Difference between revisions of "Team:Bordeaux/Description"

Revision as of 08:52, 16 September 2015

IGEM Bordeaux 2015

Our Solution: Curdlan

What is Curdlan?

To start with, let's talk about glucans. Glucan molecules are polysaccharides of D-glucose monomers linked by glycosidic bonds. One of them is called Curdlan , a (1→3)-β-D-glucan. This molecule is a linear homopolymer which may have as many as 12,000 glucose units. It is naturally produced by Agrobacterium sp. ATCC31749 which uses it as an Extracellular PolySaccharides (EPS) in it's capsule [1]. The capsule formation is correlated with cell aggregation (floc formation) and it is suggested that the capsule and floc formation together function as protective structures in cases of Nitrogen-starvation of the post-stationary phase. The protective effects for the bacteria are due to the fact that Curdlan forms a capsule that completely surrounds the outer cell surface of bacteria.

« Ok and how will Curdlan be useful to you? »

« Let me explain our purpose. »

Curdlan belongs to the class of biological response modifiers that enhance or restore normal immune defenses. For example, it can have antitumor, anti-infective, anti-inflammatory, and anticoagulant activities (see other properties of Curdlan). In particular, this β1,3 glucan can stimulate plants' immune system.

Figure 1: Representation of the Curdlan molecule showing the beta 1,3 links between the glucose units

More precisely, applied to grapevine plants, sulfated ß-glucans induce the accumulation of phytoalexins (organic antimicrobial substances) and the expression of a set of Pathogenesis-Related proteins . In plants, the fact that oligosaccharides must carry crucial sulfates for their biological function suggests that chemical sulfation of oligosaccharides can improve their biological properties. In recents studies, compared to Laminarin (ß-glucan), its sulfated derivative triggered an enhanced immunity against P. viticola in V. vinifera and a stronger immunity against TMV in Nicotiana tabacum. The results indicate that the chemical modification of an elicitor, such as sulfated derivative of ß-glucans, could improve its resistance-inducer efficiency. Moreover, if a ß-glucan is a substrate for plant ß-1,3 glucanase, its sulfation clearly protects the molecule from its enzymatic degradation. Thus, a basal activity of plant glucanases can degrade ß-glucans and consequently releases short inactive ß-glucans; whereas sulfated derivatives still remain active molecules during a longer period. This might explain the higher resistance induced by ß-glucan sulfates compared to ß-glucans.

Furthermore, non-sulfated Curdlan doesn't trigger the through a mutant gene: pmr4. This mutant is resistant to mildew infections but is unable to induce Pathogenesis-Related proteins expression . Also, activation of a Pathogenesis-Related protein called PR1 in grapevine is regulated by the salicylic acid signaling pathway . The lack of PR1 expression in non-sulfated Curdlan-treated grapevine could be explained by a negative feedback of glucan. This is demonstrated by the study of a double mutant of pmr4 which restore the susceptibility to mildew. It suggests that linear β-1,3 glucan negatively regulates the salicylic acid pathway. So, sulfation of the glucan would counteract the negative feedback effect. [16]

To conclude, activation of the innate immune system before the invasion of pathogens is a way to improve the resistance of plant against infection and to reduce the use of chemicals products.

« Ok I understand the value of producing Curdlan. How will you proceed? »

« That is a good question, let me tell you how we approached the subject! »

In Agrobacterium , three genes (crdA, crdS and crdC) are required for Curdlan production. The putative operon crdASC contains crdS, encoding β-(1,3)-glucan synthase catalytic subunit, flanked by two additional genes : crdA and crdC. The first assists translocation of the nascent polymer across the cytoplasmic membrane and the second assists the passage of the nascent polymer across the periplasm. Finally we would like to sulfate our Curdlan molecules chemically in order to enhance it's effects on the activation of the plant's imune system since it has been shown that sulfated curdlan is much more effective (see previous page [3]). However, all Curdlan biosynthesis is dependent of nitrogen starvation and various parameters. We want to simplify all of this.

