Difference between revisions of "Team:UFSCar-Brasil/results.html"
Celio.dias (Talk | contribs) |
Celio.dias (Talk | contribs) |
||
Line 103: | Line 103: | ||
<h5 class="ui center aligned header"><b>Figure 6.</b> GFP standard curve (A) in nM per fluorescence and (B) in molecules per fluorescence, from the linear ranging obtained in (A). Each reading was taken three times and using three different samples. Each value was superposed. The regression curve was used to produce the following results. Statistical inferences were made using GraphPad Prism v.5.0.</h5> | <h5 class="ui center aligned header"><b>Figure 6.</b> GFP standard curve (A) in nM per fluorescence and (B) in molecules per fluorescence, from the linear ranging obtained in (A). Each reading was taken three times and using three different samples. Each value was superposed. The regression curve was used to produce the following results. Statistical inferences were made using GraphPad Prism v.5.0.</h5> | ||
− | <img class="ui centered image" src=" | + | <img class="ui centered image" src="https://static.igem.org/mediawiki/parts/f/f1/UFSCariGEM2015_UspAPromoter_Lysate_fluorescenceOsmShock.jpg"> |
<h5 class="ui center aligned header"><b>Figure 7.</b> Lysate fluorescence of 4h expressed GFP under osmotic shock of two constructs (<a href="http://parts.igem.org/Part:BBa_K1620005">BBa_K1620005</a> and <a href="http://parts.igem.org/Part:BBa_K1620006">BBa_K1620006</a>). A significant difference was observed between every pair of values evidenced through t-test at 0.05% of significance, except that higher than 18% PEG 6000. Statistical inferences were made using GraphPad Prism v.5.0.</h5> | <h5 class="ui center aligned header"><b>Figure 7.</b> Lysate fluorescence of 4h expressed GFP under osmotic shock of two constructs (<a href="http://parts.igem.org/Part:BBa_K1620005">BBa_K1620005</a> and <a href="http://parts.igem.org/Part:BBa_K1620006">BBa_K1620006</a>). A significant difference was observed between every pair of values evidenced through t-test at 0.05% of significance, except that higher than 18% PEG 6000. Statistical inferences were made using GraphPad Prism v.5.0.</h5> | ||
Line 113: | Line 113: | ||
<h5 class="ui center aligned header"><b>Figure 8.</b> GFP expression under control of different promoters along osmotic shock. SDS-PAGE 12%. The black arrow indicates GFP expected height. M – Marker BenchMark Protein Ladder (Invitrogen).</h5> | <h5 class="ui center aligned header"><b>Figure 8.</b> GFP expression under control of different promoters along osmotic shock. SDS-PAGE 12%. The black arrow indicates GFP expected height. M – Marker BenchMark Protein Ladder (Invitrogen).</h5> | ||
+ | |||
+ | <p>In this sense, this stress caused by non-ionic compounds, like PEG 6000, seems to be not so effective to production of interesting proteins coupled to this promoter element. Other informations seem to corroborate with our statements, since the carbon sources should be depleted to a full puspA activity, as previously described (Dyk et al. 1995, Gawand and Griffiths 2005). In a strict sense, the carbon sources in this test medium just are not depleted, and are reinforced by PEG 6000, a glycol polymer and potential useful energetic source for E. coli (EcoCyc, Pathway: ethylene glycol degradation) as seen at Figure 9.</p> | ||
+ | |||
+ | <img class="ui centered image" src="https://static.igem.org/mediawiki/parts/a/af/UFSCariGEM2015_UspAPromoter_pathway_of_ethylene_glycol_degradation.jpg"> | ||
+ | |||
+ | <h5 class="ui center aligned header"><b>Figure 9.</b> Escherichia coli K-12 substr. MG1655 pathway of ethylene glycol degradation. Extracted from: http://biocyc.org/ECOLI/NEW-IMAGE?type=PATHWAY&object=PWY0-1280&detail-level=3.</h5> | ||
+ | |||
+ | <p>In summary, the plasmolysis technique was extremely useful to stop the metabolic activity of bacterial cell. A reversal of this framework could trigger the production of proteins coupled to the element puspA. This is the base of our final repellent product, but in order to element characterization, we still observe that increasing concentrations of this osmolyte are not effective to rise up the puspA activity due to its nutritional base for cells.</p> | ||
