Quick facts:
Length: 513 bp
Weight: 20kDa
Diameter of the beta barrel: 2 nm
Usage and biology
OmpX, or Outer Membrane Protein X, belongs to a family of highly conserved bacterial proteins that promote bacterial adhesion to and entry into mammalian cells. It presents both C- and N-termini in the intracellular domain (see Figure 1). OmpX consists of an eight-stranded antiparallel all-next-neighbor β barrel. The core of the protein consists of an extended hydrogen-bonding network of highly conserved residues (see Figure 1)
[1].
Figure 1: A) The OmpX protein structure has been elucidated through NMR and X-ray crystallography. B) The square residues are important for the secondary structure of OmpX. To keep the structure intact, we introduce an amber stop codon in one of the protruding loops. Figure 1B has been adapted from [1].
Gene Design
OmpX was identified and characterized by Mecsas et al and is 513 bp long. It contains a putative signal sequence, which makes sure that OmpX will be in the membrane
[2]. To be able to use OmpX as a scaffold, you need to integrate the unnatural amino acid. To do so, some modifications must be made to this part. Within the original OmpX part, a codon was mutated into the amber stop codon TAG. This codon will be incorporated in the protruding loops of OmpX, loop 2 and loop 3 (see Figure X). These loops were chosen because they are easily accessible and are not part of the beta-barrel of OmpX
[3]. We believe that mutations in these loops will not disturb the secondary structure of OmpX. With a specific tRNA it is possible to implement a unnatural amino acid at the place of the TAG codon. For more information on which specific mutations we made, see our Project Design page.
To be able to use OmpX in a sensor system, we attached several intracellular domains, namely NanoLuc, mNeonGreen, mTurquoise, LargeBiT and SmallBiT. These domains can interact with each other in different ways. NanoLuc and mNeonGreen form a BRET pair, mTurquoise and mNeonGreen a FRET pair and LargeBiT and SmallBiT a luciferase. These constructs were attached to OmpX with a linker and were inserted in a pETDuet-1 vector that has 2 multiple cloning sites (MCS-1 and MCS-2).
Sequence
The sequence of our OmpX part has been verified by sequencing at StarSeq.
5'-ATG AAA AAA ATT GCA TGT CTT TCA GCA CTG GCC GCA GTT CTG GCT TTC ACC GCA GGT ACT TCC GTA GCT GCG ACT TCT ACT GTA ACT GGC GGT TAC GCA CAG AGC GAC GCT CAG GGC CAA ATG AAC AAA ATG GGC GGT TTC AAC CTG AAA TAC CGC TAT GAA GAA GAC AAC AGC CCG CTG GGT GTG ATC GGT TCT TTC ACT TAC ACC GAG AAA AGC CGT ACT GCA AGC TCT GGT GAC TAC AAC AAA AAC CAG TAC TAC GGC ATC ACT GCT GGT CCG GCT TAC CGC ATT AAC GAC TGG GCA AGC ATC TAC GGT GTA GTG GGT GTG GGT TAT GGT AAA TTC CAG ACC ACT GAA TAC CCG ACC TAC AAA CAC GAC ACC AGC GAC TAC GGT TTC TCC TAC GGT GCG GGT TTG CAA TTC AAC CCG ATG GAA AAC GTT GCT CTG GAC TTC TCT TAC GAG CAG AGC CGT ATT CGT AGC GTT GAC GTA GGC ACC TGG ATT GCC GGT GTT GGT TAC CGC TTC -3'
This BioBrick Part looks like Figure 2. It contains the prefix and suffix with the correct restriction sites (EcoRI, XbaI, SpeI and PstI). OmpX itself is 513 bp long.
Characterization
When mutated with the amber stop codon TAG, a unnatural amino acid with an azide-functionalized group can be expressed. After the expression of this amino acid, OmpX can covalently bind almost anything, as long as it contains a DBCO-functionalized group. The binding finds place by using a bio-orthogonal “click” reaction (SPAAC click chemistry).