Figure 2: Schematic representation of the β 1,3 glucan synthetic pathway [2]

Before starting the project, we took a few weeks to decide which host organism we would use and how they could be useful. To begin with we looked at three different organisms: Escherichia coli , Bacillus subtilis and Saccharomyces cerevisiae and compared their β glucan metabolic pathways. We rapidly eliminated Bacillus subtilis from our possible hosts due to it's lack of enzymes involved in the metabolic pathway of β 1,3 glucans (Figure 5). However, we found that Saccharomyces cerevisiae naturally produces Curdlan in it's cell wall, like Agrobacterium. Furthermore, Escherichia coli is only missing one enzyme (the β Glucan synthase) to synthethize Curdlan. We therefore concluded that we could keep these two organisms: one where we would overexpress the β 1,3 glucan synthase using a constititive promoter and one where we would insert the ability to create curdlan by adding the enzyme that is needed throught the crdASC putative operon.

Literature Cited:

[1] M. McIntosh (2005) Curdlan and other bacterial (1→3)-β-D-glucans mini review. Appl Microbiol Biotechnol 68: 163–173

[2] M. McIntosh (2012) Recent advances in curdlan biosynthesis, biotechnological production, and applications. Appl Microbiol Biotechnol 93:525–531

[3] Adrien Gauthier (2014)The Sulfated Laminarin Triggers a Stress Transcriptome before Priming the SA- and ROS-Dependent Defenses during Grapevine’s Induced Resistance against Plasmopara viticola. Plos one 93:525–531

To sum it up, we would like to produce Curdlan in Escherichia coli or Saccharomyces cerevisiae and then sulfate it before spraying it on grapevine leaves as a preventive treatment against Downy mildew infections. That way vineyards can continue to produce good wine and make everyone happy.

Using Bacteria:
Escherichia coli

Firstly, we decided to produce curdlan with Escherichia coli , because Agrobacterium and it are Gram negative bacteria and have a lot of membrane similarity. Moreover Escherichia coli is a simple bacteria that can be grown and cultured easily and inexpensively in a laboratory unlike Agrobacterium .

Since E. coli naturally produces UDP Glucose (metabolite number 3 on Figure 5), adding the β 1,3 glucan synthase would theoretically allow curdlan production. We therefore inserted the three genes which code for the β glucan synthase and metabolic transporters in Agrobacterium (crdASC) into E. coli . However, since our gene sequences for crdA, crdS, and crdC originally come from Agrobacterium we decided to optimize our gene codons for E. coli with IDT's codon optimization tool in order to make sure that our gene would correctly be expressed. Furthermore we decided to place the genes under an easier control than N-starvation by using a promoter which is activated in stationary phase. (osmY, BBa_J45992 characterized by MIT in 2006). This should theoretically allow maximum production in simple conditions.

All three genes were synthesized by IDT separately with the correct ends to allow integration in the iGEM plasmids and an easy creation of our biobricks. We planned on amplifying our fragments by PCR and creating different biobricks with different assemblies of our genes and plasmids in order to find the effect of each gene on Curdlan production and to verify the effectiveness of our promoter.

In order to have control over the different culture perameters we also decided to use M63 culture medium. This is the medium which is used for curdlan production in Agrobacterium and is also interesting since it is a minimal medium which allows us to easily vary parameters and optimize production. Furthermore, since Curdlan is a glucose derivative, being able to control the amount of sugar in the medium is interesting for production optimization. We plan on testing the effect of the following parameters on Curdlan production:

❃ Different mediums (minimal and complete)

❃ Different stationary phase temperature: by reducing the temperature we might be able to reduce growth and obtain more Curdlan

❃ Glucose shot during stationary phase at different times

❃ Lowering pH in stationary phase to reduce cell division

Using Yeast:
Saccharomyces cerevisiae

Yeast cell walls are naturally made up of various layers which are represented in the following diagram. First there is a layer of chitin, then a layer of beta glucans and finally a mixed layer of proteins and mannan. Commonly, the yeast cell wall is made of 5-10% of beta 1,6 glucans and 50-55% of beta 1,3 glucans and beta 1,6 glucans.

Figure 3: Schematic representation of the yeast's cell wall

Since the layer of mannan and proteins as well as chitin is insoluble in alkali solutions, beta glucans are easily separated from the rest of the yeast cell wall. Therefore, the only alkali soluble components are a mix of beta 1,6 and beta 1,3 glucans. (aimanianda et al 2009) In order to separate the two we plan on using beta 1,6 glucanases in order to obtain a solution of beta 1,3 glucans and therefore our curdlan molecule.

We therefore decided to over-express the curdlan metabolic pathway by inserting into yeast (INVSC1 strain ) an inducible promoter (gal1) for the glucan synthase gene (Fks1) hoping that this would allow the cell to produce curdlan in greater quantities. This would allow us to compare our curdlan production in E. coli to the natural production in an organism and the enhanced production through the addition of a promoter.

