Our goal was to finally create a manual for Do-It-Yourself Bioreactor. We have developed some devices and some structures but it can always be upgraded. Well atleast we give everyone the opportunity to try making it on your own. Prerequisite is a Lasercutter and a 3D printer. So get hold of one and use these files.
+
Our goal was to finally create a detailed guide to construct a Do-It-Yourself Bioreactor. We have developed the basic devices and some structures but it can always be upgraded. We would like to give everyone the opportunity to try to customize it as per the needs of their experiments. Some of the prerequisites are a Lasercutter and a 3D printer. So get hold of them and start using these files.
  
 
=Software Packages=
 
=Software Packages=
* [[File:Aachen_MasterControlProgram.zip|Master Control Program (zipped, executables)]]
+
* [https://static.igem.org/mediawiki/2015/3/3f/Aachen_MasterControlProgram.zip Aachen_MasterControlprogram.zip]
* [[File:Aachen_PumpCalibrator.zip|Pump Calibrator (zipped, executables)]]
+
* [https://static.igem.org/mediawiki/2015/1/12/Aachen_PumpCalibrator.zip Aachen_PumpCalibrator.zip]
* [[File:Aachen_ODCalibrator.zip|OD Calibrator (zipped, executables)]]
+
* [https://static.igem.org/mediawiki/2015/b/b5/Aachen_ODCalibrator.zip Aachen_ODCalibrator.zip]
  
The Source code of the whole Master Control Program software suite is available in the [https://github.com/igemsoftware/Aachen_2015 igemsoftware GitHub repository] under the GNU GENERAL PUBLIC LICENSE Version 3.0.
+
The Source code of the whole Master Control Program software suite is available in the [https://github.com/igemsoftware/Aachen_2015 igemsoftware GitHub repository]under the GNU GENERAL PUBLIC LICENSE Version 3.0.
  
 
=Hardware Design Files=
 
=Hardware Design Files=
#Lasercutter : [https://static.igem.org/mediawiki/2015/2/24/Aachen_Lasercutter_files.zip Aachen_Lasercutter_files.zip]
+
#[https://static.igem.org/mediawiki/2015/2/24/Aachen_Lasercutter_files.zip Aachen_Lasercutter_files.zip]
 
#3D printer:
 
#3D printer:
## Pump rotor : [https://static.igem.org/mediawiki/2015/6/63/Aachen_PumpRotors.zip Aachen_PumpRotor.zip]
+
##[https://static.igem.org/mediawiki/2015/6/63/Aachen_PumpRotors.zip Aachen_PumpRotor.zip]
## Stirrer : [https://static.igem.org/mediawiki/2015/8/82/Aachen_Stirrer3D.zip Aachen_Stirrer.zip]
+
##[https://static.igem.org/mediawiki/2015/8/82/Aachen_Stirrer3D.zip Aachen_Stirrer.zip]
## OD Device : [https://static.igem.org/mediawiki/2015/9/91/Aachen_OD_Module.zip Aachen_OD_Module.zip]
+
##[https://static.igem.org/mediawiki/2015/9/91/Aachen_OD_Module.zip Aachen_OD_Module.zip]
 +
#[https://static.igem.org/mediawiki/2015/4/43/Aachen_MainCircuit.zip Aachen_MainCircuit.zip]  
  
  
On the Software Side too we would like to helper recreate our project. These are some programs that helps debug, test and run the bioreactor. The Arduino Firmware is available in two versions: One to enable the slaves to talk to each other (scalable), the other one provides higher possible aeration rates, but no inter slave communication.
+
Further, we also provide software tools to help the end-user in recreating our project. Additional programs are made available to debug, test and run the bioreactor. The Arduino Firmware is available in two versions: one to enable the slaves to talk to each other (scalable) and the other one to provide higher possible aeration rates, but without inter slave communication.
#Arduino firmware:
+
*Arduino firmware:
##Pump debug/test:[https://static.igem.org/mediawiki/2015/7/70/Aachen_PumpProg.zip Aachen_PumpProg.zip]
+
#Pump debug/test:[https://static.igem.org/mediawiki/2015/7/70/Aachen_PumpProg.zip Aachen_PumpProg.zip]
##Stirrer debug/test: [https://static.igem.org/mediawiki/2015/e/e9/Aachen_StirrerDebug.zip Aachen_StirrerDebug.zip]
+
#Stirrer debug/test: [https://static.igem.org/mediawiki/2015/e/e9/Aachen_StirrerDebug.zip Aachen_StirrerDebug.zip]
##Pump Calibrator:[https://static.igem.org/mediawiki/2015/1/12/Aachen_PumpCalibrator.zip Aachen_PumpCalibrator.zip]
+
#Pump Calibrator:[https://static.igem.org/mediawiki/2015/1/12/Aachen_PumpCalibrator.zip Aachen_PumpCalibrator.zip]
##OD debug/test: [https://static.igem.org/mediawiki/2015/8/8c/Aachen_OD_final.zip Aachen_OD_final.zip]
+
#OD debug/test: [https://static.igem.org/mediawiki/2015/8/8c/Aachen_OD_final.zip Aachen_OD_final.zip]
##Final Arduino-Bioreactor Firmware:
+
#Final Arduino-Bioreactor Firmware:
###with inter slave communication: [https://static.igem.org/mediawiki/2015/2/28/Aachen_Slave_Com.zip Aachen_Slave_Com.zip]
+
##with inter slave communication: [https://static.igem.org/mediawiki/2015/2/28/Aachen_Slave_Com.zip Aachen_Slave_Com.zip]
###without inter slave communication: [https://static.igem.org/mediawiki/2015/0/0b/Aachen_Slave_without_Com.zip Aachen_without_Com.zip]
+
##without inter slave communication: [https://static.igem.org/mediawiki/2015/0/0b/Aachen_Slave_without_Com.zip Aachen_without_Com.zip]
  
  

Latest revision as of 01:34, 19 September 2015


Our goal was to finally create a detailed guide to construct a Do-It-Yourself Bioreactor. We have developed the basic devices and some structures but it can always be upgraded. We would like to give everyone the opportunity to try to customize it as per the needs of their experiments. Some of the prerequisites are a Lasercutter and a 3D printer. So get hold of them and start using these files.

Software Packages

The Source code of the whole Master Control Program software suite is available in the igemsoftware GitHub repositoryunder the GNU GENERAL PUBLIC LICENSE Version 3.0.

Hardware Design Files

  1. Aachen_Lasercutter_files.zip
  2. 3D printer:
    1. Aachen_PumpRotor.zip
    2. Aachen_Stirrer.zip
    3. Aachen_OD_Module.zip
  3. Aachen_MainCircuit.zip


Further, we also provide software tools to help the end-user in recreating our project. Additional programs are made available to debug, test and run the bioreactor. The Arduino Firmware is available in two versions: one to enable the slaves to talk to each other (scalable) and the other one to provide higher possible aeration rates, but without inter slave communication.

  • Arduino firmware:
  1. Pump debug/test:Aachen_PumpProg.zip
  2. Stirrer debug/test: Aachen_StirrerDebug.zip
  3. Pump Calibrator:Aachen_PumpCalibrator.zip
  4. OD debug/test: Aachen_OD_final.zip
  5. Final Arduino-Bioreactor Firmware:
    1. with inter slave communication: Aachen_Slave_Com.zip
    2. without inter slave communication: Aachen_without_Com.zip