Figure 2: SnapGene figure of the OmpX Part.
To test the functionality of this “click” reaction, some experiments were done by clicking DBCO-PEG4-TAMRA at the surface.
For all the experiments we used the following vectors: pETDuet-1 with one or two construct(s) inserted (OmpX + intracellular protein) and pEVOL-pAzF (tRNA + tRNA synthetase). Both vectors were transformed into BL21(DE3). The expression was introduced by adding arabinose, IPTG and the unnatural amino acid.
DBCO-PEG4-TAMRA Confirmation
To confirm whether OmpX is in the membrane and whether or not the unnatural amino acid is being incorporated into OmpX, DBCO-PEG4-TAMRA was used. TAMRA is a fluorescent dye that can be used to verify the “click” reaction. If the unnatural amino acid is present, DBCO-PEG4-TAMRA should “click” to the transmembrane protein OmpX and stay there. This can be analyzed with FACS. For more information about how to perform FACS experiments, see our
Protocol Page.
To verify that OmpX is in the membrane, we used the OmpX – NanoLuc and OmpX – mNeonGreen constructs. These gave the following results after clicking with DBCO-PEG4-TAMRA (see Figure 3 and 4). From this it can be concluded that OmpX is in the membrane and that the “click” reaction works.
Figure 3: FACS results of OmpX – NanoLuc.
Figure 4: FACS results of OmpX – mNeonGreen.
[1] J. Vogt and G. E. Schulz, “The structure of the outer membrane protein OmpX from Escherichia coli reveals possible mechanisms of virulence.,” Structure, vol. 7, no. 10, pp. 1301–9, Oct. 1999.
[2] J. Mescas, R. Welch, J.W. Erickson and C.A. Gross, “Identification and characterization of an Outer Membrane Protein, OmpX, in Escherichia coli that is homologous to a family of outer membrane proteins including ail of Yersinia enterocolitica.,” Journal of Bacteriology, vol. 177, no. 3, pp. 799-804, Nov. 1994.
[3] J. J. Rice, A. Schohn, P. H. Bessette, K. T. Boulware, and P. S. Daugherty, “Bacterial display using circularly permuted outer membrane protein OmpX yields high affinity peptide ligands.,” Protein Sci., vol. 15, no. 4, pp. 825–36, Apr. 2006.
Outer Membrane Protein X (OmpX) with BamHI linker and mNeonGreen
- BBa_K1761001
Quick facts:
Total length: 1439 bp
BamHI-linker length: 213 bp
mNeongreen length: 711 bp
Weight: 53kDa
Usage and biology
OmpX, or Outer Membrane Protein X, belongs to a family of highly conserved bacterial proteins that promote bacterial adhesion to and entry into mammalian cells. It presents both C- and N-termini in the intracellular domain (see Figure 5). OmpX consists of an eight-stranded antiparallel all-next-neighbor β barrel. The core of the protein consists of an extended hydrogen-bonding network of highly conserved residues (see Figure 5)
[4].
Figure 5: A) The OmpX protein structure has been elucidated through NMR and X-ray crystallography. B) The square residues are important for the secondary structure of OmpX. To keep the structure intact, we introduce an amber stop codon in one of the protruding loops. Figure 5B is adapted from [4].
mNeonGreen is a yellow-green fluorescent protein and is derived from a tetrameric fluorescent protein from cephalochordate Branchiostoma lanceolatum. mNeonGreen is the brightest monomeric green of yellow fluorescent protein yet described and is an excellent fluorescence resonance energy transfer (FRET) acceptor for the newest cyan fluorescent proteins
[5].