+ | |||
+ | |||
+ | <div class="ui vertical stripe segment container"> | ||
+ | <h4 class="ui header" id="overview"><b>Carbon starving</b></h4> | ||
+ | |||
+ | <p>As previously referred the promoter puspA is sensitive to growth arrest and starvation. In order to study its behavior the cells carrying puspA::gfp and pJ23101::gfp were grown overnight in Lysogenic broth supplemented with chloramphenicol at 37°C under 200 rpm. Then, the cells were harvested by centrifugation and washed with sterile Tris-Saline (10mM Tris-HCl pH 8.0, 150 mM NaCl). Cells were resuspended in two different media: Lysogenic broth and Poor Medium (2 g/L Ammonium Sulfate, 13.6 g/L Monobasic Potassium Phosphate, 25 mg Lysogenic Broth (HiMedia), 10 μg/mL Cloramphenicol, filter sterilized), at equal optical densities. The cultures were incubated at 37°C under 200 rpm for 4h. Samples were collected at each hour and in the initial times. Finally, the cells were lysed as to the test of osmotic shock. A SDS-PAGE was used to compare the crude protein extracts, and the fluorometer was used to quantify the total produced GFP (as previously referred).</p> | ||
+ | |||
+ | <img class="ui centered image" src="https://static.igem.org/mediawiki/parts/2/2b/UFSCariGEM2015_UspAPromoter_Carbon_starving.jpg"> | ||
+ | |||
+ | <h5 class="ui center aligned header"><b>Figure 10.</b> Carbon starving effect in promotion by elements (A) pJ23101 and (B) puspA. Black arrows show the expected height for GFP band. M – Bench Marker Protein Ladder (Invitrogen), 0h – 4h refers to times of induction, S and I – Soluble and Insoluble portions.</h5> | ||
Revision as of 15:19, 17 September 2015
Results
What did we observe?
Plasmolysis
Main objective of this section is to verify the viability of Escherichia coli cells under treatments with polyethylene glycol (PEG 6000) for different time lapses, and the retaken of metabolism after plasmolysis. To this, we submited this organism to different concentrations of PEG 6000 and have assessed its growth hability. Assays of plasmolysis induction were performed using Escherichia coli K-12 strain Dh5α cells obtained from a culture in lysogeny broth until an optical density at 600 nm of ~ 1.5-2.0, finally cells were harvested by centrifugation and washed with sterile 0.9% saline. Cells were resuspended in plasmolysis media (2% (vo./vol.) glycerol, 50 mM sodium acetate, 10 mM zinc chloride) containing various different concentrations of PEG 6000 (5, 10, 15, 20, 25 and 30% wt/vol). Proportion of cells in the final solution was 0.1% wt/vol. All media and their corresponding sterile controls were kept in triplicate at room temperature.
Primary spectrophotometry analysis, by checking optical density at 600 nm of all triplicates with different concentrations of PEG 6000, as well as the control medium without PEG showed cell growth was inhibited with increasing PEG 6000 concentrations used for stress condition induction (Figure 1).
![](https://static.igem.org/mediawiki/2015/1/1b/UFSCariGEM2015_Figure1_plasmolysis.jpg)
Figure 1: Experimental plot of absorbance versus time in different PEG 6000 concentration.
Figure 1 shows no significant variation of weekly results with increasing PEG 6000 concentration. Optical density of bacterial suspension decreased with rising of PEG 6000 concentration. The growth could be verified since environment concerned an available carbon source for the microorganism, as glycerol. Cells number in the suspension influences the absorbance readings directly, however, possible cells arrangement and conformational changes could help formation of mobile cell complexes changes which affect considerably obtained data. It is due to light reflection direct linking with conformational and structural arrangement of these cells. To verify this, microscopy experiments were carried out through the Gram method (Figure 2).
![](https://2015.igem.org/File:UFSCariGEM2015_Figure1_plasmolysis.jpg)
Figure 2: Cells conformational changes in optical microscopy reveals cell arangement to reduce entropy in medium through hydrophobic interactions.
