Difference between revisions of "Team:Macquarie Australia/Experiments"

Line 24: Line 24:
 
<br>
 
<br>
 
<center><img src="https://static.igem.org/mediawiki/2015/3/39/NDprotocolflow.jpeg"></center>
 
<center><img src="https://static.igem.org/mediawiki/2015/3/39/NDprotocolflow.jpeg"></center>
<figcaption><center><i><b>Figure 1.</b> An overview of the methodology. </i> A modified BioBrick Standard Assembly was used. Alkaline phosphatase (referenced below) on the target vector backbone for the genes; ChlM and those from Photosystem II. The Gibson Assembly method was used in order to insert composite part ChlH into the BioBrick vector plasmid (referenced below).</figcaption></center></br>
+
<figcaption><center><i>Fig 1. An overview of the methodology. A modified BioBrick Standard Assembly was used. Alkaline phosphatase on the target vector backbone for the genes; ChlM and those from Photosystem II. The Gibson Assembly method was used in order to insert composite part ChlH into the BioBrick vector plasmid.</i></figcaption></center></br>
  
<h2>Experiments and Protocol</h2>
+
    <h1 style="text-align: center;">Experiments and Protocol</h1>
<h5>MAKING COMPETENT CELLS</h5>
+
    <h4 style="text-align: center;">Making Competent Cells</h4>
 
<ol>
 
<ol>
 
<li>Using a sterile plastic loop, pick 10-12 large (2-3mm in diameter) colonies from the plate. Inoculate to 150mL of SOB medium in a 1L flask, and grow overnight at 18-22oC, 200-250rpm.</li>
 
<li>Using a sterile plastic loop, pick 10-12 large (2-3mm in diameter) colonies from the plate. Inoculate to 150mL of SOB medium in a 1L flask, and grow overnight at 18-22oC, 200-250rpm.</li>
Line 49: Line 49:
 
<h6>SOB Media (for competent cells)</h6>
 
<h6>SOB Media (for competent cells)</h6>
 
<b>Ingredients:</b> 10g bacto-tryptone, 2.5g bacto-yeast, 1000µl NaCl, 417µL KCl, 1.205g Mg2SO4 & 500mL Milli-Q water. <br>
 
<b>Ingredients:</b> 10g bacto-tryptone, 2.5g bacto-yeast, 1000µl NaCl, 417µL KCl, 1.205g Mg2SO4 & 500mL Milli-Q water. <br>
<b>Methods:</b> The adjusted quantities were combined in a 1 L measuring column with constant stirring and then placed in the autoclave for sterilisation (121oC, 15 min, standard liquid cycle).<br></br>
+
<b>Methods:</b> The adjusted quantities were combined in a 1 L measuring column with constant stirring and then placed in the autoclave for sterilisation (121oC, 15 min, standard liquid cycle).<br><br>
  
<h5>AGAROSE GEL ELECTROPHORESIS </h5>
+
    <h4 style="text-align: center;"> Agarose Gel Electrophoresis</h4>
 
<ol>
 
<ol>
 
<li>Mix 1ul of 1kbp DNA ladder with 6ul of loading dye (bromophenol blue) and 4ul of 1x TAE buffer and load into first well </li>
 
<li>Mix 1ul of 1kbp DNA ladder with 6ul of loading dye (bromophenol blue) and 4ul of 1x TAE buffer and load into first well </li>
Line 68: Line 68:
 
<b>Methods:</b> Dissolve agarose in TAE by microwaving for 1 minute, wait till cool to touch, then add 2ul of GelRed and pour into the casette.
 
<b>Methods:</b> Dissolve agarose in TAE by microwaving for 1 minute, wait till cool to touch, then add 2ul of GelRed and pour into the casette.
 