Gene Design
This construct consists of three parts, namely OmpX, a BamHI-linker, and mNeonGreen. OmpX is already described as a single part, and that same part, with the amber stop codon TAG incorporated for the integration of the unnatural amino acid, is used for this construct. For more information, see our
Part OmpX.
mNeonGreen is connected to OmpX with a BamHI-linker. This linker is a 213 bp long flexible GGSGGS linker and by using the restriction enzyme BamHI, the linker can become 45 bp shorter.
mNeonGreen was characterized by Shaner et al
[5]. The BamHI-linker is inspired by the article of T.H. Evers et al
[6].
Figure 6: Schematical overview of the OmpX – mNeonGreen Part.
These three parts together give a construct with OmpX as transmembrane protein
and mNeonGreen as intracellular domain
(see Figure 6)
For all our experiments we used pETDuet-1 as a vector. This vector has two multiple cloning sites, namely MCS-1 and MCS-2. To be able to use this part as a sensor, we inserted both OmpX – NanoLuc and OmpX – mNeonGreen into this vector, both in different multiple cloning sites. Both multiple cloning sites were expressed. In this way, NanoLuc and mNeonGreen can function as a BRET pair (see Figure 7).
Figure 7: Schematical overview of the BRET pair.
Sequence
The sequence of our OmpX - mNeonGreen part has been verified by sequencing at StarSeq.
5'- ATG AAA AAA ATT GCA TGT CTT TCA GCA CTG GCC GCA GTT CTT GCT TTC ACC GCA GGT ACT TCC GTA GCA GCG ACT TCT ACT GTA ACT GGC GGT TAC GCA CAG AGC GAC GCT CAG GGC CAA ATG AAC AAA ATG GGC GGT TTC AAC CTG AAA TAC CGC TAT GAA GAA GAC AAC AGC CCG CTG GGT GTG ATC GGT TCT TTC ACT TAC ACC GAG AAA AGC CGT ACT GCA AGC TCT GGT GAC TAC AAC AAA AAC CAG TAC TAC GGC ATC ACT GCT GGT CCG GCT TAC CGC ATT AAC GAC TGG GCA AGC ATC TAC GGT GTA GTG GGT GTG GGT TAT GGT AAA TTC CAG ACC ACT GAA TAC CCG ACC TAC AAA CAC GAC ACC AGC GAC TAC GGT TTC TCC TAC GGT GCG GGT TTG CAA TTC AAC CCG ATG GAA AAC GTT GCT CTG GAC TTC TCT TAT GAG CAG AGC CGT ATT CGT AGC GTT GAC GTA GGT ACG TGG ATT GCT GGT GTT GGT TAT CGC TTC ACT CTC GGC ATG GAT GAG CTG TAC AAA AGC GGC ATt CGT GGG GGC TCT GGA GGC TCA GGC GGA TCC GGT GGT AGT GGA GGT TCG GGC GGT AGC GGT GGC TCT GGC GGA TCC GGT GGA TCT GGG GGG TCA GGC GGC TCT GGC GGA AGT GGC GGC AGC GGC GGC AGT GGC GGC AGC GGG GGA TCA GGT GGA AGC GGT GGC TCC ACC ATG GTG AGC ATG GTG AGC AAG GGC GAG GAG GAT AAC ATG GCC TCT CTC CCA GCG ACA CAT GAG TTA CAC ATC TTT GGC TCC ATC AAC GGT GTG GAC TTT GAC ATG GTG GGT CAG GGC ACC GGC AAT CCA AAT GAT GGT TAT GAG GAG TTA AAC CTG AAG TCC ACC AAG GGT GAC CTC CAG TTC TCC CCC TGG ATT CTG GTC CCT CAT ATC GGG TAT GGC TTC CAT CAG TAC CTG CCC TAC CCT GAC GGG ATG TCG CCT TTC CAG GCC GCG ATG GTA GAT GGC TCC GGA TAC CAA GTC CAT CGC ACA ATG CAG TTT GAA GAT GGT GCC TCC CTT ACT GTT AAC TAC CGC TAC ACC TAC GAG GGA AGC CAC ATC AAA GGA GAG GCC CAG GTG AAG GGG ACT GGT TTC CCT GCT GAC GGT CCT GTG ATG ACC AAC TCG CTG ACC GCT GCG GAC TGG TGC AGG TCG AAG AAG ACT TAC CCC AAC GAC AAA ACC ATC ATC AGT ACC TTT AAG TGG AGT TAC ACC ACT GGA AAT GGC AAG CGC TAC CGG AGC ACT GCG CGG ACC ACC TAC ACC TTT GCC AAG CCA ATG GCG GCT AAC TAT CTG AAG AAC CAG CCG ATG TAC GTG TTC CGT AAG ACG GAG CTC AAG CAC TCC AAG ACC GAG CTC AAC TTC AAG GAG TGG CAA AAG GCG TTT ACC GAT GTT ATG GGC ATG GAC GAG TTG TAC AAG TAA AA -3'