Above images show increasing PEG concentration in solution inducing formation of cells complexes. This can demonstrate a thermodynamically favorable response to the presence of an extremely hydrophilic molecule in the medium. It is expected that those cells suffer a soft osmotic stress and come into plasmolysis more easily. All this process, could avoid the loss of viability even in solutions containing high contents of osmolyte. Cell viability after plasmolysis, as well as the viability of the control medium without polyethylene glycol were verified weekly by direct plating of 100ul of each triplicate in LB solid medium, also concurrently with the plating serial dilutions in solid medium. The counting of colony forming units demonstrated that viability decreased to zero in control samples, without polyethylene glycol, for about a month and one week. But, in samples containing PEG 6000, this viability was kept (Figure 3).
![](https://static.igem.org/mediawiki/2015/1/1b/UFSCariGEM2015_graph3_plasmolysis.jpg)
Figure 3: Viability after 7 Weeks.
During tests carried out, some optical density readings of triplicates containing 25% of PEG 6000 returned unexpected values and were further investigated as possible contamination signs. Some triplicate platings were done on solid medium and optical microscopy assessment was done. It was found to Staphylococcus sp. contamination in those samples, and after they were excluded. Preliminary results indicate a promising maintenance of bacterial viability at room temperature using plasmolysis. Our results still indicate concentrations near 15% PEG 6000 representing the best option for this purpose. It is possible to note that cells viability suffers a decline in concentrations higher or lower than 15%. Possibly, lower osmolyte concentrations are not enough to promote plasmolysis efficiently, whereas higher concentrations may generate a irreversible osmotic stress frame, not supported by the microorganism (Paga & MacKey, 2000). In this sense, concentrations over 15% osmolyte concentrations can severely inhibit the molecular activity of cells, as shown by other authors, which further investigated this effect in gene induction (Rojas et al., 2014) and proteins synthesis (Clark and Parker, 1984).
Promoter UspA
The universal stress protein A is a response of Escherichia coli cells to growth arrest, and its lacking generates cells with defective growth. For more information about this important protein, please feel free to visit the respective Wikigenes page (https://www.wikigenes.org/e/gene/e/948007.html). The universal stress protein A promoter (also as known as PuspA) is a well characterized promoter element, inducible under several stress conditions (Prytz et al. 2003; Dyk et al. 1995; Nyström and Neidhardt 1992; 1994). This genetic element is dependent to sigma-70 factor (Nyström and Neidhardt 1992; 1994). Its regulation is done through the concentration of a specific stationary phase allormone, guanosine-5'-diphosphate-3'-diphosphate (ppGp), as described elsewhere (Farewell et al. 1998b). The ppGp activate the transcription of downstream elements through a positive regulation of the β-subunit of RNA polymerase. In this sense, the PuspA element is considered a stationary phase promoter. However, in the work of Prytz et al. (2003) a constitutive transcription promotion was observed. Diverse conditions make the Escherichia coli cell enter to stress state, like heat shocks, starvation, osmotic stress, ultraviolet light and other conditions. In these situations, the RNA polimerase sigma factors (ropS) trigger the expression of chaperones and other stress protector molecules, in order to help the cell survive. Previous works have showed the power of the element PuspA, like shown in the Table 1.
![](https://static.igem.org/mediawiki/parts/d/d8/UFSCariGEM2006_Table1_UspAPromoter.jpg)
Table 1.Stress situations capable to induce the element PuspA. Response is given as a ratio of increase in signal of tested cells when compared with control cells.
The force of this genetic element is important for construction of several devices, since environmental monitoring of toxic compounds to devices of triggered expression like this specific situation. We have drawn the sequence for an improved PuspA promoter from an analysis of 400bp upstream the Universal Protein A (UspA) gene in E. coli K12. First we have used the Scope tool (http://genie.dartmouth.edu/scope/), and we found the domain WWRBAM:
![](https://static.igem.org/mediawiki/parts/4/4c/UFSCariGEM2015_WWRBAM_domain.jpg)
Figure 1. Domain WWRBAM obtained from analysis of 400pb upstream starting of UspA gene, using Scope.
