Difference between revisions of "Team:TU Delft/Description"

Line 199: Line 199:
 
     <div id="collapse4" class="panel-collapse collapse" role="tabpanel" aria-labelledby="heading4">
 
     <div id="collapse4" class="panel-collapse collapse" role="tabpanel" aria-labelledby="heading4">
 
       <div class="panel-body">
 
       <div class="panel-body">
     
+
<h3>Background</h3>
 +
<p class="lead">For the <a href="https://2015.igem.org/Team:TU_Delft/Modeling#gene">kinetic model</a>(add here link to modelling), we needed to determine the internal concentration of csgA. We cloned a CsgA gene, with a C-terminus His tag, in the construct in a CsgA deficient strain. The His-tag would give us the advantage to use multiple techniques, for measuring the amount of CsgA proteins. Based on the kinetic experiment with GFPmut3, we obtained an internal amount of CsgA in the order of 104 molecules/cell. To validate whether this value was plausible we decided to use a sensitive, and an accurate method: the Western Blot.</p>
 +
<h3>Methodology</h3>
 +
<p class="lead"><b>Experiment 1: Qualitative analysis of internal CsgA_His protein</b></p>
 +
<p class="lead">We performed the Western Blot according to protocol 24. The following samples (Table 4) were used for performing the Western Blotting experiment.</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/f/fc/TU_Delft_2015_tab3.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Table 4. Samples used for the first Western Blot experiment.</figcaption></figure>
 +
<p class="lead">Alternative steps were done during step 5 of the protocol. After incubation we removed the medium, by centrifugation at 4000 rpm for 15 minutes at 4000 rpm. The supernatant was discarded, and the cells were resuspended in sample buffer to obtain an OD600 of 10. The cells were then heated for 10 minutes at 95°C, followed by centrifugation for 5 minutes at 32000 rpm at 4°C. This was then continued with step 6. For step 6, we added 10 µl per slot in the SDS page gel. </p>
 +
 
 +
 
 +
<p class="lead"><b>Experiment 2: Quantitative analysis of the internal CsgA_His protein.</b></p>
 +
<p class="lead">We executed a second experiment to quantify the amount of CsgA_His present in the ΔcsgA_csgA strain. We compared this amount by using a the T-SSRA madrid proteïn solution.  T-SSRA madrid proteïn solution has a set amount of proteins with the His tag on it. Therefore by using the Lambert-Beer law, the concentration of proteïn was calculated to be 200µM. We used a dilution series of 1/10, 1/25,1/50, 1/100, 1/500, 1/1000 (Table 5) in order to make a calibration curve.</p>
 +
 
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/7/78/TU_Delft_2015_tab4.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Table 5.Samples used for the second Western Blot experiment.</figcaption></figure>
 +
<p class="lead">The Western Blot protocol (nr 24) was followed, as executed in experiment 1. </p>
 +
<h3>Results and discussion</h3>
 +
<p class="lead"><b>Experiment 1: Qualitative analysis of internal CsgA_His protein</b></p>
 +
<p class="lead">In Figure 11A, the SDS page gel is shown. The gel is too condensed to visualize a difference between the non-induced and induced samples, because the gel was overloaded.</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/3/32/TU_Delft_Stuff123.png" style="width:35%; background-size: cover;" alt="Generic placeholder image">
 +
<img class="featurette-image img-responsive center-block" src="MISSING IMAGE" style="width:35%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 11: A. SDS page gel, experiment 1 samples as described in Table 1.B. Membrane after blotting, of the samples of experiment 1 (Left to right).</figcaption></figure>
 +
 +
<p class="lead">We saw in figure 11B a band in lane 4 and 8, with a size of circa. 17 kDA. The lanes correspond to the strain ΔcsgA_csgA_his induced rhamnose, after 5 hours and 24 hours of induction. The antibodies bind specifically to the His-tag of proteins, which did not bind to the ΔcsgA_csgA samples, line 1, 2, 5 and 6. Therefore it can be concluded that the strain ΔcsgA_csgA_his produced his-tagged CsgA proteins. The effect of rhamnose was visible when compared to the samples with ΔcsgA_csgA_his without rhamnose induction, lane 3 and 7. There are no bands visible, therefore rhamnose induces the production of CsgA_His. We can conclude with experiment 1 that the antibodies bind specifically to CsgA_His proteins. The CsgA_His proteins are only present when induced with 0.5% rhamnose.</p>
 +
<p class="lead"><b>Experiment 2: Quantitative analysis of the internal CsgA_His protein.</b></p>
 +
<p class="lead">With experiment 1 we proved that the antibodies bind to CsgA_His proteins. The CsgA_His strains produced CsgA_His after induction with 0.5% rhamnose. We executed experiment 2 to determine the internal concentration of CsgA_His proteins, by comparing the bands with the bands of known concentrations of CsgA_His proteins.</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/3/30/TU_Delft_Stuff1234.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 12: Membrane after western blotting; samples of experiment 1 (Right to left).</figcaption></figure>
 +
 