This BioBrick Part looks like Figure 8. It contains the prefix and suffix with the correct restriction sites (EcoRI, XbaI, SpeI and PstI). OmpX is 513 bp long, the BamHI-Linker is 213 bp long and mNeonGreen 711 bp.
Characterization
When mutated with the amber stop codon TAG, OmpX can covalently bind anything by using a bio-orthogonal “click” reaction. The presence of mNeonGreen in this construct is tested with a fluorescence assay.
Figure 8: SnapGene figure of the OmpX – mNeonGreen Part.
For all the experiments we used the following vectors: pETDuet-1 with a construct inserted (OmpX + intracellular protein) and pEVOL-pAzF (tRNA + tRNA synthetase). Both vectors were transformed into BL21(DE3). The expression was introduced by adding arabinose, IPTG and the unnatural amino acid.
DBCO-PEG4-TAMRA Confirmation
To confirm whether OmpX is in the membrane and whether or not the unnatural amino acid is being incorporated into OmpX, DBCO-PEG4-TAMRA was used. TAMRA is a fluorescent dye that can be used to verify the “click” reaction.
If the unnatural amino acid is present, DBCO-PEG4-TAMRA should “click” to the transmembrane protein OmpX and stay there. This can be analyzed with FACS. For more information about how to perform FACS experiments, see our
Protocol Page.
Figure 9: FACS results of OmpX – mNeonGreen.
OmpX – mNeonGreen gave the following results after clicking with DBCO-PEG4-TAMRA (see Figure 9). From this it can be concluded that OmpX is in the membrane and that the “click” reaction works.
[4] J. Vogt and G. E. Schulz, “The structure of the outer membrane protein OmpX from Escherichia coli reveals possible mechanisms of virulence.,” Structure, vol. 7, no. 10, pp. 1301–9, Oct. 1999.
[5] J. Mescas, R. Welch, J.W. Erickson and C.A. Gross, “Identification and characterization of an Outer Membrane Protein, OmpX, in Escherichia coli that is homologous to a family of outer membrane proteins including ail of Yersinia enterocolitica.,” Journal of Bacteriology, vol. 177, no. 3, pp. 799-804, Nov. 1994.
[6] J. J. Rice, A. Schohn, P. H. Bessette, K. T. Boulware, and P. S. Daugherty, “Bacterial display using circularly permuted outer membrane protein OmpX yields high affinity peptide ligands.,” Protein Sci., vol. 15, no. 4, pp. 825–36, Apr. 2006.
Outer Membrane Protein OmpX with BsoBI linker and NanoLuc
- BBa_K1761002
Quick facts:
Total length: 1241 bp
BsoBI-linker length: 213 bp
NanoLuc length: 513 bp
Weight: 46 kDa
Usage and biology
OmpX, or Outer Membrane Protein X, belongs to a family of highly conserved bacterial proteins that promote bacterial adhesion to and entry into mammalian cells. It presents both C- and N-termini in the intracellular domain (see Figure 1). OmpX consists of an eight-stranded antiparallel all-next-neighbor β barrel. The core of the protein consists of an extended hydrogen-bonding network of highly conserved residues (see Figure 10)
[7].