<br></br>
 
<br></br>
<h5>COMPOSITE PART LIGATION</h5>
+
 
 +
    <h4 style="text-align: center;">Composite Part Ligation</h4>
 
<p>The assembly of composite parts from two existing BioBricks i.e. BioBrick plasmid A (parent vector) and BioBrick plasmid B (gene to be inserted) was performed through a restriction digest/ligation protocol. </p>
 
<p>The assembly of composite parts from two existing BioBricks i.e. BioBrick plasmid A (parent vector) and BioBrick plasmid B (gene to be inserted) was performed through a restriction digest/ligation protocol. </p>
 
<ol>
 
<ol>
Line 77: Line 78:
 
<br></br>
 
<br></br>
  
<h5>PLASMID PREP</h5>
+
    <h4 style="text-align: center;">Plasmid Prep</h4>
 
<ol>
 
<ol>
 
<li>Centrifuge @13,200 rpm for 10 min of 1.8mL of overnight cultures in 2mL Eppendorf’s </li>
 
<li>Centrifuge @13,200 rpm for 10 min of 1.8mL of overnight cultures in 2mL Eppendorf’s </li>
Line 96: Line 97:
 
</ol><br></br>
 
</ol><br></br>
  
<h5>GENERAL PCR RECIPE</h5>
+
    <h4 style="text-align: center;">General PCR Recipe</h4>
 
<ul>
 
<ul>
 
<li>4 µL of 5x phusion buffer. </li>
 
<li>4 µL of 5x phusion buffer. </li>
Line 110: Line 111:
 
<li>1 µL of template. </li>
 
<li>1 µL of template. </li>
 
<li>Total volume = 20 µL </li>
 
<li>Total volume = 20 µL </li>
</ul>
+
</ul><br><br><br>
<h5>PCR settings: A general program for PCR is as follows:</h5>
+
 
 +
    <h4 style="text-align: center;">PCR settings: A general program for PCR is as follows:</h4>
 
<ul>
 
<ul>
 
<li>Initial denaturation at 98oC for 30seconds.</li>
 
<li>Initial denaturation at 98oC for 30seconds.</li>
Line 123: Line 125:
 
</ul><br></br>
 
</ul><br></br>
  
<h5>TRANSFORMATION BY HEAT SHOCK</h5>
+
    <h4 style="text-align: center;">Transformation By Heat Shock</h4>
 
<ol>
 
<ol>
 
<li>Obtain competent cells from -80oC. </li>
 
<li>Obtain competent cells from -80oC. </li>
Line 141: Line 143:
 
<b>Ingredients:</b> 10g bacto-tryptone, 2.5g bacto-yeast, 1000µl 5M NaCl, 417µL 3M KCl, 1.205g 20mM Mg2SO4, 805g 20mM D-glucose & 500mL Milli-Q water. <br>
 
<b>Ingredients:</b> 10g bacto-tryptone, 2.5g bacto-yeast, 1000µl 5M NaCl, 417µL 3M KCl, 1.205g 20mM Mg2SO4, 805g 20mM D-glucose & 500mL Milli-Q water. <br>
 
<b>Methods:</b> The adjusted quantities were combined in a 1 L measuring column with constant stirring and then placed in the autoclave for sterilisation (121oC, 15 min, standard liquid cycle).<br></br>
 
<b>Methods:</b> The adjusted quantities were combined in a 1 L measuring column with constant stirring and then placed in the autoclave for sterilisation (121oC, 15 min, standard liquid cycle).<br></br>
<h5>PROTEIN EXPRESSION</h5>
+
 
 +
    <h4 style="text-align: center;">Protein Expression</h4>
 
<ol>
 
<ol>
 
<li>Re-transform restriction-digest screened plasmids according to the heat shock transformation protocol. </li>
 
<li>Re-transform restriction-digest screened plasmids according to the heat shock transformation protocol. </li>
Line 183: Line 186:
 
<br></br>
 
<br></br>
  
<h5>MgPE ENZYMATIC FUNCTIONAL ASSAY</h5>
+
    <h4 style="text-align: center;">MgPE Enzymatic Functional Assay</h4>
 
<ol>
 
<ol>
 
<li>Collect whole lysate, from induced operon 3 containing ChlM expressed proteins, using ChlM pET <sup> 2 </sup> as a negative control.  </li>  
 
<li>Collect whole lysate, from induced operon 3 containing ChlM expressed proteins, using ChlM pET <sup> 2 </sup> as a negative control.  </li>  
Line 191: Line 194:
 
<li>The sample was spun down, to separate the protein and supernatant.
 