 +
 
 +
<p class="lead">As seen in figure 12, the bands of the calibration curve were visible. The bands of the ΔcsgA_csgA_His were not visible. We still wanted to know the correlation between the thickness of the band, and the concentration of internal CsgA_His. We solved this by comparing the band in lane 8 from figure 11B with the bands seen in figure 11A, to acquire an approximation of the total concentration. The bands in lane 4, and 5 (right to left) were too saturated to measure with the Typhoon. The band in figure 2 was thinner than the two highest concentrations, therefore we removed the last two points from the calibration line.</p>
 +
<p class="lead">The trend line of the concentration (in µM) versus intensity has a formula of:</p>
 +
<p class="lead text-center">Intensity = 509067 · [concentration] + 792496</p>
 +
<p class="lead">We calculated from figure 11B that the average intensity of our samples 2.3*10^6 was. We used the calibration curve (figure 13) we made with the dilution series to determine the average CsgA-His amount per well to be 2.75 μM. The amount of sample we loaded on the gel was 10 µl, therefore the amount of CsgA_His protein in the lane 2.7510-5µmol.</p>
 +
 
 +
<figure><img class="featurette-image img-responsive center-block" src="https://drive.google.com/open?id=0B-tvlSWUhcXXNmxGSGNRRWlSU1U" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 13: Calibration curve of csgA concentration (µM) versus intensity.</figcaption></figure>
 +
 
 +
<p class="lead">The cell concentration was set to an OD600 of 10 at the beginning of the experiment, which corresponds to 8109 cells/ml. 10 µl of this suspension was loaded per gel slot. With the number of cells and the amount of CsgA per slot known we were able to calculate the number of CsgA proteïns per cell: 2.06105 molecules/cell.</p>     
 +
 
 
       </div>
 
       </div>
 
     </div>
 
     </div>
Line 206: Line 240:
  
 
<h2>Conclusions and Future Directions</h2>
 
<h2>Conclusions and Future Directions</h2>
 
+
<p class="lead">With the experiments described previously we achieved biofilm formation with our harmless lab Escherichia coli strains. Also, we managed to limit this expression only when rhamnose (a metabolizable inductor) is supplied. In overall, these results show a promising genetic construct to be used for bio-printing purposes. However, the experiments conducted in that part of the project could not really determine the exact effect of the induction level (i.e. concentration of rhamnose) in the biofilm formation. So, we would like to advise future researchers in this field to look for more detailed and complex experiments that could give information about the biofilm structure differences in time. </p>
 +
<p class="lead">Next to the linking experiments, a step further in biofilm design would be to endow our strains with surface-attachment capability. This property will be analysed in the next part of our project, Affinity Tags.</p>
  
 
   </div>
 
   </div>
Line 216: Line 251:
 
     <div class="container">
 
     <div class="container">
 
       <h1>Affinity Tags</h1>
 
       <h1>Affinity Tags</h1>
       <p class="lead text-muted">Subtitle</p>
+
       <p class="lead text-muted">In this section we worked in the characterization of strains that display special affinity to certain surfaces. </p>
 
     </div>
 
     </div>
 
   </div>
 
   </div>
Line 222: Line 257:
 
   
 
   
 
<h2>Introduction and Motivation</h2>
 
<h2>Introduction and Motivation</h2>
 +
<p class="lead">In our aim to develop a fully customizable biofilm formation process, we wanted to improve their adhesive properties and make them stick to any possible surface. To achieve this goal, we modified the CsgA protein (monomer of the curli nanowire) and added affinity tags to it. First of all, we thought about biofilms that naturally grow in our mouths. These biofilms are a major issue in testing antibacterial products like toothpastes, so we thought we could contribute to that process by adding an affinity tag for the dental surface.  Moreover we also designed other affinity tags of interest. The complete list is shown in Table 6:</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/1/1b/TU_Delft_Tab555.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Table 6. Summary of the affinity tags added to the CsgA molecule in order to give a specific surface attachment</figcaption></figure>
 +
<p class="lead">In the following section, we have analyzed the biofilm-making ability of the strains carrying the plasmids containing the modified csgA sequences. Also, for the HA tag (hydroxyapatite), we have designed an experiment for evaluating the attachment specificity of the modified amyloid to the dental surface.</p>
 +
 +
 
<div class="panel-group" id="accordionproject2" role="tablist" aria-multiselectable="true">
 
<div class="panel-group" id="accordionproject2" role="tablist" aria-multiselectable="true">
 
   <div class="panel panel-default">
 
   <div class="panel panel-default">
 
     <div class="panel-heading panel-title" role="tab" id="heading12">
 
     <div class="panel-heading panel-title" role="tab" id="heading12">
 
       <a class="collapsed" role="button" data-toggle="collapse" data-parent="#accordionproject2" href="#collapse12" aria-expanded="false" aria-controls="collapse12">
 
       <a class="collapsed" role="button" data-toggle="collapse" data-parent="#accordionproject2" href="#collapse12" aria-expanded="false" aria-controls="collapse12">
Microtiter Plate Assay for Ring-Shaped, curli dependent biofilm using differently tagged CsgA proteins
+
Microtiter Plate Assay for ring-shaped, curli dependent biofilm formation using differently tagged CsgA proteins
 
           </a>
 
           </a>
 
     </div>
 
     </div>
 
     <div id="collapse12" class="panel-collapse collapse" role="tabpanel" aria-labelledby="heading12">
 
     <div id="collapse12" class="panel-collapse collapse" role="tabpanel" aria-labelledby="heading12">
 