Figure 10: A) The OmpX protein structure has been elucidated through NMR and X-ray crystallography, B) The square residues are important for the secondary structure of OmpX. To keep the structure intact, we introduce an amber stop codon in one of the protruding loops. Figure 10B is adapted from [7].
NanoLuc is a small sized and bright luciferase protein engineered for optimal performance as a bioluminescent reporter. The small size and bright luminescence bring exquisite sensitivity to reporter assays and other bioluminescence applications. The luciferase naturally occurs in the organism Oplophorus gracilirostis.
Gene Design
This construct consists of three parts, namely OmpX, a BsoBI-linker, and NanoLuc. OmpX is already described as a single part, and that same part, with the amber stop codon TAG incorporated for the integration of the unnatural amino acid, is used for this construct. For more information, see our
Part OmpX.
Between OmpX and mNeonGreen we inserted a BsoBI-linker. This is a 213 bp long flexible GGSGGS-linker with two BsoBI-restriction sites. These sites give the possibility to shorten the linker with 45 bp. The BsoBI-linker is inspired by the article "Quantitative Understanding of the Energy Transfer between Fluorescent Proteins Connected via Flexible Peptide Liners" by T.H. Evers et al from 29 August 2006
[8].
These three parts together give a construct with OmpX as transmembrane protein
and NanoLuc as intracellular domain
(see Figure 11).
Figure 11: Schematical overview of the OmpX – NanoLuc Part.
For all our experiments we used pETDuet-1 as a vector. This vector has two multiple cloning sites, namely MCS-1 and MCS-2. To be able to use this part as a sensor, we inserted both OmpX – NanoLuc and OmpX – mNeonGreen into this vector, both in different multiple cloning sites. Both multiple cloning sites were expressed. In this way, NanoLuc and mNeonGreen can function as a BRET pair (see Figure 12).
Figure 12: Schematical overview of the BRET pair.
Sequence
The sequence of our OmpX - NanoLuc part has been verified by sequencing at StarSeq.
5'- ATG AAA AAA ATT GCA TGT CTT TCA GCA CTG GCC GCA GTT CTT GCT TTC ACC GCA GGT ACT TCC GTA GCA GC GAC TTC TAC TGT AAC TGG CGG TTA CGC ACA GAG CGA CGC TCA GGG CCA AAT GAA CAA AAT GGG CGG TTT CAA CCT GAA ATA CCG CTA TGA AGA AGA CAA CAG CCC GCT GGG TGT GAT CGG TTC TTT CAC TTA CAC CGA GAA AAG CCG TAC TGC AAG CTC TGG TGA CTA CAA CAA AAA CCA GTA CTA CGG CAT CAC TGC TGG TCC GGC TTA CCG CAT TAA CGA CTG GGC AAG CAT CTA CGG TGT AGT GGG TGT GGG TTA TGG TAA ATT CCA GAC CAC TGA ATA CCC GAC CTA CAA ACA CGA CAC CAG CGA CTA CGG TTT CTC CTA CGG TGC GGG TTT GCA ATT CAA CCC GAT GGA AAA CGT TGC TCT GGA CTT CTC TTA TGA GCA GAG CCG TAT TCG TAG CGT TGA CGT AGG TAC GTG GAT TGC TGG TGT TGG TTA TCG CTT CAC TCT CGG CAT GGA TGA GCT GTA CAA AAG CGG CAT tCG TGG CGG CTC GGG TGG AAG CGG TGG GAG TGG TGG AAG CGG TGG GAG TGG CGG CTC GGG TGG GTC GGG CGG ATC GGG GGG TTC TGG TGG CAG TGG CGG CTC AGG CGG CTC CGG TGG ATC