Team:EPF Lausanne/Notebook/Yeast
Express dCas9-VP64Integrate pTPGI_dCas9_VP64
We received plasmid pTPGI_dCas9_VP64 from Addgene. The plasmid was found from the article "Tunable and multifunctional eukaryotic transcription factors based on Crispr/Cas". After glycerol stocks and miniprep, we performed a restriction analysis to check the identity of our plasmid. We linearised the plasmid, in order to integrate it into yeast genome. Only our fourth trial to integrate the plasmid was successful.
Materials and methods
- Glycerol stocks
- Miniprep
- Restriction analysis
- Polymerase Chain Reaction
- Yeast integration
- For more details about our procedures, see here.
Results
We used four different sets of enzymes for the restriction analysis. Linearized pTPGI_dCas9_VP64 is expected to be 10'987 bp. We observe that the gel (fig.1a) corresponds to the expected one.
The plasmid was linearised both with EagI HF and NotI HF prior to integration. We integrated each linearised plasmid to obtain two different yeast strains.
Express dCas9-VP64Western Blot of dCas9-VP64
The Western Blot allows to check the expression of dCas9.
Materials and methods
- Western Blot A AJOUTER SUR PROTOCOLS
Results
Results of Western Blot.
Integrate reporter plasmidLinearise reporter plasmid
We received the plasmid pCYC1m_yeGFP from Addgene. The plasmid was found from the article "Tunable and multifunctional eukaryotic transcription factors based on Crispr/Cas".
Materials and methods
- PCR (cf. Protocols). After glycerol stocks and minipreps. we linearised the plasmid by PCR according to the following procedure.
Results
Linearized pCYC1m_yeGFP is expected to be 5'485 bp. Running an agarose gel electrophoresis allowed to verify that we had linearised the plasmid.
Integrate reporter plasmidSynthesize promoters
From the article "Tunable and multifunctional eukaryotic transcription factors based on Crispr/Cas", we learnt that different regions on the promoters could lead to activation or inhibition when dCas9-VP64 was bound. We chose to modify the region of strongest activation, named c3, and the two regions that lead to the strongest inhibition, c6 and c7. We synthesized promoters CYC_0, CYC_1, CYC_2 and CYC_3. They only differ between one another by the three regions c3, c6 and c7. The promoter CYC_0 is the original promoter, already present in the plasmid pCYC1m_yeGFP.
Results
Four different promoters according to Fig. 2.
Integrate reporter plasmidAdd Gibson overlaps by PCR
We amplified the promoters CYC_0, 1, 2, 3 by PCR adding the Gibson overlaps in order to assemble each fragment in the linearised plasmid pCYC1m_yeGFP.
Materials and methods
- PCR (cf. Protocols). The PCR was performed according to the following procedure. The PCR for CYC_3 was repeated a second time, and a third time, due to a frameshift detected by sequencing.
Results
On the gel electrophoresis that we ran after PCR, we observe the three CYC fragments at the right height (Fig.3). These fragments are then used for the Gibson assembly in the plasmid pCYC_yeGFP.
Integrate reporter plasmidGibson assembly of CYC promoters
The promoters CYC_0, 1, 2, 3 have overlaps from previous PCR. They were assembled in the linearised plasmid pCYC1m_yeGFP.
Materials and methods
- Gibson assembly was performed according to the following procedure. The Gibson assembly for CYC_3 was repeated a second time, and a third time.
- Colony PCR was performed according to the following procedure. The colony PCR was repeated a second time for CYC1, a third, fourth, fifth and sixth time for CYC3.
Results
The results of the Gibson assembly are given by a colony PCR. The amplicon should be 308 bp since we used primers f_Gbs_CYC and r_Gbs_CYC. We observe on Fig. 4 that CYC2 on lane 5 and CYC3 on lanes 8 and 9 migrated at the right height. These colonies can be sent to sequencing. Colony PCR was repeated to find CYC1.
After colony PCR, sequencing indicated a frameshift in the CYC3 construct. This is why we repeated the whole process, from the start, for CYC3.
Integrate and express gRNAsLinearize p405ADH1
In order to test the effects of single gRNAs, we opted for a strong constitutive promoter - ADH1 (coming from our backbone plasmid, p405ADH1) - to be placed just before the gRNA expressing cassette.
Materials and methods
- Polymerase Chain Reaction (cf. Protocols). After glycerol stocks and minipreps, the PCR with primers f_Gbs_ADH1 and r_Gbs_ADH1 was performed according to the following procedure.