       <div class="panel-body">
 
       <div class="panel-body">
     
+
  <h3>Background</h3>
 +
<p class="lead">The bacteria that we engineered for the project are capable of producing curli proteins after induction with L-rhamnose. We assessed whether our CsgA-producing bacteria can make a ring-shaped biofilm by adapting the protocol from Zhou et al. (2013) using crystal violet for dying the biofilm-making bacteria. However, now we would like to know if the cells that we engineered to have a special affinity for different surfaces can also make biofilms. For that reason, we repeated the assay with crystal violet for the different strains that produce CsgA but contained in a different plasmid.</p>
 +
<h3>Methodology</h3>
 +
<p class="lead">In the experiment, our CsgA-producing strain of E. coli is induced at a high (0.5% w/v), low (0.2% w/v) and no (0% w/v) concentration of L-rhamnose. Furthermore, csgA-deficient bacteria transformed with an empty plasmid (pSB1C3) are also tested and used as a control (Table 7). All the experiments were carried out in triplicates. A summary of the samples used for the experiment is also shown in Table 7:</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/3/35/TU_Delft_Tab566.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Table 7. Summary of the samples analysed after the cells grew on them</figcaption></figure>
 +
<p class="lead">The cultures of all the transformed strains were grown and induced in a 96-well plate. 40 hours after the induction, the samples were washed with water (in order to disregard non-attached, planktonic cells) and dyed with crystal violet. Finally, the wells were filled with ethanol so all the content can dissolve in the liquid phase and be measured in the plate reader in triplicates.</p>
 +
<h3>Results and discussion</h3>
 +
<p class="lead">The absorbance at 590 nm of wavelength is measured for all the samples, obtaining the following results displayed as bar plots (figure 14, 15, 16, 17, and 18):</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/3/3e/TU_Delft_csgarfp.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 14. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates.  CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. CSGARFP0, CSGARFP2 and CSGARFP5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA under an inducible promoter and RFP under a constitutive promoter. The termination of 0, 2 and 5 denotes the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).</figcaption></figure>
 +
 
 +
 
 +
 
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/e/e1/TU_Delft_ha.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 15. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates.  CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. HA0, HA2 and HA5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to the hydroxyapatite tag under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).</figcaption></figure>
 +
 
 +
 
 +
<figure><img class="featurette-image img-responsive center-block" src="https://2015.igem.org/File:TU_Delft_hist.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 16. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates.  CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. HIST0, HIST2 and HIST5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to a 6xHis tag under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).</figcaption></figure>
 +
 
 +
 
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/a/a9/TU_Delft_mfp3.png
 +
" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 17. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates.  CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. MFP30, MFP32 and MFP35 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to the mfp3 peptide under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).</figcaption></figure>
 +
 
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/f/f1/TU_Delft_mfp5.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Figure 18. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. MFP50, MFP52 and MFP55 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to the mfp5 peptide under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).</figcaption></figure>
 +
 
 +
<p class="lead">As we also observed in the crystal violet assay for the plasmid containing the csgA gene, the sample that can also express RFP as a reporter gene is also able to make a biofilm. That confirms that this strain can be used for the experiments of characterization of the 3D printing, as the reporter gene expression is not interfering in the biofilm-making ability. </p>
 +
<p class="lead">On the other hand, the tagged CsgA proteins seem to have biofilm-making capability despite having a peptidic modification in the structure. To confirm that there is a real change between the analysed samples and the empty plasmid control, a significance analysis was performed for α=0.05 (Table 8.).</p>
 +
<figure><img class="featurette-image img-responsive center-block" src="https://static.igem.org/mediawiki/2015/7/7c/TU_Delft_tab77.png" style="width:100%; background-size: cover;" alt="Generic placeholder image"><figcaption>Table 8. Significance analysis of the samples analysed, with a significance α value of 5%. All the samples but the 0.5% induction of CSGARFP5 display a significant difference when compared to the empty plasmid homolog sample (CTRL). </figcaption></figure>
 +
 
 +
<p class="lead">The significance analysis shows how all the samples with a modified CsgA can efficiently create a biofilm, when compared with an empty plasmid control (i.e. without csgA expression). The sample with CsgA and RFP as reporter gene, when induced with 0.5% w/v of rhamnose, shows no significant difference with an alpha value of 0.05. However, if we look at the p-value (0.0503) we can see that it is actually really close to a 5% of significance. So, the variation could be due to the manipulation.</p>
 +
<p class="lead">We could conclude that the tags added to the CsgA molecule do not have a negative effect on biofilm formation, but also that the rhamnose concentration used for induction do not have a remarkable effect for such a long induction. Now that the biofilm capability of these strains is proved, proper function tests for the affinity tags are required. With that, we could confirm that we have generated biofilm with special affinity for certain surfaces.</p>
 +
 
 
       </div>
 
       </div>
 
     </div>
 
     </div>

Revision as of 16:04, 18 September 2015

Project Biolink

3D printing of bacterial biofilms, linked together through nanowires

Project Description

In this section we describe the Problem and Solution, our Biolink project as well as an overview of the synthetic biology and printing process in the project.

Problem and Solution

Biofilms are communities of bacteria connected by protein nanowires and surrounded by an extracellular matrix. In this form, they are more resistant and can severely affect human health, industrial productivity and the environment. More precisely, biofilms can cause infections in the human body, affect water quality, and damage industrial installations and equipment. Research and industry have been working to find various solutions for preventing and removing this threat. Potential solutions, such as health products, drugs and industrial removal products, are tested on artificially formed biofilms.

