Part Documentation

Biobrick

SgRNA targeting LacI promoter - BBa_K1645998

This construct contains a small guide RNA (sgRNA) used in the CRISPR-cas9 system, targeting the LacI promoter ( BBa_R0010). The parts include the 20 nucleotide long target sequence that is complementary to the region within the LacI ( BBa_R0010) promoter, the scaffold region responsible for the secondary structure of the sgRNA and the terminator. In order to express the sgRNA and for it to be transcribed, a constitutive promoter should be cloned upstream of the sgRNA. The suggested constitutive promoter for this part is the U6 promoter. You can refer to the Waterloo iGEM 2015 wiki to see the full sequence of the U6 promoter in order to clone it in.

This part was cloned without the promoter to avoid a biobrick illegal site existing on the U6 promoter. In order to construct this part we designed primers containing the standard iGEM prefix and suffix and used PCR to amplify the RFP-sgRNA out from a linear construct we synthesized using Integrated DNA Technologies (IDT). We then digested the amplified RFP-sgRNA containing the prefix and suffix using XbaI and PstI followed by a column purification. Similarly pSB1C3 was digested using XbaI and PstI, and the backbone was isolated through gel extraction. The column purified RFP-SgRNA and gel extracted PSB1C3 backbone were then ligated to create the final construct.

Our experiment was conducted in BL21. The characterization data using this part from our experiments demonstrates that when using this SgRNA, RFP, which uses the LacI promoter is being suppressed. We were able to detect drop in RFP levels using this SgRNA coupled with S.pyrogenes dCas9. This suggests that our CRISPR cas9 system works.

Dual Colour Plasmid (RFP and GFP) in pSB1C3 - BBa_K1645999

This part is the composite part of GFP full cassette taken from registry part BBa_I20260 and RFP full cassette taken from registry part BBa_J04450. The GFP is under the J23101 promoter, which is a constitutive promoter. In addition, the RFP is under the lacI ( R0010) promoter which is constitutive in DH5-alpha due to the absence of lacI expression. If lacI repressor is presented in the cell the RFP expression is inhibited and IPTG is needed for the expression of RFP. For our purposes, this part was used to see the colour swaps using different SgRNA targeting promoter region of each of the colours.

In order to construct this part we took Dual Colour Target, a previously constructed dual colour plasmid containing both RFP and GFP and swapped out the backbone. The backbone swap was conducted by first digesting the two fluorescent proteins in Dual Colour Target out of the pSB3K3 backbone using XbaI and PstI followed by a gel extraction. The standard biobrick backbone pSB1C3 was also digested out using XbaI and PstI and similarly isolated via gel extraction. The gel extracted GFP and RFP cassette was then ligated with the gel extracted pSB1C3 backbone completing the part construction.

In order to characterize the Dual Colour Plasmid in psb1C3 we used Imaging Flow Cytometry to see the expression of both Red fluorescent and Green fluorescent proteins. The constructed part was then transformed in DH5-alpha and the colonies were inoculated and grown in LB overnight. The resulting culture was fixed and diluted 10 times in 10% formalin buffer and then placed in the Imaging Flow Cytometry machine where it was excited by a laser set at 488 nm for optimum range reading. In order to control for signal leakage between channels a compensation was created using both BBa_I20260 and BBa_J04450 as single colour controls. The results from the Imaging Flow Cytometry readings show that the Dual Colour Plasmid, BBa_K1645999 expresses both RFP and GFP in DH5-alpha. This part was successfully cloned and sequence confirmed.

Other Parts

Dual Colour Target in pSB3K3

This plasmid was constructed for the purpose of the sgRNA swap experiment component of our project. The backbone for this plasmid is pSB3K3 with p15A origin. The pSB3K3 backbone was chosen instead of the classic pSB1C3 backbone in order to avoid plasmid incompatibility during the part of our experiment where we co-transformed this plasmid with dCas9. We used iGEM registry parts, BBa_I20260 and BBa_J04450 and classical restriction cloning to construct this part. The part BBa_J04450 was cut with XbaI and PstI and was cloned into BBa_I20260 between SpeI and PstI and M scar was generated between the two parts once XbaI and SpeI came together. The promoter regions of each of the fluorescent proteins was designed to be targeted by CRISPR cas9 system. This part was cloned successfully and the sequence was confirmed.

SgRNA-Mod-RFP

This part contains the modified sgRNA containing SphI and BamHI restriction site for the purpose of easier exchange of sgRNA. The SphI site is between the promoter and the target sequence and the BamHI is between the target and the sgRNA scaffold region. There is a single base pair change on the scaffold. The sgRNA is under U6 promoter. The modified sgRNA was synthesized by Integrated DNA. Polymerase chain reaction (PCR) was used to amplify the sgRNA using primers flanked by standard biobrick prefix and suffix. Then the amplified part was cloned into Dual Colour Target between SpeI and PstI sites. This part successfully cloned and sequence confirmed.

