Difference between revisions of "Team:Sherbrooke/Description"

m
 
(15 intermediate revisions by 3 users not shown)
Line 3: Line 3:
  
 
<html>
 
<html>
−
<body>
+
<body>
  
−
<h2> Project Description </h2>
+
<h2 align="center">Re-inventing the lab: Development of a highly flexible, affordable and open source robotic automation platform</h2>
 +
<br>
 +
<p>
 +
Almost everyone working or studying in biology have heard about liquid handlers and robots dedicated to biological sciences. Despite the fact that many know about them, and could potentially use them in their lab, very few scientists actually use automation.
 +
</p>
 +
 +
<p>
 +
One of the main difficulties is getting access to one of these robots. They are expensive and only highly funded laboratories can afford them.  However, even if students or scientists have access to an automation platform, they often barely use it. 1) The consumables used by these robots are expensive and can cost up to 10 times more than the usual consumables found in a laboratory, which is simply too pricey for most research groups to afford for day to day operations. 2) Robots are generally built for specific protocols with high-throughput applications in mind, and lack the flexibility required to easily expand their application range. 3) Many lower throughput but still time-consuming and repetitive experiments cannot be performed by current robots because specific modules that support their automation are not available or too costly.  4) Third party modules are generally not compatible between manufacturers because of proprietary hardware and software. 5) Other problems like complicated not sufficiently flexible software tools (with costly updates) or the need to have dedicated personnel trained to run the robots discourage many potential users.
 +
</p>
 +
 +
<p>
 +
Our team has developed an affordable, modular and open source robotic automation platform to address these problems. Our platform and accessory modules are built from affordable off-the-shelf or 3D-printed parts, bringing the acquisition cost to a point where most laboratories can afford it. Our software has an easy to use, yet powerful, graphical interface that uses a well-designed and flexible database to store protocols along with labware and modules’ specifications.
 +
</p>
 +
 +
<p>
 +
In addition to our basic platform, many modules were created:<br>
 +
<ul>
 +
<li>Single channel pipette using a special tip holder that can accommodate any standard tips (2 µl, 200 µl and 1000 µl);</li>
 +
<li>Multi-channel pipette (8 channels) with tip holder compatible with any standard tips (2 µl, 200 µl and 1000 µl);</li>
 +
<li>Gripper for tubes, plates and tip boxes;</li>
 +
<li>Centrifuge for 1.5 ml and 5 ml tubes;</li>
 +
<li>A magneto- caloric module for 1.5 ml tube (heat or cool 1.5 ml tube, and apply magnetic field for protocols using magnetic beads);</li>
 +
<li>A magneto-caloric module for 96-well plate tube (heat or cool 96-well plate, and apply magnetic field for protocols using magnetic beads);</li>
 +
<li>Turbido Agitator Caloric module (heat or cool a 2.5 cm glass tube, mix the liquid using a magnetic stir bar, and measure optical density in real-time even in the presence of ambient light).</li>
 +
</ul>
 +
</p>
 +
 +
<p>
 +
As the hardware and the software are open source, creating or interfacing new modules that works with the platform can be easily done!
 +
</p>
 +
 +
<p>
 +
Using our modules and software, the BIOBOT platform will allow the automation of many synthetic biology applications. For example, a recombineering experiment could be performed in a totally automated fashion by including the following steps: cell culture, optical density measurement, cell wash and preparation by centrifugation, electroporation, recovery of transformed cells, and plating. To do so, a “scarless” genome editing deletion system is being constructed using an inducible toxin and a double selectable marker (amilCP and KanR). Those markers will make the cells blue and resistant to kanamycin, a feature that could serve the robot to eventually be able to see which colonies are most likely to be good. A second recombineering step could remove this cassette without any residual “scar” sequence through a counterselection using the inducible toxin. The details about these parts and the related experiments are shown in Biologic Parts section.
 +
</p>
  
−
<p class="normal">A lot of technology fields are growing at an incredibly fast pace. Just think of electrification of transport with Tesla’S Model S,
+
<div class="imageContainer">
−
further and further space travel such as ESA Rosetta space mission, or simply your newly released cell phones. However, when you take a
+
<img width="50%" src="https://static.igem.org/mediawiki/2015/8/84/Team_Sherbrooke_3D_Whole_Platform.png" /><br/>
−
look at laboratory manipulation, especially biology’s one, you realize that some fields are left behind. Some people even say that laboratory
+
<p>Robotic Platform Main Assembly</p>
−
manipulation are 30 years behind in development compared to a lot of other field. In an era where everything is automated with robot almost as
+
</div>
−
soon it is feasible, biology lab researchers are still working heart and soul, day and night, to perform their repetitive lab manipulations.
+
−
This is exactly where we came in (or more precisely when Professor Sebastien Rodrigue came to us).</p>
+
  