AGG TGG TTC GGG TGG TTC TGG GGG AAG CGG CGG GTC AGG TGG CTC TAC TAT GGT TAG CGT ATT TAC TCT TGA AGA TTT TGT CGG TGA TTG GCG CCA GAC CGC CGG CTA TAA CCT GGA CCA AGT GCT TGA ACA GGG CGG GGT TAG CAG CCT GTT TCA AAA CCT GGG GGT GAG TGT CAC GCC AAT TCA GCG CAT CGT TCT GTC GGG AGA GAA TGG TCT GAA AAT CGA TAT CCA CGT CAT TAT CCC GTA CGA AGG TCT TTC TGG TGA TCA GAT GGG GCA GAT AGA AAA AAT ATT CAA AGT GGT GTA CCC AGT AGA CGA TCA TCA CTT CAA GGT TAT ACT GCA CTA TGG CAC CCT CGT TAT CGA TGG CGT TAC TCC GAA TAT GAT CGA TTA CTT TGG GCG TCC TTA TGA AGG TAT TGC GGT GTT CGA CGG TAA AAA AAT TAC GGT TAC CGG GAC GCT CTG GAA TGG TAA TAA AAT CAT TGA TGA GCG CTT GAT AAA CCC AGA TGG CAG CCT TCT GTT CAG AGT TAC GAT AAA CGG GGT TAC GGG TTG GCG ACT GTG CGA AAG AAT ATT AGC TTA AAA -3'
This BioBrick Part looks like Figure 13. It contains the prefix and suffix with the correct restriction sites (EcoRI, XbaI, SpeI and PstI). OmpX is 513 bp long, the BsoBI-Linker is 213 bp long and NanoLuc 513 bp.
Characterization
When mutated with the amber stop codon TAG, OmpX can covalently bind anything by using a bio-orthogonal “click” reaction. The presence of NanoLuc in this construct can be tested by adding furimazine and read out its emission spectrum. If it is present, there should be a maximum around 460 nm.
Figure 13: SnapGene overview of the OmpX – NanoLuc Part.
For all the experiments we used the following vectors: pETDuet-1 with a construct inserted (OmpX + intracellular protein) and pEVOL-pAzF (tRNA + tRNA synthetase). Both vectors were transformed into BL21(DE3). The expression was introduced by adding arabinose, IPTG and the unnatural amino acid.
DBCO-PEG4-TAMRA Confirmation
To confirm whether OmpX is in the membrane and whether or not the unnatural amino acid is being incorporated into OmpX, DBCO-PEG4-TAMRA was used. TAMRA is a fluorescent dye that can be used to verify the “click” reaction.
OmpX – NanoLuc gave the following results after clicking with DBCO-PEG4-TAMRA (see Figure 14). From this it can be concluded that OmpX is in the membrane and that the “click” reaction works.
If the unnatural amino acid is present, DBCO-PEG4-TAMRA should “click” to the transmembrane protein OmpX and stay there. This can be analyzed with FACS. For more information about how to perform FACS experiments, see our
Protocol Page.
Figure 14: FACS results of OmpX – NanoLuc.
Bioluminiscence Confirmation
For more information about how to perform a bioluminescence measurement, see our
Protocol Page.
[7] J. Vogt and G. E. Schulz, “The structure of the outer membrane protein OmpX from Escherichia coli reveals possible mechanisms of virulence.,” Structure, vol. 7, no. 10, pp. 1301–9, Oct. 1999.
[8] T.H. Evers et al, “Quantitative Understanding of the Energy Transfer between Fluorescent Proteins Connected via Flexible Peptide Linkers.,” Biochemistry, vol. 45, no. 44, pp. 13183-92, Nov. 2006.
mNeongreen
- BBa_K1761003
mTurquoise2
- BBa_K1761004
<groupparts>iGEM015 TU_Eindhoven</groupparts>