This analysis indicated to us the sequence 5'-AAGCAT-3' as vital and potential component of promoter region. Restarting the analysis with Neural Network Promoter Predictor (http://www.fruitfly.org/seq_tools/promoter.html), the following sequence was obtained:
5' – TGAGTTTTCAATCACCTTTCCATCCACCTTATATTAAGCATGGAGG - 3'
This sequence has a transcription starting at bolded T (-10) and italicized the sigma factor binding sites. The confidence of the promotion activity of this sequence was estimated as 100%. Using this part attached to the iGEM prefix and suffix through polymerase chain reaction (PCR), the construction of pSB1C3 derived vector was carried out with current assembly methods, as shown below (the orientation is 5' > 3'):
![](https://static.igem.org/mediawiki/parts/0/04/UFSCariGEM2015_pUSPA.jpg)
Figure 2. Promoter final construct.
Interestingly, the lineages carrying these plasmids have a slow growth behavior, in comparison to cells carrying the pSB1C3 plasmid. In order to report its activity, we have fusioned the biobrick part BBa_E0840 (RBS/B0030+GFP/E0040+Terminator/B0015) downstream to our promoter making other new biobrick. This construct was used to evaluate the puspA element activity. Since the start, we observed a green color in colonies of E. coli DH5α after their growth at 37°C and posterior incubation for 16h at 4°C in lysogenic agar supplemented with chloramphenicol 10 μg/mL (LB agar plus Chloram.). These colonies were selected and passed through a confirmatory polymerase chain reaction. The best producing clone was selected and used for further experimentation and plasmid production.
Cold shock performance
The E. coli DH5α clone carrying the construct puspA::gfp was grown in 100 mL of lysogenic broth containing chloramphenicol as previously referred (LB plus chloram) in a 500 mL Erlenmeyer flask under 200 rpm at 37°C. After culture reach optical density of 0.5, a sample of 5 mL was collected for protein analysis. The remaining broth was transferred to a 4°C chamber without agitation for 16 h. The cells were harvested by centrifugation. The protein analysis was carried out through a SDS-PAGE, using normalized samples, and a GFP fluorescence reading in black Elisa plates using Viktor (Perkin-Elmer).
![](https://static.igem.org/mediawiki/parts/9/9f/UFSCariGEM2006_UspAPromoter_Coldshock.jpg)
Figure 3. GFP expression using two constructs (BBa_K1620005 and BBa_K1620006) under cold shock. The S and I fractions refers to soluble and insoluble fractions, obtained after ultrasonic lysis followed by high speed centrifugation and pellet washes. The black arrow indicates GFP expected height in SDS-PAGE using BenchMark protein ladder (Invitrogen).
The SDS-PAGE revealed a similar effect of GFP production using the both tested promoters puspA and a control constitutive promoter pJ23101 (Bba_J23101). In this sense, the constitutive promotion of puspA was reinforced. But, when the fluorescence method was assessed, the fluorescence of samples obtained from puspA promotion was clearly brighter than the control promoter system. Furthermore, the protein quantities despite equivalent are not of the same qualities since the GFP bright is proportional to its folding. In this sense, we can conclude that puspA is not only constitutive in certain conditions; it is more suitable for complex folding proteins.
![](https://static.igem.org/mediawiki/parts/8/8f/UFSCariGEM2006_UspAPromoter_Coldshock02.jpg)
Figure 4. Lysate fluorescence of overnight expressed GFP under cold shock of two constructs (BBa_K1620005 and BBa_K1620006). The significant difference observed was evidenced through t-test at 0.05% of significance. Statistical inferences were made using GraphPad Prism v.5.0.
Osmotic shock induced by PEG 6000
As previously reported, we choose to test the promoter element puspA::gfp under different osmotic pressures. The compound poly(ethylene glycol) 6000 kDa, also known as PEG 6000, is a hydrophilic compound which could adsorbs high amounts of water molecules, without change the ionic charge in medium, in this sense, only the reduction of the osmotic pressure would be tested.