Generic placeholder image
Figure 1. Fields and industries affected by detrimental biofilms (4Inno.com)

The problem with biofilms formed artificially is that they are time consuming, difficult to control and to reproduce. This means that artificial biofilms do not reflect natural biofilm characteristics, making product testing unreliable. Therefore, biofilm-removal products may have a different effect when used in natural settings, with unforeseen negative side-effects and reduced efficiency.

Generic placeholder image
Figure 2. Design of the prototype of our DIY 3D printer

Our project is entitled Biolink and provides an alternative to current biofilm formation technologies. We use a 3D printer, which we call The Biolinker, to form layers of a designed bioink made of bacteria that can bind together into a desired structure.

Biolink helps biofilm-related industries in several ways. First, it brings reproducibility and control to how bacterial biofilms can be artificially formed. Second, biofilm printing adds automation and scalability, making biofilm formation processes more efficient, and thus, cheaper. Hence, Biolink can help to design safer and more effective anti-biofilm solutions by increasing biofilm testing process efficiency and resemblance to reality.

The Biolink Project

Our printing system, called Biolink, can be summarized in the following sentence: biofilm producing bacteria are printed with the help of a flexible scaffold hydrogel. First of all, our homemade bacteria (modified to make biofilms) are mixed with a solution of sodium alginate and subsequently with calcium chloride. There, the Ca2+ molecules keep the structure fixed creating a stable gel. This hydrogel-bacteria mixture is then induced with rhamnose, a sugar specific for our promoter, which makes them synthesize CsgA, the linking molecule. CsgA proteins polymerize to an amyloid structure surrounding the cells and connecting them to each other through the scaffold. Once the cells are all attached in the structure defined by the gel scaffold, it is no longer necessary. Consequently, the hydrogel is dissolved with sodium citrate. But the cells are still connected due to the curli amyloid! So, we obtain a perfectly defined 3D structure made of bacteria.

(SLIDESHOW HERE)

The Biolink project promotes the open source and educational spirit of iGEM. Our 3D printer, the Biolinker, is made of K’NEX construction toys, a DIY solution that is both easy to build and efficient in doing its job. Through policy and practice we try to position our project within the synthetic biology industry and academia, as well as observe socio-economic perception and feedback. We accomplish this by analyzing and interviewing stakeholders, treating ethical and regulatory issues, and building a business plan around our project.

Synthetic Biology in our Project

During biofilm formation, bacteria produce an extracellular matrix made of amyloid structures. These amyloid structures are curli fimbriae, composed of intertwined filaments with a thickness of approximately 4-7 nm (Nguyen, 2014). Therefore, curli production helps bacteria bind to each other in natural biofilms (Taylor et. al. 2012). There are two distinctive operons involved in this highly regulated pathway; csgBA and csgDEFG. The csgBA operon encodes for two proteins: CsgA and CsgB. The csgDEFG operon encodes for the proteins required for the transport of CsgA and CsgB to the cell surface (Dueholm et al, 2011).

On one hand, CsgA is an amyloid protein that acts as monomer for curli formation. On the other hand, the protein CsgB in an integral membrane protein, which binds CsgA to the cell; CsgB acts as an anchor for curli formation. CsgA is transported as an unfolded protein to the extracellular matrix. Once outside the cell, it aggregates with CsgB and the self-assembly of these aggregates form the amyloid fibrils. When CsgA comes in contact with CsgB, the fibrils bind to another cell and the process is repeated again until an entire network has been created (Barnhart et al, 2006).

In our project, we designed an inducible system for synthesizing CsgA in biofilm-making deficient cells. Besides to that, we aimed to create a customized biofilm. To do so, we designed different biobricks that contain a peptide tail attached to the sequence of the biofilm protein CsgA that provides a specific surface affinity. In the end, we planned to use our engineered cells (which also express a fluorescent reporter) for printing in different layers; printing biofilms in 3 dimensions.

The Bioink and Alginate as Supporting Scaffold

In initial experiments printing with bacterial cells dispersed in LB media it quickly became obvious, that a supporting scaffold would be required: due to surface interactions the liquid spread out creating a final thickness of the printed line of almost one centimeter. In tissue engineering sodium alginate is commonly used as a synthetic extracellular matrix material (Rowley et al., 1999). Inspired by this, we took a look at sodium alginate to use as a scaffold material. Sodium alginate is a carbohydrate polymer which can be fairly well dissolved in water, but in contact with calcium ions (or other divalent cations) the polymers are connected via electrostatic interactions forming a hydrogel. Made for instance from LB, this hydrogel could provide bacterial cells with everything they need for weeks and keep them alive. Furthermore, jellification is a reversible process by complexing the calcium ions with citrate and replacing it again with sodium ions (Rowley et al., 1999). Thus, we had found a substance ideally meeting our purpose of being initially liquid, capable of rapidly turning into a viscous gel and reversing this process again.

Strains

The strains used for our project are described here

Escherichia coli K-12 MG1655 PRO ΔcsgA ompR234

This strain of Escherichia coli, used in previous studies of amyloid fiber production in bacteria, is characteristic for having knocked-out the CsgA gene. However, it has all the other genes required for formation of the curli structure.