<li>The sample was spun down, to separate the protein and supernatant.
 
<li>Supernatant was then subjected to UHPLC to and observed peaks.  </li>
 
<li>Supernatant was then subjected to UHPLC to and observed peaks.  </li>
</ol><br></br>
+
</ol><br><br>
  
 
   
 
   
<h5>UHPLC </h5>
+
    <h4 style="text-align: center;">UHPLC </h4>
 
<p>The UHPLC was performed according to Sawicki and Willows <sup> 3 </sup>. Briefly, a Shimadzu HPLC system was used at 2ml/min with an Alltech C8 column. A 5 min linear gradient was used for separation of Mg-protoporphyrin IX and Magnesium-protoporphyrin IX mono-methyl ester. Compounds were detected at an excitation wavelength of excitation of 416nm and emission of 595nm.  </p>
 
<p>The UHPLC was performed according to Sawicki and Willows <sup> 3 </sup>. Briefly, a Shimadzu HPLC system was used at 2ml/min with an Alltech C8 column. A 5 min linear gradient was used for separation of Mg-protoporphyrin IX and Magnesium-protoporphyrin IX mono-methyl ester. Compounds were detected at an excitation wavelength of excitation of 416nm and emission of 595nm.  </p>
 
<br></br>  
 
<br></br>  
  
<h5>SDS-PAGE ELECTROPHORESIS</h5>
+
    <h4 style="text-align: center;">SDS-PAGE Electrophoresis</h4>
 
<ol>
 
<ol>
 
<li>Re-suspend pelleted bacterial cells in 200µL of Milli-Q-water </li>
 
<li>Re-suspend pelleted bacterial cells in 200µL of Milli-Q-water </li>
Line 207: Line 210:
 
<li>Conduct electrophoresis at a constant voltage (200V) for 1 hour. </li>
 
<li>Conduct electrophoresis at a constant voltage (200V) for 1 hour. </li>
 
<li>Coommassie Stain for ~30 minutes. </li>
 
<li>Coommassie Stain for ~30 minutes. </li>
</ol><br></br>
+
</ol><br><br>
  
  
<h5>Gun4 PPIX binding by fluorescence spectrophotometry</h5>
+
    <h4 style="text-align: center;">Gun4 PPIX binding by fluorescence spectrophotometry</h4></b>
<h6>Preparation of PPIX</h6>
+
<h6><Preparation of PPIX</h6><p>
 
<ol>
 
<ol>
 
<li>Approximately 1mg of dried PPIX was dissolved in 5ul of 1M NaOH, and diluted with 200ul of deionized water.</li>
 
<li>Approximately 1mg of dried PPIX was dissolved in 5ul of 1M NaOH, and diluted with 200ul of deionized water.</li>
Line 226: Line 229:
 
<li> The excitation wavelength was set at 280nm and the emission at measure from 580nm to 800nm. The emission maxima for protein bound PPIX is at 635nm.</li>
 
<li> The excitation wavelength was set at 280nm and the emission at measure from 580nm to 800nm. The emission maxima for protein bound PPIX is at 635nm.</li>
 
</ol>
 
</ol>
<br></br>
 
  
 
<h5>References</h5>
 
<h5>References</h5>
 
<ol>
 
<ol>
  
<li>William,F.,  Studier. (2014). Stable Expression Clones and Auto-Induction for Protein Production in E.coli. Structural Genomics: General Applications, Methods in Molecular Biology.1091, 17-32 DOI 10.1007/978-1-62703-691-7_2 </li>
+
<li>Studier, F. W. (2014). Stable expression clones and auto-induction for protein production in E. coli. In <i>Structural Genomics</i> (pp. 17-32). Humana Press.</li>
  