The strain E. coli DH5α_puspA::gfp was grown under soft conditions (Lysogenic Broth Chloramphenicol supplemented, 37°C – 200 rpm) overnight, and cells were harvested from 2 mL cultures by centrifugation (4,000 rpm – 4°C, 6 min). These cells were resuspended in 1 mL of Lysogenic broth containing the right antibiotic and different concentrations of PEG 6000 ranging from 0 to 30% (in 2% steps until 20%). The 96 deep well plates were incubated at 37°C for 4 h, under 200 rpm. Finally, the cells were harvested by centrifugation as described before and the lysis was carried out after resuspension of cells in 180 μL of lysis buffer (10 mM Tris-HCl, 100 mM NaCl, 50 mM NaH2PO4, pH 7.5) with 20 μL volume of neutral detergent based lysis solution 10X (10mM EDTA, 10 mg/mL Lisozyme, 10% Triton X-100, 100 mM Tris-HCl – pH 8) at room temperature for 15 min with careful agitation at each 5 min. After lysis, the cell debris was precipitated by long time centrifugation (4,000 rpm – 4°C, 45 min) and the supernatant was collected to a 96 well Elisa black plate. The GFP was measured in Viktor (Perkin Elmer) plate fluorometer.
A 6xHis-Tagged version of our GFP was previously cloned into pET28a vector. The expression was carried out using a cell culture of Escherichia coli Rosetta(DE3) at optical density of 0.5 in lysogenic broth supplement with chloramphenicol (20 μg/mL), kanamycin (25 μg/mL) and 0.4mM IPTG. The induction time and temperature were 4h at 37°C, respectively, in a shaker (200 rpm). Cells were harvested by centrifugation and lysed by ultra-sonication. The lysate was further centrifuged and 0.22 μm filtered. The GFP present in supernatant was purified using an imidazole gradient in a Ni^{2+}-NTA (Qiagen) column. The expression and purification profiles follow attached. A standard curve of purified GFP and fluorescence was previously established allowing the comparison of molecule number and promoter elements.
![](https://static.igem.org/mediawiki/parts/9/93/UFSCariGEM2015_UspAPromoter_GFP_purification.jpg)
Figure 5. GFP purification and expression under control of T7 promoter profile in SDS-PAGE 12%. Pure protein obtained in 250 mM (A and B) were used after dialysis to construction of standard curve. A BCA protein quantitation (Promega) was carried out. Legend: M – Marker BenchMark Protein Ladder (Invitrogen), NI – non induced, IN – insoluble portion of induced sample, S – soluble portion of induced sample, FT – flow through, W – wash, Imidazol gradient (10 mM – 250 mM, with different fractions A-C).
High amounts of GFP have shown a quantic quenching phenomenon, where the equipment is not able to detect proportional changes when high protein quantities are changed. In figure 6A, the plateau is evident and starts at 48 nM, to avoid this, we have adopted a standard curve (Figure 6B) using the linear region of the graphic (between 0 nM and 20 nM), transforming the GFP concentration (nM) to molecules. The collected data follow below:
![](https://static.igem.org/mediawiki/parts/a/ad/UFSCariGEM2015_UspAPromoter_GFP_standard_curve.jpg)
Figure 6. GFP standard curve (A) in nM per fluorescence and (B) in molecules per fluorescence, from the linear ranging obtained in (A). Each reading was taken three times and using three different samples. Each value was superposed. The regression curve was used to produce the following results. Statistical inferences were made using GraphPad Prism v.5.0.
![](https://static.igem.org/mediawiki/parts/f/f1/UFSCariGEM2015_UspAPromoter_Lysate_fluorescenceOsmShock.jpg)
Figure 7. Lysate fluorescence of 4h expressed GFP under osmotic shock of two constructs (BBa_K1620005 and BBa_K1620006). A significant difference was observed between every pair of values evidenced through t-test at 0.05% of significance, except that higher than 18% PEG 6000. Statistical inferences were made using GraphPad Prism v.5.0.
First of all, the puspA promoter has a higher activity than pJ23101 in all tested PEG concentrations. The data revealed a trend to reduction of GFP production along the PEG 6000 concentration increases from 0% to 30% (wt. / vol.). Higher concentrations of PEG 6000 turns the water molecules less available to cell, in this sense, we observe a phenomenon called plasmolysis. During plasmolysis the bacterial metabolism is suspended or reduced to very low rates, allied to a cell volume reduction implying in a retraction of the cytoplasmic volume. Despite the occurrence of all these events, no one of them is observable, even under microscope. This process could be useful for us, in order to long term conservation of the bacterial cultures, to distribution of our biosynthetic limonene based repellent.
