• Project Description
• Overview
• Background

• Ag43 Secretion System
• Overview
• Design
• Experiments
• Result
• Conclusion

• Other Systems
• His-tag Inactivation System
• Co-expression System
• Discussion

• Future Work

• Modeling

Other Systems

うまくいきませんでした

His-tag Inactivation System

Overview

One of the ways to produce large quantities of a recombinant toxic protein in E.coli is to aggregate it as inclusion bodies (IBs). IBs are insoluble protein aggregations observed in bacteria overexpressing heterologous genes whose products fail to attain a soluble (de Groot et al. 2008). Protein aggregation can lose the activity of the protein to some extent. So we optimized inclusion bodies to achieve large amounts of the toxic peptide, thanatin.

It’s known that using a histidine tag as a fusion partner for protein expression did affect the formation of inclusion bodies. In our project, we intended to express thanatin with a 10x His-tag at the N terminus as an inclusion body, then cleave of a His-tag with some protease (TEV protease) leading successfully to express thanatin in a soluble form.

• Inclusion bodies (IBs)

Inclusion bodies are major protein aggregates commonly occurring in recombinant bacteria when the expression of plasmid-encoded genes is directed at high rates

• His tag

His tag (histidine-tag) is an amino acid motif consisting of successive histidine residues, often at the N- or C-terminus of the target protein. His tag is often used for affinity purification of tagged recombinant proteins expressed in Escherichia coli.

• TEV potease

TEV protease is a highly sequence-specific cysteine protease from Tobacco Etch Virus (TEV). TEV protease uses a cysteine as its catalytic nucleophile. The native cut sites of this protease is Glu-Asn-Leu-Tyr-Phe-Gln-/-(Gly/Ser) where ‘/’ is the cleaved peptide bond

Design

First, we made the construct like figure 1 (Plac-B003x-Thanatin-dT on 1C3). Thanatin is under control of one of inducible promoters; Plac promoter. In the absence of IPTG, lacI protein act as repressor and bind to promoter region, therefore expression of downstream gene of Plac is negatively controlled. By adding IPTG, this inducer interact with lacI and cause the conformation change of repressor. Finally, lacI is released from promoter region, leading recruiting of RNA polymerase and initiation of transcription. We predict that E.coli could be difficult to grow due to leak of Plac (Even if we don’t induce by IPTG downstream gene would be transcribed and thanatin could kill host cells)

Second, we made the construct like figure 2 (Plac-B003x-10xHistag-Thanatin-dT on 1C3).We designed TEV cleave site between 10xHistag and Thanatin.

Experiments

We try to reserch 10xHis tag fusion with thanatin and formation of inclusion body can surely keep thanatin inactive and TEV protease can cleave His tag and get thanatin to be reactive.

How assay

First of all, we make sure that the constructs have correct sequence by sequencing.If we get the expected constructs, we transform it into JM109 and compare the growth curve among different inductive condition.

1. Activity test for Thanatin and 10xHIS thanatin
→Comparing growth curve between the samples one is induced by IPTG and the other is not induced. Diluting the bacterial culture which is enough pre-cultured by 0.1 O.D.600 (Optical Density in λ=600nm) in 2ml LBC.(Lysogeny Broth liquid culture including chloramphenicol)
2. Adding 2µl of IPTG into one and DW into the other.
3. Measuring O.D.600 of these samples once in an hour.

Reactivation of thanatin by TEV proteinase

1. Giving damage to the bacteria body by ultrasonic treatment.
2. Adding TEV protease and buffer to the homogenate
3. Centrifuge 5,000rpm for 2min
4. Conducting MIC test for the supernatant

Result

We made two constructs, BBa_ BBa_K1714002 (pLac-RBS B0034-thanatin-dT on 1C3) (Fig.1) and BBa_K1714003 (pLac-RBS B0034-His10-TEV-thanatin-dT) (Fig.2). But we made sure that these constructs have correct sequence only by colony PCR.

Figure 1. The simple construct of BBa_K1714002 Figure 2. The simple construct of BBa_K1714003

We also made E.coli (DH5alpha) which includes BBa_K1714002 and BBa_K1714003 plasmid for activity test of thanatin and 10xHis thanatin and then attempted to carry out the activity test. (How Assay 1) However, we couldn’t subculture colony of the LBC plate to liquid culture and colony in the LBC couldn’t survive in liquid culture.