<li>Meinecke, L., Alawady, A., Schroda, M., Willows, R., Kobayashi, M.C,. Niyogi, K.K,. Grimm, B., Beck, C.F. (2010). Chlorophyll-deficient mutants of Chlamydomonas reinhardtii that accumulate magnesium protoporphyrin IX. doi: 10.1007/s11103-010-9604-9 </li>
+
<li>Meinecke, L., Alawady, A., Schroda, M., Willows, R., Kobayashi, M. C., Niyogi, K. K., ... & Beck, C. F. (2010). Chlorophyll-deficient mutants of Chlamydomonas reinhardtii that accumulate magnesium protoporphyrin IX. <i>Plant molecular biology, 72</i>(6), 643-658.</li>
  
<li>Sawicki,A. & Willows,R.D.(2007).S-Adenosyl-L-methionine:magnesium-protoporphyrin IX O-methyltransferase from Rhodebacter capsulatus: mechanistic insights and stimulation with phospholipids. Journal of Biochemistry, <i>406</i>, 469-478. doi: 10.1042/BJ20070284 </li>
+
<li>Sawicki, A., & Willows, R. (2007). S-Adenosyl-L-methionine: magnesium-protoporphyrin IX O-methyltransferase from Rhodobacter capsulatus: mechanistic insights and stimulation with phospholipids. <i>Biochem. J, 406</i>, 469-478. </li>
  
  

Revision as of 01:36, 19 September 2015

Experiments and Protocol
Project Description page
Link to Experiments & Protocols page
Link to Results page
Link to Notebook page
Link to Safety page

Fig 1. An overview of the methodology. A modified BioBrick Standard Assembly was used. Alkaline phosphatase on the target vector backbone for the genes; ChlM and those from Photosystem II. The Gibson Assembly method was used in order to insert composite part ChlH into the BioBrick vector plasmid.

Experiments and Protocol

Making Competent Cells

  1. Using a sterile plastic loop, pick 10-12 large (2-3mm in diameter) colonies from the plate. Inoculate to 150mL of SOB medium in a 1L flask, and grow overnight at 18-22oC, 200-250rpm.
  2. A600 should be 0.2-0.8 to harvest. Preferably, cells should be in mid log phase with A600 ~ 0.5.
  3. Remove the flask from the incubator and place on ice for 10 minutes.
  4. Transfer the culture to a 15mL centrifuge tube and spin at 2500 x g for 10 min at 4oC
  5. Pour off and discard the supernatant, and immediately place the tube on ice.
  6. Resuspend your cells in 1mL of ice-cold TB buffer, make sure there are no clumps of cells left, but also treat your cells gently and keep them cold.
  7. Add ice-cold TB buffer to bring volume up to 1/5th of the original culture volume (~30mL in this case). Mix the tube by gently inverting 3 times.
  8. Incubate the tube on ice for 10 minutes.
  9. Centrifuge at 2,500 x g for 7 minutes at 4oC, discard the supernatant.
  10. Gently resuspend the cells in ~1/20th of the original culture volume of ice-cold TB buffer. NOTE: 1/20th is based on and OD600 of 0.5, so adjust volume accordingly. e.g. if the culture OD600 was 0.1 then resuspend in 1/100th of original volume.
  11. Pre-chill 1.5ml Eppendorf tubes on ice. Add 930µl of your cell suspension, keeping the remainder on ice in the 15mL tube.
  12. Add 70µl of DMSO to the 930µl of cell suspension. Mix gently by swirling, and place on ice.
  13. Aliquot 100µl of the competent cell/DMSO mixture into fresh microcentrifuge tubes. Label the tubes with: Date – Strain. Snap freeze with liquid nitrogen.
  14. Repeat step 11-13 for the rest of your cell suspension in step 10. Store cells at -80oC
TB Buffer
Ingredients: 3g PIPES, 10.9g MnCl2-4H2O, 2.0 g CaCl2-2H2O, 18.6 g KCl.
Methods: All components (except for MnCl2-4H2O) were mixed and dissolved in 500 mL of water and pH adjusted to 6.7 with KOH. Then, MnCl2-4H2O, was dissolved in 300 mL of water, mixed and solution adjusted to 1 L. Sterilisation via filtration followed through a pre-rinsed 0.45 µm filter unit and stored at 4°C.
SOB Media (for competent cells)
Ingredients: 10g bacto-tryptone, 2.5g bacto-yeast, 1000µl NaCl, 417µL KCl, 1.205g Mg2SO4 & 500mL Milli-Q water.
Methods: The adjusted quantities were combined in a 1 L measuring column with constant stirring and then placed in the autoclave for sterilisation (121oC, 15 min, standard liquid cycle).