The preliminary results still indicated a need for osmotic pressure changes triggered by ionic compounds to start or reinforces puspA activity. Previous studies used NaCl as an osmotic agent. We believe that these ions trigger a complete stimulus, involving efflux pumps. Our results allied to literature indicated to us, the need of an ionic unbalance allied to higher osmotic pressures and lower water activities to trigger puspA.
![](https://static.igem.org/mediawiki/parts/7/77/UFSCariGEM2015_UspAPromoter_GFP_expressionOsmShock.jpg)
Figure 8. GFP expression under control of different promoters along osmotic shock. SDS-PAGE 12%. The black arrow indicates GFP expected height. M – Marker BenchMark Protein Ladder (Invitrogen).
In this sense, this stress caused by non-ionic compounds, like PEG 6000, seems to be not so effective to production of interesting proteins coupled to this promoter element. Other informations seem to corroborate with our statements, since the carbon sources should be depleted to a full puspA activity, as previously described (Dyk et al. 1995, Gawand and Griffiths 2005). In a strict sense, the carbon sources in this test medium just are not depleted, and are reinforced by PEG 6000, a glycol polymer and potential useful energetic source for E. coli (EcoCyc, Pathway: ethylene glycol degradation) as seen at Figure 9.
![](https://static.igem.org/mediawiki/parts/a/af/UFSCariGEM2015_UspAPromoter_pathway_of_ethylene_glycol_degradation.jpg)
Figure 9. Escherichia coli K-12 substr. MG1655 pathway of ethylene glycol degradation. Extracted from: http://biocyc.org/ECOLI/NEW-IMAGE?type=PATHWAY&object=PWY0-1280&detail-level=3.
In summary, the plasmolysis technique was extremely useful to stop the metabolic activity of bacterial cell. A reversal of this framework could trigger the production of proteins coupled to the element puspA. This is the base of our final repellent product, but in order to element characterization, we still observe that increasing concentrations of this osmolyte are not effective to rise up the puspA activity due to its nutritional base for cells.
Carbon starving
As previously referred the promoter puspA is sensitive to growth arrest and starvation. In order to study its behavior the cells carrying puspA::gfp and pJ23101::gfp were grown overnight in Lysogenic broth supplemented with chloramphenicol at 37°C under 200 rpm. Then, the cells were harvested by centrifugation and washed with sterile Tris-Saline (10mM Tris-HCl pH 8.0, 150 mM NaCl). Cells were resuspended in two different media: Lysogenic broth and Poor Medium (2 g/L Ammonium Sulfate, 13.6 g/L Monobasic Potassium Phosphate, 25 mg Lysogenic Broth (HiMedia), 10 μg/mL Cloramphenicol, filter sterilized), at equal optical densities. The cultures were incubated at 37°C under 200 rpm for 4h. Samples were collected at each hour and in the initial times. Finally, the cells were lysed as to the test of osmotic shock. A SDS-PAGE was used to compare the crude protein extracts, and the fluorometer was used to quantify the total produced GFP (as previously referred).
![](https://static.igem.org/mediawiki/parts/2/2b/UFSCariGEM2015_UspAPromoter_Carbon_starving.jpg)
Figure 10. Carbon starving effect in promotion by elements (A) pJ23101 and (B) puspA. Black arrows show the expected height for GFP band. M – Bench Marker Protein Ladder (Invitrogen), 0h – 4h refers to times of induction, S and I – Soluble and Insoluble portions.
References
PAGA, R.; MACKEY, B. Relationship between Membrane Damage and Cell Death in Pressure-Treated Escherichia coli Cells: Differences between Exponential – and Stationary – Phase Cells and Variation among Strains. Applied And Environmental Microbiology. 2000.
CLARK, D.; PARKER, J. Proteins induced by high osmotic pressure in Escherichia coli. FEMS Microbiology Letters. 1984.
ROJAS, E.; THERIOT, J. A.; HUANGA, K. C. Response of Escherichia coli growth rate to osmotic shock. Department of Bioengineering. Stanford University. 2014.
Our amazing sponsors!
![](https://static.igem.org/mediawiki/2015/2/24/UFSCar-Brasil_logos1.png)