To do this , we will extract the FKS1 gene from yeast DNA by amplifying the genomic DNA it by PCR. We will then insert FKS1 in one hand, into plasmid pYES2 with the Gal1 inductif promoter to then integrate the modified plasmid in Saccharomyces cerevisiae and boost the production of curdlan. This strategy did not work. We then tried to put a inductive promoter ahead of the relevant gene by homologous recombinaison. We put GAL promoter and a selective gene HIS3 ( to select our succeeded transformant) in front of FKS1. Gal promtoer and HIS3 was extract by PCR from pFA 6a-HIS3MX6-pGAL-3HA . On the other hand, we will integrate the FKS1 gene into the iGEM plasmid pSB1C3 to get our famous BioBrick that we'll send to Boston. This genetic construction with HIST3 gene and GAL promoter was inserted in pSB1C3 by gibson assembly. However, site-directed mutagenesis may be necessary when integrating the gene into the plasmid because there are restriction sites (EcoR1) that are unwanted within the HIS3 gene.

SCHEMA We compared the production of curdlan from a non recombined yeast cultur and succesfull recombined yeast.

« It's very clear now. It looks like a cool project. But, i have a last question: why did you choose this subject? »

« Because, as we explained on the problem page, Downy Mildew is a real problem for the Aquitaine region. This is why we wanted to find an ecological solution to this problem. And also, we are SWAG (Secretly We Adore Glucans) »

Other useful properties of Curdlan

Curdlan, the linear (1→3)-β-glucan from Agrobacterium, has unique rheo-logical and thermal gelling properties. It is neutral and insoluble in water and if it is heated in an aqueous suspension, it adopts simple helical conformations (55-80°C) or a triple helical connected conformation (80-130°C). [1] It then acts as a gelling agent and form two types of gels (low-set gel or high-set gel which have been documented by Zhang et al [3]). Apart from being tasteless, colourless and odourless, its advantages are that, in contrast to cold-set gels (e.g. gelatin, gellan, carrageenan) and heat-set gels (e.g. konjac glucomannan, methylcellulose), the heating process alone produces different forms of curdlan gels with different textural qualities, physical stabilities and water-holding capacities. Curdlan gels are widely used in the food industry as a food additive ( E424 ) and to develop new food products (e.g. freezable tofu noodles) and calorie-reduced food, since there are no digestive enzymes for curdlan in the upper alimentary tract, and curdlan can be used as a fat substitute [4]. The safety of curdlan has been assessed in animal studies and in vitro tests [4,5] and it is approved for food use in Korea, Taiwan and Japan as an inert dietary fibre. It is registered in the United States as a food additive [7]

Figure 7: Curdlan properties and applications www.link.springer.com

Curdlan has also found applications in non-food sectors. Its water-holding capacity is applied in the formulation of “superworkable” concrete, where its enhanced fluidity prevents cement and small stones from segregating [8]. It has also been proposed as an organic binding agent for ceramics [9]. In addition, curdlan gels have medical and pharmacological potential, for example in drug delivery through sustained and diffusion-controlled release of the active ingredient. [10]

Furthermore, curdlan derivatives are members of a class of compounds known as biological response modifiers that enhance or restore normal immune defences. Useful properties include antitumor, anti-infective, anti-inflammatory, and anticoagulant activities [11] Hydrolysed curdlans with a degree of polymerisation <50 are not effective anti-tumour agents but the carboxymethyl ether and the sulphate and phosphate esters of curdlan, show an enhanced biological activity [12]. Furthermore, curdlan sulphate has anti-HIV activity [13] and inhibitory effects on the development of malarial parasites in vitro [14]. All the other curdlan clinical applications in cancer, diabetes, hypertension, hypertriglyceridemia etc. are listed here. Curdlan also has potential for exploitation as a new biomaterial based on the self-assembling ability of (1→3)-β-glucan-megalosaccharides (DP 30–45) to form single, hexagonal, lamellar nanocrystalline structures (∼8–9 nm thick) containing water of crystallization after heating to 90°C [15]. Manipulation of the conditions for self-assembly may allow the engineering of new materials.