Conclusion

Conclusion We could make sure that BBa_K1714001 has almost correct sequence only by colony PCR. And We managed to registry the possible expected construct which is Plac-B0034-thanatin-dT and Plac-B0034-10X His tag thanatin-dT on 1C3 (like Figure 1,2 ) however we couldn’t analysis sequence of these. The main reason for it is that we couldn’t subculture colony of the LBC plate to liquid culture, it is possibly because BBa_K1714002 and BBa_K1714003 are too toxic to survive. In case that the bacteria with these parts can survive they may lose ability to express them for some reasons such as nonsense mutation. Unfortunately, that means production of AMPs by E. coli in large scale is hard through the method of IPTG induction and His tag inactivation system.

Co-expression System

Overview

If we need antimicrobial peptides (AMPs), we usually get it from chemical synthesis method because its amino acid residues are less than another peptide. However chemical synthesis method is unsuitable for the case which a large amount of isotopically labeled peptides is essential for structural study by NMR. In this case, we’ll choose the recombinant synthesis method but, of course, AMPs are harmful to host bacteria. To prevent host toxicity, there is the solution which utilizes expression with inclusion bodies. In addition, in case that it is not promising to form inclusion bodies, we make a partner protein which has the high potential to form inclusion bodies co-express with protein of interest.

• ABF-2

ABF-2 is one of the AMPs derived from Caenorhabditis elegans. ABF-2 belongs to the CSαβ superfamily which has both α-helix and antiparallel β-sheet stabilized by some disulfide bonds and interacts to cell membrane like thanatin. It is difficult for ABF-2 to form inclusion bodies alone. So the recombinant synthesis method by co-expression system may be effectible.

• Lactalbumin family

We choose four Lactalbumin family proteins, concretely HLA (Human α-Lactalbumin), BLA (Bovine α-Lactalbumin), HLZ (Human Lysozyme), BLZ (Bovine Lysozyme), as partner proteins. Because these proteins have negative charge and ABF-2 have positive charge like thanatin, they will interact and form inclusion bodies. There is study which used these proteins for formation of inclusion bodies with ABF-2. (2013. S. Tomisawa et al.)

• Application of co-expression system to Thanatin

Because, as referred to above, thanatin also has positive charge, it is projected that thanatin interacts Lactalbumin family proteins which have negative charge. For reference, the isoelectric point (pI) of ABF-2 is 9.1, on the other hand, pI of thanatin is 10.47. On the other hand, pI of HLA is 4.7, BLA is 4.8, HLZ is 9.3 and BLZ is 6.5. We think the value of pI of thanatin is enough similar with ABF-2 to apply this method for ABF-2 to thanatin.

Design

• Constructs

First of all, we made the construct like Figure 1 (Pbad-B003x-HLA family-dT on 1C3).



Fig. 1 The construct of partner proteins

On the other hand, we also made the construct like Figure 2 (Plac-B0034-AMPs-dT on 1C3).



Fig. 2 The construct of AMPs

Then, we picked up the Plac-B0034-AMPs-dT as fragment from the latter construct and introduce it upstream like Figure 3.



Fig. 3 The complete construct of Co-expression system

Finally, we can induce only thanatin or ABF-2 (AMPs) by IPTG (glucose) and only partner proteins (HLA family).

Experiments

We research which partner proteins is the most suitable for formation of inclusion body with thanatin by using the constructs described above. (HLA, BLA, HLZ or BLZ) And we also research the effect of intensity of RBS by changing it. (B_0032, B_33 or B_0034) In addition, we can get the activation form of thanatin by heating or ionic strengths.

• How assay

First of all, we make sure that the constructs have correct sequence by sequencing.

If we get the expected constructs, we transform it into E.coli (in this case, we used DH5alpha) and compare the growth curve among different inductive condition.

1. Activity test for ABF-2 and Thanatin
→Comparing growth curve between the samples one is induced by IPTG and the other is not induced.
1. Diluting the bacterial culture which is enough pre-cultured by 0.1 O.D.600 (Optical Density in λ=600nm) in 2ml LBC.(Lysogeny Broth liquid culture including chloramphenicol)
2. Adding 2µl of IPTG into one and DW into the other.
3. Measuring O.D.600 of these samples once in an hour.