We have used this strain for our project as the main organism for the printing process. As the bacteria cannot express csgA, we transformed our strains with a plasmid containing this gene under the control of an inducible promoter. Consequently, we can modulate where and when the amyloid fiber will be formed! (Chen, A.Y., et al. 2014)

Generic placeholder image
Figure 3. Photograph of some cells of the strain Escherichia coli K-12 MG1655 PRO ΔcsgA ompR234 visualized with TEM, after they were transformed with a plasmid containing the genes necessaries for producing CsgA.

Escherichia coli Top10

This strain was used exclusively for highly efficient transformations. We used this organism for cloning experiments, plasmid isolations and other basic steps of our project.

Generic placeholder image
Figure 4. Picture of a successful transformation carried out during the project. Top10 cells were used for highly efficient transformations.

Linking Cells

The possibility of printing bacteria in structured layers is supported by the biological property of making biofilms. In this part of the project we studied the proteins that allow cells to produce connections, and how we can modulate their production

Introduction and Motivation

Printing a biofilm requires the bacteria to produce several components that allow them to make a connection between them. Furthermore, they require to attach to the surface where they are printed on. Finally, they need to make the biofilm only when it is desired.

In order to study the connections that exist between bacteria, we focused on the bacterial amyloid curli structure. These bacterial structures contribute to biofilm performances where cells interact with other cells and even surfaces. The curli consists of proteins bound together and to the cell membrane. CsgA, the main subunit, polymerizes in the extracellular space creating an amyloid nanowire; and CsgB anchors this nanowire to the membrane, creating connections between different cells (Joshi et al., 2014).

Consequently, we designed different versions of biobricks (see Parts) coding for the CsgA gene to create a biofilm in a controlled manner from CsgA deficient cells. To prevent premature biofilm formation and clogging of our printer, we designed the expression of CsgA to be inducible by rhamnose so that the biofilm is only created after the cells are printed. This also functions as a safety feature in case of escape. The experiments (and their results) that we used to analyse the expression of CsgA and its promoter are explained in this section.

Background

In the kinetic experiment, the fluorescence signal of the proteins CsgA and CsgA-GFPmut3 (I13504) proteins expressed by our constructs was recorded in time. Besides fluorescence, we measured the OD600 of our cultures in order to normalize the fluorescence signal per cell. The main goal of this experiment was to see, if different induction levels with increasing rhamnose concentrations would lead to a higher production of CsgA. If this was true, the quantity of produced CsgA present in the medium could be controlled. This degree of control is key to achieving our main goal; making a biofilm with reproducible strength.

The obtained results can be used to calculate the promoter strength at different induction levels of rhamnose in our model. In order to use the mathematical model previously constructed in the modeling section, it has to be fitted to GFPmut3 units/cell/second. Therefore, we set up a calibration curve with exactly the same settings as the fluorescent experiment in order to correlate fluorescence signal to units of GFPmut3 per cell.

Methodology

In this experiment, the strains ∆csgA – csgA- I13504 and ∆csgA – csgA strain were both induced with rhamnose at different concentrations. The different induction levels can be found in Table 1.

Generic placeholder image

All conditions (ID 1 – 6) were carried out in triplicates for accurate statistical analysis of the data. The different cultures were grown and induced in a 96-well plate. The OD600 and the fluorescence signal was recorded with a plate reader during an 18-hour period at 30°C.

Results and discussion

In Figure 5, the fluorescent signal was normalized with the number of cells and plotted as a function of time. The red bars denote the error within each ID.

Generic placeholder image
Figure 5: Fluorescence signal normalized by the number of cells for 0% (w/v), 0.2% (w/v) and 0.5% (w/v) rhamnose with the csgA and csgA-GFPmut3 construct. The error bars are included for all experiments.

As observed in Figure 5, only the strains carrying the csgA-GFPmut3 construct induced with 0.2% (w/v) and 0.5% (w/v) showed a clear increase in fluorescence signal over time. The rest of the cultures, didn’t show significant fluorescence over time.

Furthermore, we have showed that increasing concentrations of rhamnose lead to increasing amounts of produced csgA-GFPmut3 and thus fluorescence. Finally, as the fluorescence signal is normalized by the cell density, one can make statements about the activity of the rhamnose promoter. The promoter seems to not be active directly after induction, but activity is observed after a time period of 3 to 4 hours. This is in accordance with data from literature (Wegerer et. Al, 2008), in which low fluorescence levels were observed after 2 hours of induction of the rhamnose promoter.

The calibration line of fluorescence versus mass amount GFPmut3 is given in Figure 6.

Generic placeholder image
Figure 6. Calibration line of the fluorescence signal of GFPmut3 versus its amount in nanograms.

The corresponding function of the GFPmut3 calibration line is:

Generic placeholder image

With massGFP in ng.

In the modelling, the fluorescent data in Figure 5 will be further converted to molecules GFPmut3/cell and the promoter activity will be calculated for both the 0.2% (w/v) and 0.5% (w/v) level of rhamnose induction. With this kinetic experiment, we have proven that our csgA-GFPmut3 construct is able to produce different levels of GFPmut3 by varying the rhamnose concentration.