Agarose Gel Electrophoresis

  1. Mix 1ul of 1kbp DNA ladder with 6ul of loading dye (bromophenol blue) and 4ul of 1x TAE buffer and load into first well
  2. Mix 5ul of plasmid DNA with 1ul of loading dye and load into wells.
  3. Run gel at 90V for 45minutes approximately
  4. Gel image is taken using Biorad GelDoc
EDTA Buffer
Ingredients: 37.22g EDTA solid, 180 mL of water and pH adjusted to 8.0 using 10M NaOH.
Methods: Components were combined then pH adjusted.
50 X TAE Buffer
Ingredients: 121.2g Tris base (dissolved in water) with 28.55mL of glacial acetic acid & 50mL 0.5M EDTA (pH 8.0).
Methods: Components were combined then make up to 500ml with distilled water.
Making Agarose Gel
Ingredients: 1g agarose powder, 100ml of 1 x TAE
Methods: Dissolve agarose in TAE by microwaving for 1 minute, wait till cool to touch, then add 2ul of GelRed and pour into the casette.

Composite Part Ligation

The assembly of composite parts from two existing BioBricks i.e. BioBrick plasmid A (parent vector) and BioBrick plasmid B (gene to be inserted) was performed through a restriction digest/ligation protocol.

  1. 200ng of each BioBrick plasmid was digested as follows: Plasmid BioBrick A with NEB restriction enzymes SpeI and PstI; plasmid BioBrick B with XbaI and PstI, according to supplier protocol. (1hr @37oC, then 20mins @80oC).
  2. 1µL of Fast alkaline phosphatase (Thermo Scientific) was added to reaction tube of plasmid BioBrick A to dephosphorylate the gene fragments and prevent re-ligation of the parent vector. Reaction tubes were incubated at 37oC for 60 mins, followed by a deactivation step at 80oC for 20 mins.
  3. Ligation was then performed with an insert to vector molar ratio of 3:1. 1µL of T4 ligase (NEB) was added to the mix for ligation, according to supplier protocol. Ligation reactions were performed at 37oC for 60 mins and kept on ice for transformation into chemical competent cells.


Plasmid Prep

  1. Centrifuge @13,200 rpm for 10 min of 1.8mL of overnight cultures in 2mL Eppendorf’s
  2. Discard supernatant and add 1.9 mL of culture and centrifuge again @13,200 rpm for 10 min
  3. Re-suspend pelleted cells in P1 Buffer (250µl)
  4. Add 250µL of P2 buffer & invert 4-6 times (turns homogenous blue)
  5. Add 350µL of N3 & mix by inverting (turns colourless)
  6. Centrifuge @ 10min 13,000 rpm to obtain a pellet
  7. Transfer supernatant in QIA Prep Spin Column by pipetting
  8. Centrifuge 30-60 sec - discard flow through
  9. Wash QIA Prep Spin Column with 0.5mL of PB
  10. Centrifuge for 30-60 seconds - discard flow through
  11. Wash spin column by adding 0.75 mL PE buffer
  12. Centrifuge for 30-60 seconds - discard flow through and centrifuge for a further 1min
  13. Place QIAPrep Column in clean Eppendorf
  14. Elute DNA by adding 30µl of water, stand for 1min, centrifuge for 1min
  15. Plasmid concentration is measured using NanoDrop 2000 spectrophotometer