However, more research is needed for the further development of these useful properties, in particular by reducing the cost of production. This may involve the use of cheaper C sources, optimisation of fermentation conditions, development of higher curdlan-yielding strains, or manipulation of curdlan synthesis and/or regulatory genes. [1]

Literature Cited:

[1] M. McIntosh (2005) Curdlan and other bacterial (1→3)-β-D-glucans mini review. Appl Microbiol Biotechnol 68: 163–173

[2] R. Zhang and K. J. Edgar (2014) Properties, Chemistry, and Applications of the Bioactive Polysaccharide Curdlan. American Chemical Society

[3] Zhang HB, Nishinari K, Williams MAK, Foster TJ, Norton IT (2002) A molecular description of the gelation mechanism of curdlan. Int J Biol Macromol 30:7–16

[4] Nishinari K, Zhang H (2000) Curdlan. In: Phillips GO, Williams PA (eds) Handbook of hydrocolloids. CRC, Boca Raton, pp 269–286

[5] Spicer EJF, Goldenthal EI, Ikeda T (1999) A toxicological assessment of curdlan. Food Chem Toxicol 37:455–479

[6] (2000) WHO food additives series. In: WHO (ed) 53rd Meeting of the joint FAO/WHO expert committee on food additives. JEFCA/WHO, Geneva

[7] 21 CFR 172. Food additives permitted for direct addition to food for human consumption: curdlan. Federal Register 61:65941

[8] (1996) Bioproducts: bio-concrete. BioIndustry 13:56–57

[9] Harada T (1992) The story of research into curdlan and the bacteria producing it. Trends Glycosci Glycotechnol 4:309–317

[10] Kanke M, Tanabe E,(1995) Application of curdlan to controlled drug delivery. III. Drug release from sustained release suppositories in vitro. BiolPharm Bull 18:1154–1158

[11] Janeway CA, Medzhitov R (2002) Innate immune recognition. Annu Rev Immunol 20:197–216

[12] Toida T, Chaidedgumjorn A, Linhardt RJ (2003) Structure and bio- activity of sulphated polysaccharides. Trends Glycosci Glycotechnol 15:29–46

[13] Jagodzinski PP, Wiaderkiewicz R (1994) Mechanism of the inhibitory effect of curdlan sulphate on HIV-1 infection in vitro. Virology 202:735–745

[14] Evans SG, Morrison D, Kaneko Y, Havlik I (1998) The effect of curdlan sulphate on development in vitro of Plasmodium falciparum. Trans R Soc Trop Med Hyg 92:87–89

[15]Chanzy H, Vuong R (1985) Ultrastructure and morphology of crystalline polysaccharides. In Atkins EDT (ed) Polysaccharides: topics in structure and morphology. Macmillan, London, pp 41–71

[16]Menard R, Alban S, (2004) β-1,3 Glucan Sulfate, but Not β-1,3 Glucan, Induces the Salicylic Acid Signaling Pathway in Tobacco and Arabidopsis

@@ Line 144: / Line 144: @@
                  <p align="justify" style="text-indent: 3vw;"> To do this , we will extract the FKS1 gene from yeast DNA by amplifying the genomic DNA it by PCR. We will then insert FKS1 in one hand, into plasmid pYES2 with the Gal1 inductif promoter to then integrate the modified plasmid in <i>Saccharomyces cerevisiae </i> and boost the production of curdlan. This strategy did not work. We then tried to put a inductive promoter ahead of the relevant gene by homologous recombinaison. We put GAL promoter and a selective gene HIS3 ( to select our succeeded transformant) in front of FKS1.  Gal promtoer and HIS3 was extract by PCR from pFA 6a-HIS3MX6-pGAL-3HA .
-On the other hand, we will integrate the FKS1 gene into the iGEM plasmid pSB1C3 to get our famous BioBrick that we'll send to Boston. This genetic construction with HIST3 gene  and GAL promoter was inserted in pSB1C3 by gibson assembly. However, site-directed mutagenesis may be necessary when integrating the gene into the plasmid because there are restriction sites ( EcoR1) that are unwanted within the HIS3 gene. </p>
+On the other hand, we will integrate the FKS1 gene into the iGEM plasmid pSB1C3 to get our famous BioBrick that we'll send to Boston. This genetic construction with HIST3 gene  and GAL promoter was inserted in pSB1C3 by gibson assembly. However, site-directed mutagenesis may be necessary when integrating the gene into the plasmid because there are restriction sites (EcoR1) that are unwanted within the HIS3 gene. </p>
                  <p align="justify" style="text-indent: 3vw;"> SCHEMA We compared the production of curdlan from a non recombined yeast cultur and succesfull recombined yeast. </p>