Difference between revisions of "Team:UFMG Brazil/Protocols"

Protocols

Bacteria mediums

LB (Luria-Bertani) liquid medium – 300 ml
3 g tryptone
1.5 g yeast extract
3 g NaCl
Complete to 300 ml with distilled water
Autoclave in a 500 ml Erlenmeyer
Prepare 2 Erlenmeyers with 300 ml of medium each.

LB (Luria-Bertani) liquid medium – 300 ml
3 g tryptone
1.5 g yeast extract
3 g NaCl
4.5 g Agar (weigh directly into the Erlenmeyer)
Complete to 300 ml with distilled water
Autoclave in a 500 ml Erlenmeyer

SOC medium – 100 ml
2 g tryptone
0.5 g yeast extract
200 µl NaCl 5 M
1 ml MgCl₂ 1 M
250 µl KCl 1 M
10 ml MgSO₄ 1 M
Complete to 100 ml with distilled water
Autoclave and store in bottle with lid

Preparing NaCl 5 M

NaCl MW: 58.44 g/mol

58.44 g ---- 1 mol ---- 1000 ml
x ------------- 50 ml
x = 2.92 g

2.92 g -------- 1 mol
y --------------- 5 mol
y = 14.6 g

Put 14.6 g NaCl into a 50 ml falcon tube and complete to 50 ml with distilled water.

Preparing MgCl₂ 1 M

MgCl₂ MW: 95.211 g/mol

95.21 g ---- 1 mol ---- 1000 ml
x ------------- 50 ml
x = 4.7 g


Put 4.7 g MgCl₂ into a 50 ml falcon tube and complete to 50 ml with distilled water.




Preparing KCl 1 M


KCl MW: 74.5513 g/mol

74.55 g ---- 1 mol ---- 1000 ml
x ------------- 50 ml
x = 3.72 g


Put 3.72 g KCl into a 50 ml falcon tube and complete to 50 ml with distilled water.




Bacteria planting

Materials used


Erlenmeyer flask and sterilized becker
LB Agar
Sterile petri dishes
Antibiotic
Bunsen burner
70% Ethanol
Platinum strap
Clones




Methods


Heat LB Agar in the microwave. Let it cool near the flame.
Pour between 15 ml and 30 ml of LB Agar in an Erlenmeyer. Add the antibiotic in the right proportion and mix.
Pour the medium in the Petri dish and let it solidify near the flame.
Pipet the desired volume of clone on the plate. Spread the bacterial suspension throughout the Petri dish homogeneously.
Cover the plate and incubate it at 37 °C for 12-16 h.




Standard antibiotics concentration used:


Ampicillin - 10 µl/ml
Chloramphenicol -1.2 µl/​​ml




Double digestion

Double Digestion reaction:


Nuclease-free water	4.8 µl
pLPneo miniprep DNA	12 µl
BSA	0.2 µl
Multicore 10x buffer	2 µl
XbaI enzyme	0.5 µl
bamHI enzyme	0.5 µl

Final volume: 20 µl.

Quick spin

Incubation at 37° C for 3 h.

Inactivation at 56° C for 30 min.

Agarose DNA electrophoresis gel

Gel materials – 30 ml gel 1.2%

• 0.36 g agarose
• 30 ml TAE Buffer (tris-acetate-EDTA)
• 1.5 µL Sybr Safe



TAE Buffer materials – 1 L

• 242 g Tris Base
• 57.1 ml Cold Acetic Acid
• 100 mL 0.5 M EDTA
• 1 L distilled water



Sample materials - 12 µl

• 1 kb DNA ladder
• 10 µL DNA samples:
• 8µL nuclease-free water
• 2µL Miniprep DNA
• 2µL loading buffer

Methodology

Prepare the TAE buffer joining the materials in a volumetric flask, beaker or container at the stated order.

Add the agarose and TAE in Erlenmeyer. Mix and heat it carefully in the microwave until homogeneous and without crystals.

Wait the glass cooling until the temperature reaches ~60 °C. Add Syber Safe and pour the solution in the appropriate gel-forming container. Insert the comb to form the wells and wait for gel solidification.

Remove the comb, place the gel on the running cube, and immerse gel in TAE.

In a microtube or paraplast tape, mix the loading buffer with the DNA and carefully apply it to the gel. Apply the 1kb DNA Ladder to gel as well.

Plug the electrodes and run gel for ~40 min.

Glycerol Clone Storage

Materials used:

• 50% Glycerol
• Sterilized tips
• Sterilized microtubes
• Pipettes
• Bacteria in liquid medium containing DNA clone

Methods

Homogenize bacteria medium by inversion.

Near the flame, transfer 170 µl of bacterial culture to a sterile microtube.

Add 30 µl of 50% glycerol and homogenize.

Place the glycerol clones in a -20° C freezer for ~20 h and then transfer them to a - 80° C freezer.

Ligation

We used the IFN-β DNA amplified by PCR for ligation with pGEM-T Easy Vector. For that, Promega’s pGEM-T Vector System I was used

Reaction - total 10 µl

2x Rapid Ligation Buffer, T4 DNA Ligase	5 µl
pGEM-T Easy vector (50 ng)	1 µl
IFN-β PCR product from tube 1	3 µl
T4 DNA Ligase (3 Weiss units/µl)	1 µl




Incubation for 1 h at room temperature. After, the ligation was incubated at 4° C, overnight.

Pre-inocolum and inocolum

Materials used:

Sterilized tips

Materials used:

• Pipettes
• Antibiotic
• Petri dishes containing isolated bacterial colonies
• LB Liquid medium
• Bunsen burner

Methodology

Materials used:

• Add 4 ml of LB liquid medium to each test-tube and the correspondent antibiotic ratio
• With toothpick or sterilized tip, remove an isolated colony
• Place the toothpick / tip inside the test-tube, without touching it sides
• Leave the tubes overnight at 37° C for 16 h in the shaker
• After incubation, remove the tubes from the shaker. Medium must be turbid, indicating bacterial growth
• Pour the contents of the test-tubes on a larger recipient and complete volume to 20 ml with liquid LB medium
• Repeat the incubation as above and remove the inserted plasmid through miniprep or maxiprep



TOP10 E. coli bacteria chemo competent transformation

2 µl of pUCIDT gene 1-LAP-IFN-β plasmid in 100 µl of TOP10 bacteria
30 min ice incubation
90 s incubation in 42° C water bath;




2 min ice incubation;
Carefully add 0.9 ml of SOC medium;
1 h incubation in 37° C and 120 rpm of rotation;




2 bacterial plating of 100 µl of transformation (37° C, 16 h)
Each plate was made with 30 ml of LB Agar and 30 µl of ampicillin 100 mg/ml