General PCR Recipe

  • 4 µL of 5x phusion buffer.
  • 0.4 µL dNTPs.
  • 0.6 µL of DMSO.
  • 0.2 µL of polymerase.
  • 11.8 µL of water.
To this mixture, add:
  • 1 µL of forward primer.
  • 1 µL of reverse primer.
  • 1 µL of template.
  • Total volume = 20 µL



PCR settings: A general program for PCR is as follows:

  • Initial denaturation at 98oC for 30seconds.
Followed by 30 repeats of:
  • Denaturation – 98oC for 10seconds.
  • Annealing – 60oC for 10seconds.
  • Extension – 72oC for 2minutes.
  • Final extension – 72oC for 10minutes.


Transformation By Heat Shock

  1. Obtain competent cells from -80oC.
  2. Defrost gently on ice. 100µl is sufficient for 2 transformations.
  3. Add 1-10µl of plasmid DNA/ ligation mix to each tube. Incubate on ice for 30 min.
  4. Heat shock in 42oC water bath for 30 seconds, then back on ice for 2 min.
  5. Add 200µl of SOC media to each tube, and incubate in the 37oC shaker for 1h
  6. For each tube of cells, spread 50µl onto one LB plate with appropriate antibiotic, and 100µl onto a second plate, using aseptic technique. Place your plate upside-down in the 37oC incubator.
LB Agar Plate Preparation
Ingredients: 15g Bacto agar, 1000mL LB media
Methods: Dissolve agar in LB media, autoclave for 15 mins at 121oC; wait until cool to touch, then add appropriate antibiotics before pouring into petri dishes.
LB Media
Ingredients: Tryptone 10g, Yeast extract 5g, NaCl 10g, Milli-Q water to 1000mL.
Methods: Dissolved 10g tryptone, 5g yeast extract and 10g NaCl in 800mL Milli-Q water, making use of a magnetic stirrer. Once dissolved, bring volume up to 1 L using Milli-Q water. Autoclave 1L of the solution (121oC, 15 min, standard liquid cycle).
SOC Media
Ingredients: 10g bacto-tryptone, 2.5g bacto-yeast, 1000µl 5M NaCl, 417µL 3M KCl, 1.205g 20mM Mg2SO4, 805g 20mM D-glucose & 500mL Milli-Q water.
Methods: The adjusted quantities were combined in a 1 L measuring column with constant stirring and then placed in the autoclave for sterilisation (121oC, 15 min, standard liquid cycle).

Protein Expression

  1. Re-transform restriction-digest screened plasmids according to the heat shock transformation protocol.
  2. Screen plates for transformant colonies and place in 5mL of ZYM-5052 broth with appropriate antibiotic concentration at 37oC with shaking until OD600¬ is 2.0 – 3.0.
  3. Take whole volume and place in 45mL of ZYM-5052 broth 1 in a sterile conical flask containing appropriate antibiotic concentration. Incubate at 37oC with shaking.
  4. Cell pellets were collected through centrifugation at 12000 rpm for 5 mins.
  5. Cell pellets were resuspended in re-suspension buffer (Containing: 50mM Tricine NaOH pH 8.0, 2mM MgCl2, 1mM DTT) and whole lysate was collected through a French Press for functional assays of operon protein products in lysate.
Auto induction Medium (ZYM-5052)
  • ZY media 9.57ml
  • 1m MgSO4 20ul
  • 50x5052 200ul
  • 50 x M 200ul
1. 50 x M
  • DI water 80ml
  • Na2HPO4 17.75g
  • KH2PO4 17g
  • NH4Cl 13.4
  • Na2SO4 3.55g
2. 50 x 5052
  • Glycerol 25g (weigh in Beaker)
  • DI water 73ml
  • Glucose 2.5g
  • alpha lactose 10g
3. 1M MgSO4
  • MgSO4.7H2O 24.65g
  • DI water 87ml
4. ZY Media (400mL)
  • Trypton 4g
  • Yeast extract 2g