SgRNA-Ctrl-RFP

This part contains the sgRNA targeting the lacI promoter upstream of the Red Fluorescent protein along with the RFP and GFP full cassette. This was used in our project as a control to check for the proper dCas9 functionality, then was compared to the SgRNA-Mod_RFP part. This sgRNA was synthesized by Integrated DNA Technology and primers were designed to amplify the sgRNA part flanking with prefix and suffix. Then the amplified part was digested and got cloned into the Dual Colour Target between SpeI and PstI. This part was successfully cloned and sequenced.

SgRNA-Ctrl-GFP

This part contains the sgRNA cassette that targets the promoter and ribosome binding site upstream of the GFP from the Dual Colour Target. The sgRNA was synthesized by Integrated DNA Technologies (IDT) and was amplified using primers that contained flanking standard biobrick prefix and suffix. Then the part was cloned between SpeI and PstI at the Dual Colour Target plasmid. This part was cloned and sequence confirmed.

Modified dCas9

The purpose of this part is to have a mutated version of S. pyogenes dCas9 that can function with NGAG pam site. Three mutations were introduced to the dCas9 we obtained from addgene. O’Connell 2014 .The three single base pair mutations were made in the dCas9 using two different primers using Quick Change protocol. One primer contains two mutations, changing arginine to glutamine at site 1335 and changing threonine to arginine at site 1337. A separate primer was used to induce a single mutation in order to change aspartic acid to the glutamic acid at site 1135. The Quick Change protocol was used to make these three mutations. Firstly Quick change was performed to induce two mutations and after the positive sequencing results came back, second round of mutagenesis was performed to put in place the third mutation.

sgRNA-NGAG

The sgRNA cassette was synthesized by Integrated DNA Technologies (IDT). This cassette includes U6 promoter, target section which recognises the NGAG pam site at targets the J23101 promoter upstream of the GFP coding sequence. The part was amplified using primers flanking with standard biobrick prefix and suffix and then restriction digest was used to clone the sgRNA cassette into BBa_I20260 in pSB3k3 within SpeI and PstI sites.

pCAMBIA+SgRNA-A1

The sgRNA-A1 incl

SgRNA-GFP-Control Biobrick

The purpose of this part is to guide the dcas9 protein to the J23101 promoter and B0032 ribosome binding site to block RNA polymerase and prevent transcription of the gene downstream from these two parts. Our targeted gene is BBa_I20260.

This biobrick contains small guide RNA (SgRNA) part to be used along with the CRISPR-Cas9 system. Once this part is placed in front of an appropriate promoter, it guides the cas9 or dcas9 protein toward a desired target. This part contains the Target sequence, SgRNA scaffold, and transcriptional terminator part BBa-B0010. The Target sequence is 20 nucleotides long and has been designed using the Benchling CRISPR tool. The PAM sequence is agg, and the “on target score” calculated by Benchling is 47.6. This sequence is located in between the J23101 promoter and B0032 ribosome binding site. In our situation, J23101 and B0032 are upstream of E0040 green fluorescent protein (GFP). More specifically, the target sequence is complementary to the last five base pairs of the promoter and the first six nucleotides of the ribosome binding site. This SgRNA part, along with the U6 promoter, was synthesized by Integrated DNA Technologies (IDT). The synthesized part contains the U6 promoter upstream of the GFP SgRNA. This promoter was originally in place in our synthesized part and for use in our project. However, for the purpose of biobricking, primers were designed to exclude the U6 promoter to avoid an illegal EcoRI site within that promoter. The target sequence, sgRNA scaffold, and the terminator were amplified with primers 138 and 140 from the appendix. The forward primer contains the standard biobrick prefix and the reverse primer contains the suffix. Then the amplified DNA was cut using a restriction digest with XbaI and PstI, and was cloned into pSB1C3.

Characterized Parts

The xylose inducible promoter is one of the parts our team characterized this year. The reason we want to characterize this promoter is because it has been mutated via site directed mutagenesis in order to remove illegal sites. Now that the promoter has been mutated, it must be tested to see if it is expressed efficiently in the presence of xylose. The parts we are characterizing are BBa_K1323014 and BBa_K1323002.

To characterize this variant of the xylose inducible promoter, it was cloned in front of GFP so a simple fluorescence assay could be performed. The new mutated xylose promoter should be activated in the presence of media containing 2% xylose, assuming its function is no different than the original . The positive control was a plasmid containing the constitutive J23101 promoter in front of GFP. The negative control in this assay was using a plasmid including GFP with no promoter. All plasmids were transformed into the DH5alpha Escherichia coli strain.

Strains with the plasmids were grown to an OD600=0.2 and then were diluted into media and put into a plate reader. Measurements of OD600 and GFP expression were taken at intervals of 10 minutes until the positive control expressed the GFP promoter.

The OD600 graph shows that all of the strains grew in the 96-well plate. The GFP fluorescence intensity graph shows that the J23101 promoter effectively expressed the GFP protein while the strain with no promoter did not have GFP expression. When the xylose inducible promoter was in just LB media, it did not express GFP. When xylose was added, the promoter also did not express GFP. This means that the mutation made to remove the illegal site also affected the promoter. The mutated promoter does not work, even when it is induced with 2% xylose.

References

• Part Collection
• Basic Parts
• Composite Parts

       <groupparts>iGEM015_Waterloo</groupparts>