−
<br />
+
<br />
  
−
<p class="normal">We will help him to bring lab manipulation to its rightful level and to do so, we are designing and building an automated robotic platform
+
<h2>Also in "Project"</h2>
−
with compatible auxiliary modules. This platform includes a Cartesian robot, a tool holding support, a pipetting module and a gripper. Auxiliary
+
<ul>
−
modules include an ingenious mix of magnetism control, temperature control and instrumentation. All of these parts and modules are explained
+
<a href="https://2015.igem.org/Team:Sherbrooke/Experiments"><li>Experiments & Protocols</li></a>
−
in details in our Wiki’s Design page.</p>
+
<a href="https://2015.igem.org/Team:Sherbrooke/Results"><li>Results</li></a>
 +
<a href="https://2015.igem.org/Team:Sherbrooke/Design"><li>Design</li></a>
 +
</ul>
 +
<hr>
  
−
<br />
+
 
−
</body>
+
 
 +
</body>
 +
    </div></div> <!--Closing tag for div id="mainContainer" and div id="contentContainer". Opening tag are in the template-->
 
</html>
 
</html>

Latest revision as of 18:54, 3 October 2015

Re-inventing the lab: Development of a highly flexible, affordable and open source robotic automation platform


Almost everyone working or studying in biology have heard about liquid handlers and robots dedicated to biological sciences. Despite the fact that many know about them, and could potentially use them in their lab, very few scientists actually use automation.

One of the main difficulties is getting access to one of these robots. They are expensive and only highly funded laboratories can afford them. However, even if students or scientists have access to an automation platform, they often barely use it. 1) The consumables used by these robots are expensive and can cost up to 10 times more than the usual consumables found in a laboratory, which is simply too pricey for most research groups to afford for day to day operations. 2) Robots are generally built for specific protocols with high-throughput applications in mind, and lack the flexibility required to easily expand their application range. 3) Many lower throughput but still time-consuming and repetitive experiments cannot be performed by current robots because specific modules that support their automation are not available or too costly. 4) Third party modules are generally not compatible between manufacturers because of proprietary hardware and software. 5) Other problems like complicated not sufficiently flexible software tools (with costly updates) or the need to have dedicated personnel trained to run the robots discourage many potential users.

Our team has developed an affordable, modular and open source robotic automation platform to address these problems. Our platform and accessory modules are built from affordable off-the-shelf or 3D-printed parts, bringing the acquisition cost to a point where most laboratories can afford it. Our software has an easy to use, yet powerful, graphical interface that uses a well-designed and flexible database to store protocols along with labware and modules’ specifications.

In addition to our basic platform, many modules were created:

  • Single channel pipette using a special tip holder that can accommodate any standard tips (2 µl, 200 µl and 1000 µl);
  • Multi-channel pipette (8 channels) with tip holder compatible with any standard tips (2 µl, 200 µl and 1000 µl);
  • Gripper for tubes, plates and tip boxes;
  • Centrifuge for 1.5 ml and 5 ml tubes;
  • A magneto- caloric module for 1.5 ml tube (heat or cool 1.5 ml tube, and apply magnetic field for protocols using magnetic beads);
  • A magneto-caloric module for 96-well plate tube (heat or cool 96-well plate, and apply magnetic field for protocols using magnetic beads);
  • Turbido Agitator Caloric module (heat or cool a 2.5 cm glass tube, mix the liquid using a magnetic stir bar, and measure optical density in real-time even in the presence of ambient light).

As the hardware and the software are open source, creating or interfacing new modules that works with the platform can be easily done!

Using our modules and software, the BIOBOT platform will allow the automation of many synthetic biology applications. For example, a recombineering experiment could be performed in a totally automated fashion by including the following steps: cell culture, optical density measurement, cell wash and preparation by centrifugation, electroporation, recovery of transformed cells, and plating. To do so, a “scarless” genome editing deletion system is being constructed using an inducible toxin and a double selectable marker (amilCP and KanR). Those markers will make the cells blue and resistant to kanamycin, a feature that could serve the robot to eventually be able to see which colonies are most likely to be good. A second recombineering step could remove this cassette without any residual “scar” sequence through a counterselection using the inducible toxin. The details about these parts and the related experiments are shown in Biologic Parts section.


Robotic Platform Main Assembly


Also in "Project"