MgPE Enzymatic Functional Assay

  1. Collect whole lysate, from induced operon 3 containing ChlM expressed proteins, using ChlM pET 2 as a negative control.
  2. Prepare a master mix of recombinant ChlM, 25µl of S-Adenosyl-L- methionine and 65µl of 2µM of Mg-protoporphyrin IX.
  3. Incubate at 30℃ with gentle agitation for 8-10min
  4. 100µL of acetone was added to precipitate protein.
  5. The sample was spun down, to separate the protein and supernatant.
  6. Supernatant was then subjected to UHPLC to and observed peaks.


UHPLC

The UHPLC was performed according to Sawicki and Willows 3 . Briefly, a Shimadzu HPLC system was used at 2ml/min with an Alltech C8 column. A 5 min linear gradient was used for separation of Mg-protoporphyrin IX and Magnesium-protoporphyrin IX mono-methyl ester. Compounds were detected at an excitation wavelength of excitation of 416nm and emission of 595nm.



SDS-PAGE Electrophoresis

  1. Re-suspend pelleted bacterial cells in 200µL of Milli-Q-water
  2. Transfer 50 µL of suspension into new Eppendorf tubes and combine with 50ul of 2xTruSep sample buffer.
  3. Shear the cells using a Hamilton syringe.
  4. Centrifuge the preparation for 3minutes @ 13,000 rpm.
  5. Load 20 µL of the supernatant into gel.
  6. Conduct electrophoresis at a constant voltage (200V) for 1 hour.
  7. Coommassie Stain for ~30 minutes.


Gun4 PPIX binding by fluorescence spectrophotometry

  1. Approximately 1mg of dried PPIX was dissolved in 5ul of 1M NaOH, and diluted with 200ul of deionized water.
  2. Pellet any undissolved particulate by centrifugation, and dilute the supernatant 100-fold with 5% HCl.
  3. The concentration of the PPIX solution was calculated by measuring the absorbance of the diluted solution at 404nm, using the Beer-Lambert equation with molar extinction coefficient of 278000.
  4. A 2uM concentration solution of PPIX was used for the binding assay.
Gun4 PPIX binding
  1. Over-expressed Gun4 containing cell lysates was prepared as described above.
  2. The protein concentration was estimated using Bradford reagent, and the lysate diluted to approximately 0.2mg/ml.
  3. 100ul of the 2uM PPIX solution was added with varying amounts of protein lysate to a total volume of 200ul, and transferred to a clean quartz cuvette for fluorescence measurements in a Cory Eclipse fluorescence spectrophotometer (Agilent)
  4. The excitation wavelength was set at 280nm and the emission at measure from 580nm to 800nm. The emission maxima for protein bound PPIX is at 635nm.
References
  1. Studier, F. W. (2014). Stable expression clones and auto-induction for protein production in E. coli. In Structural Genomics (pp. 17-32). Humana Press.
  2. Meinecke, L., Alawady, A., Schroda, M., Willows, R., Kobayashi, M. C., Niyogi, K. K., ... & Beck, C. F. (2010). Chlorophyll-deficient mutants of Chlamydomonas reinhardtii that accumulate magnesium protoporphyrin IX. Plant molecular biology, 72(6), 643-658.
  3. Sawicki, A., & Willows, R. (2007). S-Adenosyl-L-methionine: magnesium-protoporphyrin IX O-methyltransferase from Rhodobacter capsulatus: mechanistic insights and stimulation with phospholipids. Biochem. J, 406, 469-478.