Difference between revisions of "Team:Warwick/Modelling3"

Line 55: Line 55:
  
 
We thought of printing cells into the desired shape using fused deposition modelling (adding layers of cells to create a structure). Once it has been printed the cells would then secrete a plastic which would form the shape. This would have the advantage over normal FDM printers which produce anisotropic materials with an underlying weakness in the z-axis, between the layers of plastic which is the biggest limitation of the technology. This weakness is caused by a lack of adhesion between already partially solidified plastic layers, this stops structurally strong items being made. Our proposed method would eliminate the directionality of strength and would create a structure of uniform strength and flexibility.<br>
 
We thought of printing cells into the desired shape using fused deposition modelling (adding layers of cells to create a structure). Once it has been printed the cells would then secrete a plastic which would form the shape. This would have the advantage over normal FDM printers which produce anisotropic materials with an underlying weakness in the z-axis, between the layers of plastic which is the biggest limitation of the technology. This weakness is caused by a lack of adhesion between already partially solidified plastic layers, this stops structurally strong items being made. Our proposed method would eliminate the directionality of strength and would create a structure of uniform strength and flexibility.<br>
However the size of an E.coli cell is larger than the diameter of the smallest plastic filament possible, so the resulting structure may be less detailed, however if we developed a cell with a small enough radius this problem will be subverted.
+
However the size of an <i>E.coli</i> cell is larger than the diameter of the smallest plastic filament possible, so the resulting structure may be less detailed, however if we developed a cell with a small enough radius this problem will be subverted.
  
 
<br>The image to the left shows how FDM works in regards to plastic.
 
<br>The image to the left shows how FDM works in regards to plastic.
Line 69: Line 69:
 
<p style="float: left;"><img src="https://static.igem.org/mediawiki/2015/5/59/Warwicksteroelithography.png" height="300px" width="300px" border="1px"></p>
 
<p style="float: left;"><img src="https://static.igem.org/mediawiki/2015/5/59/Warwicksteroelithography.png" height="300px" width="300px" border="1px"></p>
 
Another method of 3D printing is stereo-lithography, which works by creating a vat of plastic, in this case cells which then has two lasers, above and below which move and cause the plastic to harden (or cells to react and secrete plastic). The benefit of this is that you can create far more complex and detailed shapes.  Shapes could possibly be made with precision at a cellular level, this sort of accuracy would be of paramount importance for the creation of heart valves and even a bone structure with the correct fibre arrangement. <br>
 
Another method of 3D printing is stereo-lithography, which works by creating a vat of plastic, in this case cells which then has two lasers, above and below which move and cause the plastic to harden (or cells to react and secrete plastic). The benefit of this is that you can create far more complex and detailed shapes.  Shapes could possibly be made with precision at a cellular level, this sort of accuracy would be of paramount importance for the creation of heart valves and even a bone structure with the correct fibre arrangement. <br>
However it would require larger amount of E.coli cells to be held together without dying, a very large challenge to overcome. For this we would use E.coli which would secrete plastic once it is subjected to a certain wavelength of light which would be provided by the two lasers. <br>
+
However it would require larger amount of <i>E.coli</i> cells to be held together without dying, a very large challenge to overcome. For this we would use <i>E.coli</i> which would secrete plastic once it is subjected to a certain wavelength of light which would be provided by the two lasers. <br>
  
We also though of using a process similar to selective laser sintering, where a film of E.coli cells are spread onto a surface then a laser ‘draws’ the first layer. A second layer of cells is spread on top and the process is repeated. This process takes longer but could be used to make much larger structures.  
+
We also though of using a process similar to selective laser sintering, where a film of <i>E.coli</i> cells are spread onto a surface then a laser ‘draws’ the first layer. A second layer of cells is spread on top and the process is repeated. This process takes longer but could be used to make much larger structures.  
  
 
<img src="https://static.igem.org/mediawiki/2015/9/96/WarwickSelective_laser_melting_system_schematic.jpg" class="pics" alt="">  
 
<img src="https://static.igem.org/mediawiki/2015/9/96/WarwickSelective_laser_melting_system_schematic.jpg" class="pics" alt="">  

Revision as of 15:03, 17 September 2015

Warwick iGEM 2015