Background

With our biofilm formation model we aimed to estimate how many times the nanowires overlap in order to predict the biofilm strength. One of the variables required for this model is the persistence length. In order to determine it, we have to visualize the nanowires produced by our engineered bacteria. Moreover we wanted to visualize the difference between induced and uninduced cultures containing the csgA_pSB1C3 plasmid with a rhamnose inducible promoter. These experiments required using an electron microscope.

Electron microscopes use electrons to visualize nano-objects, such as the curli nanowires. In the large “gun” the electrons get enough space to accelerate before they illuminate the sample. As shown in Figure 7 after the electrons are fired by the gun, an electric field of several thousand volts is applied to the electron beam in order to point this to the sample. In the case of an TEM, the electrons pass through the sample where the detector can detect the sample (Boysen & Muir, 2011).

Generic placeholder image
Figure 7: Transmission electron microscopy. The picture on the left represents a model of the TEM and on right the different elements and positions within the microscope (Boysen & Muir, 2011).

Methodology

At first we measured an OD600 of 3.00 of an overnight culture of ∆csgA_csgA_pSB1C3 cells. We diluted the sample down to an OD600 of approximately 0.05, with LB medium + CAM (antibiotic, chloramphenicol). To achieve an end volume of 4 mL we took 67 µl of the overnight culture and 3933 µl of LB + CAM. We let the cells in the new sample grow for 1.5 hour at 37°C to reach the exponential phase (OD between 0.35-0.60). After the cells reached the exponential phase, we induced 1 mL of the culture with 1% rhamnose (250 µl from our 5% rhamnose stock) and also took 1 mL sample of the uninduced culture. We incubated both samples overnight at room temperature to allow the production of nanowires. Finally, the samples were directly added to the grid and the following TEM pictures were taken.

Results

Generic placeholder image
Figure 8: Pictures taken with TEM (magnification 7300 x). The left picture shows the situation without induction (0% rhamnose) and the right one shows the situation with induction (1% rhamnose).

In Figure 8, both the situation, pictured with TEM, without induction (the left one) and with induction (the right one) are shown with a magnification of 7300 x. The situation in which there was no induction with rhamnose, the bacteria did not show any curli formation. The opposite was true for the case in which the cells were induced with rhamnose. As the TEM picture clearly shows, nanowires are present after induction.

Background

The bacteria that we engineered for the project are capable of producing curli proteins after induction with L-rhamnose. However, the goal of our project is the printing of biofilms and not the sole overexpression of these proteins. In order to assess whether our CsgA-producing bacteria can make a biofilm or just remains planktonic, our team adapted the protocol from Zhou et al. (2013) that employs crystal violet (methyl violet 10B) for dying the biofilm-making bacteria that attach to surfaces.

According to the source article (Zhou et al., 2013), a deficient mutant of Escherichia coli is unable to produce a biofilm. By performing this experiment, we want to go further in characterizing our curli proteins; we want to answer this question: are we really making biofilms?

Methodology

In the experiment, our CsgA-producing strain of E.coli is induced at a high (0.5% w/v), low (0.2% w/v) and no (0% w/v) concentration of L-rhamnose. Furthermore, csgA deficient bacteria transformed with an empty plasmid (pSB1C3) are also tested and used as a control (Table 2.). All the experiments were carried out in triplicates.

Generic placeholder image
Table 2. Strains of Escherichia coli used for assess the biofilm formation using crystal violet

The cultures of both strains were grown and induced in a 96-well plate. 40 hours after the induction, the samples were washed with water (in order to disregard non-attached, planktonic cells) and dyed with crystal violet (figure 9.).

Generic placeholder image
Figure 9. 96-well plate used for test the biofilm-making capability of our designed constructs. The first two rows (A-B) contained cultures with 0% w/v of rhamnose. The columns D-E and G-H were inducted with l-rhamnose to a final concentration of 0.2%w/v and 0.5%w/v respectively. The green boxes show the strains carrying BBa_K1583000, and the red ones the control strain with pSB1C3.

Results and discussion

In the end, the wells were diluted with ethanol so all the content can dissolve in the liquid phase. We measured the absorbance at 590 nm of wavelength for all the samples, obtaining the following results (figure 10.):

Generic placeholder image
Figure 10. Microtiter Plate Assay results for testing biofilm formation. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. CSGA0, CSGA2 and CSGA5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with BBa_K1583000. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).

The cells induced with l-rhamnose showed an increased absorbance at 590 (the peak of the dye) when compared to the empty-plasmid controls, and also with the non-induced sample. That results clearly demonstrate how our engineered cells with BBa_K1583000 successfully make biofilms, regarding that the empty plasmid controls and the analysed samples have significantly (table 3.) higher crystal violet retention. On the other hand, a higher concentration of rhamnose is not leading to a higher expression. The cells induced with a 0.2% w/v of rhamnose seem to create better a biofilm structure. However, this could be a consequence of different growth patterns; the cultures induced with 0.5% w/v of rhamnose could have stopped duplicating earlier, so the cell concentration could have decreased. So, the dyed area could be consequently smaller.

Generic placeholder image
Table 3. Significance analysis of the samples analysed, with a significance α value of 10%. All the samples (CSGA) but the 0% induction control display a significant difference when compared to the empty plasmid homolog sample (CTRL).