*In this experiment, we should also make sure that the AMPs induced by IPTG are surely effective to growth curve by changing inductive timing or amount of IPTG.

2. Repressing test of AMPs’ activity by co-expression system
→Comparing growth curve among the different induction patterns, induced by IPTG, arabinose or not.
1. Diluting the bacterial culture which is enough pre-cultured by 0.1 O.D.600 (Optical Density in λ=600nm) in 2ml LBC.(Lysogeny Broth liquid culture including chloramphenicol)
2. Adding 2µl of IPTG and 200µl of arabinose into sample 1, 2µl of DW and 200µl of arabinose into sample 2, 2µl of IPTG and 200µl of DW into sample 3 and 202µl of DW into sample 4.
3. Measuring O.D.600 of these samples once in an hour.

*In this experiment, we should change different patterns of constructs, for example changing strength of RBS or kind of partner proteins.

Result

We could make only two constructs, BBa_K1714004 (Pbad-B0034-BLA family-dT on 1C3) (Fig.4) and BBa_K1714001 (Plac-B0034-ABF-2-dT on 1C3) (Fig.5). We made sure that these constructs have correct sequence but BBa_K1714001 is not sequenced correctly in some part of it.

Fig. 4 The simple construct of BBa_K1714004

Fig. 5 The simple construct of BBa_K1714001

We also made E.coli (DH5alpha) which includes BBa_K1714001 plasmid for activity test of ABF-2 and carried out the activity test. (How Assay 1) There is a result of the test as Table 1.

Chart 1. The growth curve of E.coli including BBa_K1714001 with IPTG or not

As you can see, we can’t say that ABF-2 in BBa_K1714001 has antimicrobial activity.

Conclusion

However we could make sure that BBa_K1714001 has almost correct sequence, we couldn’t make sure that ABF-2 in BBa_K1714001 has antimicrobial activity. It means that the ABF-2 doesn’t express appropriately by any cause. As one of the supposable reason, because ABF-2 is toxic to E.coli, the mutated one which is not toxic to E.coli is selected in transfer E.coli into new culture again and again. We can also imagine that this is something to do with that the sequence of BBa_K1714001 wasn’t perfectly correct or we could get the colonies of E.coli including AMPs by DH5alpha which is less repressive efficiency of lac promotor than JM109. (We couldn’t get constructs including thanatin by DH5alpha)

We couldn’t registry the expected construct which is Plac-B0034-ABF-2-dT -Pbad-B0034-BLA family-dT on 1C3 (like Figure 3) but we can co-express these two constructs in another way. It’s transferring one or the other construct to another plasmid which has another origin and transforming them together. However there is a potential of fail to repress the toxicity by co-expression system because of the difference of copy number of plasmids. For this problem, we should find solution experimentally through trial and error for example changing the strength of RBS, the amount of Inductive materials or the timing of induction.

In this year, because of the lack of time, we couldn’t accomplish the expected experiments in this project. However if we accomplished all experiments we expected and found the best pattern to make inclusion body for thanatin, we may consider so many things. According to the paper (2013 S. Tomisawa et al.), BLA is the best partner protein to make inclusion body for ABF-2. If the value of isotonic point (pI) is main factor to form inclusion body, we can expect that BLA is also the best one for thanatin because the value of pI of thanatin is similar with ABF-2. On the other hand, if we find another protein the best one to form inclusion body for thanatin, the relation with interest protein and partner protein is not only due to the value of pI but other factors for example structure and so on. Originally, because there are so many proteins which have positive charge, it is difficult to form inclusion body only by pI factor. So, if we made all expected constructs, we can’t surely repress the toxicity of thanatin by co-expression system of these four kinds of Lactalbumin family proteins.

Anyway, we should experiment for longer time and get any result about co-expression system. By doing this, not only we can standardize the expression of proteins which have host toxicity and make smooth it, but also we may found something new about AMPs which have many question marks in structural part.

Reference

1. Tomisawa, S., Hojo, E., Umetsu, Y., Ohki, S., Kato, Y., Miyazawa, M., ... & Aizawa, T. (2013). Overexpression of an antimicrobial peptide derived from C. elegans using an aggregation-prone protein coexpression system. AMB Express, 3(1), 45.

←Ag43 Secretion System

Future Work→