Background

For the kinetic model(add here link to modelling), we needed to determine the internal concentration of csgA. We cloned a CsgA gene, with a C-terminus His tag, in the construct in a CsgA deficient strain. The His-tag would give us the advantage to use multiple techniques, for measuring the amount of CsgA proteins. Based on the kinetic experiment with GFPmut3, we obtained an internal amount of CsgA in the order of 104 molecules/cell. To validate whether this value was plausible we decided to use a sensitive, and an accurate method: the Western Blot.

Methodology

Experiment 1: Qualitative analysis of internal CsgA_His protein

We performed the Western Blot according to protocol 24. The following samples (Table 4) were used for performing the Western Blotting experiment.

Generic placeholder image
Table 4. Samples used for the first Western Blot experiment.

Alternative steps were done during step 5 of the protocol. After incubation we removed the medium, by centrifugation at 4000 rpm for 15 minutes at 4000 rpm. The supernatant was discarded, and the cells were resuspended in sample buffer to obtain an OD600 of 10. The cells were then heated for 10 minutes at 95°C, followed by centrifugation for 5 minutes at 32000 rpm at 4°C. This was then continued with step 6. For step 6, we added 10 µl per slot in the SDS page gel.

Experiment 2: Quantitative analysis of the internal CsgA_His protein.

We executed a second experiment to quantify the amount of CsgA_His present in the ΔcsgA_csgA strain. We compared this amount by using a the T-SSRA madrid proteïn solution. T-SSRA madrid proteïn solution has a set amount of proteins with the His tag on it. Therefore by using the Lambert-Beer law, the concentration of proteïn was calculated to be 200µM. We used a dilution series of 1/10, 1/25,1/50, 1/100, 1/500, 1/1000 (Table 5) in order to make a calibration curve.

Generic placeholder image
Table 5.Samples used for the second Western Blot experiment.

The Western Blot protocol (nr 24) was followed, as executed in experiment 1.

Results and discussion

Experiment 1: Qualitative analysis of internal CsgA_His protein

In Figure 11A, the SDS page gel is shown. The gel is too condensed to visualize a difference between the non-induced and induced samples, because the gel was overloaded.

Generic placeholder image Generic placeholder image
Figure 11: A. SDS page gel, experiment 1 samples as described in Table 1.B. Membrane after blotting, of the samples of experiment 1 (Left to right).

We saw in figure 11B a band in lane 4 and 8, with a size of circa. 17 kDA. The lanes correspond to the strain ΔcsgA_csgA_his induced rhamnose, after 5 hours and 24 hours of induction. The antibodies bind specifically to the His-tag of proteins, which did not bind to the ΔcsgA_csgA samples, line 1, 2, 5 and 6. Therefore it can be concluded that the strain ΔcsgA_csgA_his produced his-tagged CsgA proteins. The effect of rhamnose was visible when compared to the samples with ΔcsgA_csgA_his without rhamnose induction, lane 3 and 7. There are no bands visible, therefore rhamnose induces the production of CsgA_His. We can conclude with experiment 1 that the antibodies bind specifically to CsgA_His proteins. The CsgA_His proteins are only present when induced with 0.5% rhamnose.

Experiment 2: Quantitative analysis of the internal CsgA_His protein.

With experiment 1 we proved that the antibodies bind to CsgA_His proteins. The CsgA_His strains produced CsgA_His after induction with 0.5% rhamnose. We executed experiment 2 to determine the internal concentration of CsgA_His proteins, by comparing the bands with the bands of known concentrations of CsgA_His proteins.

Generic placeholder image
Figure 12: Membrane after western blotting; samples of experiment 1 (Right to left).

As seen in figure 12, the bands of the calibration curve were visible. The bands of the ΔcsgA_csgA_His were not visible. We still wanted to know the correlation between the thickness of the band, and the concentration of internal CsgA_His. We solved this by comparing the band in lane 8 from figure 11B with the bands seen in figure 11A, to acquire an approximation of the total concentration. The bands in lane 4, and 5 (right to left) were too saturated to measure with the Typhoon. The band in figure 2 was thinner than the two highest concentrations, therefore we removed the last two points from the calibration line.

The trend line of the concentration (in µM) versus intensity has a formula of:

Intensity = 509067 · [concentration] + 792496

We calculated from figure 11B that the average intensity of our samples 2.3*10^6 was. We used the calibration curve (figure 13) we made with the dilution series to determine the average CsgA-His amount per well to be 2.75 μM. The amount of sample we loaded on the gel was 10 µl, therefore the amount of CsgA_His protein in the lane 2.7510-5µmol.

Generic placeholder image
Figure 13: Calibration curve of csgA concentration (µM) versus intensity.

The cell concentration was set to an OD600 of 10 at the beginning of the experiment, which corresponds to 8109 cells/ml. 10 µl of this suspension was loaded per gel slot. With the number of cells and the amount of CsgA per slot known we were able to calculate the number of CsgA proteïns per cell: 2.06105 molecules/cell.

Conclusions and Future Directions

With the experiments described previously we achieved biofilm formation with our harmless lab Escherichia coli strains. Also, we managed to limit this expression only when rhamnose (a metabolizable inductor) is supplied. In overall, these results show a promising genetic construct to be used for bio-printing purposes. However, the experiments conducted in that part of the project could not really determine the exact effect of the induction level (i.e. concentration of rhamnose) in the biofilm formation. So, we would like to advise future researchers in this field to look for more detailed and complex experiments that could give information about the biofilm structure differences in time.

Next to the linking experiments, a step further in biofilm design would be to endow our strains with surface-attachment capability. This property will be analysed in the next part of our project, Affinity Tags.

Affinity Tags

In this section we worked in the characterization of strains that display special affinity to certain surfaces.

Introduction and Motivation

In our aim to develop a fully customizable biofilm formation process, we wanted to improve their adhesive properties and make them stick to any possible surface. To achieve this goal, we modified the CsgA protein (monomer of the curli nanowire) and added affinity tags to it. First of all, we thought about biofilms that naturally grow in our mouths. These biofilms are a major issue in testing antibacterial products like toothpastes, so we thought we could contribute to that process by adding an affinity tag for the dental surface. Moreover we also designed other affinity tags of interest. The complete list is shown in Table 6:

Generic placeholder image
Table 6. Summary of the affinity tags added to the CsgA molecule in order to give a specific surface attachment

In the following section, we have analyzed the biofilm-making ability of the strains carrying the plasmids containing the modified csgA sequences. Also, for the HA tag (hydroxyapatite), we have designed an experiment for evaluating the attachment specificity of the modified amyloid to the dental surface.

Background

The bacteria that we engineered for the project are capable of producing curli proteins after induction with L-rhamnose. We assessed whether our CsgA-producing bacteria can make a ring-shaped biofilm by adapting the protocol from Zhou et al. (2013) using crystal violet for dying the biofilm-making bacteria. However, now we would like to know if the cells that we engineered to have a special affinity for different surfaces can also make biofilms. For that reason, we repeated the assay with crystal violet for the different strains that produce CsgA but contained in a different plasmid.

Methodology

In the experiment, our CsgA-producing strain of E. coli is induced at a high (0.5% w/v), low (0.2% w/v) and no (0% w/v) concentration of L-rhamnose. Furthermore, csgA-deficient bacteria transformed with an empty plasmid (pSB1C3) are also tested and used as a control (Table 7). All the experiments were carried out in triplicates. A summary of the samples used for the experiment is also shown in Table 7:

Generic placeholder image
Table 7. Summary of the samples analysed after the cells grew on them

The cultures of all the transformed strains were grown and induced in a 96-well plate. 40 hours after the induction, the samples were washed with water (in order to disregard non-attached, planktonic cells) and dyed with crystal violet. Finally, the wells were filled with ethanol so all the content can dissolve in the liquid phase and be measured in the plate reader in triplicates.

Results and discussion

The absorbance at 590 nm of wavelength is measured for all the samples, obtaining the following results displayed as bar plots (figure 14, 15, 16, 17, and 18):

Generic placeholder image
Figure 14. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. CSGARFP0, CSGARFP2 and CSGARFP5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA under an inducible promoter and RFP under a constitutive promoter. The termination of 0, 2 and 5 denotes the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).
Generic placeholder image
Figure 15. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. HA0, HA2 and HA5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to the hydroxyapatite tag under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).
Generic placeholder image
Figure 16. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. HIST0, HIST2 and HIST5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to a 6xHis tag under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).
Generic placeholder image
Figure 17. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. MFP30, MFP32 and MFP35 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to the mfp3 peptide under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).
Generic placeholder image
Figure 18. Microtiter Plate Assay results for testing biofilm formation. All the measurements were conducted in triplicates. CTRL0, CTRL2 and CTRL5 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells with pSB1C3, used as a control. MFP50, MFP52 and MFP55 are E. coli K-12 MG1655 PRO ΔcsgA ompR234 cells expressing a plasmid that contains csgA attached to the mfp5 peptide under an inducible promoter. The termination 0, 2 and 5 denote the induction with no rhamnose (0), 0.2% w/v (2) and 0.5% w/v (5).

As we also observed in the crystal violet assay for the plasmid containing the csgA gene, the sample that can also express RFP as a reporter gene is also able to make a biofilm. That confirms that this strain can be used for the experiments of characterization of the 3D printing, as the reporter gene expression is not interfering in the biofilm-making ability.

On the other hand, the tagged CsgA proteins seem to have biofilm-making capability despite having a peptidic modification in the structure. To confirm that there is a real change between the analysed samples and the empty plasmid control, a significance analysis was performed for α=0.05 (Table 8.).

Generic placeholder image
Table 8. Significance analysis of the samples analysed, with a significance α value of 5%. All the samples but the 0.5% induction of CSGARFP5 display a significant difference when compared to the empty plasmid homolog sample (CTRL).

The significance analysis shows how all the samples with a modified CsgA can efficiently create a biofilm, when compared with an empty plasmid control (i.e. without csgA expression). The sample with CsgA and RFP as reporter gene, when induced with 0.5% w/v of rhamnose, shows no significant difference with an alpha value of 0.05. However, if we look at the p-value (0.0503) we can see that it is actually really close to a 5% of significance. So, the variation could be due to the manipulation.

We could conclude that the tags added to the CsgA molecule do not have a negative effect on biofilm formation, but also that the rhamnose concentration used for induction do not have a remarkable effect for such a long induction. Now that the biofilm capability of these strains is proved, proper function tests for the affinity tags are required. With that, we could confirm that we have generated biofilm with special affinity for certain surfaces.

Conclusions and Future Directions

Printing Biofilm Layers Using Fluorescent Cells

Subtitle

Introduction

Conclusions and Future Directions

References

Project Slide Show