Results
The size of p405ADH1 plasmid is 7.2 kbp. Altough it is not in frame with the ladder, a different migration rate is observed between the PCR products (p405ADH1 linearized) and the circular plasmid on the 10th lane. Therefore, we assumed that the PCR was successful.
Integrate and express gRNAsSynthesize gRNA-expressing cassette
The design of the gRNA-expressing cassettes is inspired by the article "Multiplexed and programmable regulation of gene networks with an integrated RNA and CRISPR/Cas toolkit in human cells". The activating gRNA, c3, and the two repressing gRNAs, c6 and c7, were synthesized. Each gRNA is fused to the HH ribozyme on the 5' end, and to the HDV ribozyme on the 3' end.
Results
According to Fig.8, we synthesized the activating gRNA cassette c3 and the two repressing gRNA cassettes c6 and c7. Each of these gRNAs: c3, c6, c7, is in four exemplaries. The numbering 0, 1, 2, 3, corresponds to promoter CYC_0, CYC_1, CYC_2, CYC_3.
Integrate and express gRNAsAdd Gibson overlaps by PCR
The gRNA-expressing cassettes, c3_0, c3_1, c3_2, c3_3, c6_0, c6_1, c6_2, c6_3 and c7_0, c7_1, c7_2, c7_3, were synthesized. In this step, overlaps for Gibson assembly were added by PCR.
In order to verify the expression of the gRNAs cassettes, we used fluorescent protein DsRed2 as a reporter gene. In parallel to the gRNA cassettes, the DsRed2 gene was PCR-extracted from plasmid CMVp-dsRed2-Triplex-HHRibo-gRNA1-HDVRibo-pA from Addgene. Overlaps for Gibson assembly were added by PCR. A synthetic polyA tail followed by a part of the Hammerhead ribozyme sequence was included in the reverse primer.
Materials and methods
- Polymerase Chain Reaction (cf. Protocols). Gibson overlaps of DsRed2, c3, c6 and c7 cassettes were added according to the following procedure. As we can see from the gel electrophoresis (Results), we observe no amplicon for c3_0, c3_3 and DsRed2. This PCR had to be repeated (several times) for the three missing fragments.
- A second PCR was necessary to add specific overlaps to c3 and c6. Here is the procedure for this second PCR.
Results
From the gel electrophoresis, we observe that almost every fragment migrated at the right height (207 bp for c3, 208 bp for c6, 308 bp for c7); except c3_0, c3_3 and DsRed2 whose PCR will be repeated.
The second PCR produced the amplicons of c3 and c6, that are ready for the Gibson assembly.
Integrate and express gRNAsGibson assembly of gRNA cassettes
The gRNA cassettes c3_0, c3_1, c3_2, c6_0, c6_1, c6_2, c7_0, c7_1, c7_2 have overlaps from previous PCR. They were assembled in the linearised plasmid p405ADH1.
Materials and methods
- Gibson assembly was performed according to the following procedure. The Gibson assembly was repeated a second time for the missing A0, A2 and AI2.
- Colony PCR was performed according to the following procedure. The colony PCR was repeated a second time, a third, fourth, fifth, a sixth time and several other times.
Results
The results of the Gibson assembly were analysed by colony PCR. Subsequently, the sequencing confirmed we had the desired constructs (Fig.10).
A0 stands for DsRed2-polyA-HH ribozyme-c3_0-HDV ribozyme.
I0 stands for DsRed2-polyA-HH ribozyme-c6_0-HDV ribozyme-HH ribozyme-c7_0-HDV ribozyme.
AI0 stands for DsRed2-polyA-HH ribozyme-c3_0-HDV ribozyme-HH ribozyme-c6_0-HDV ribozyme-HH ribozyme-c7_0-HDV ribozyme.
Measure activation - repression Integrate CYC promoters and gRNAs
Each reporter sequence CYC_0, CYC_1, CYC_2, CYC_3 was integrated together with :
- the corresponding A (activation), I (inhibition), AI (activation and inhibition) among exemplary 0, 1, 2, 3. This was to test activation and inhibition of the appropriate promoter CYC.
- any gRNA that doesn't correspond to the appropriate promoter, for example CYC_1 and A_0. This was to test orthogonality.
- no gRNA. This was to measure the basal level of the promoters.
FUN FACT: on September 8, ten days before wiki freeze, we changed our strain of yeast. The strain we used previously, YM4271, had a mutation on GAL4 gene, preventing its growth in galactose supplemented medium and preventing induction of GAL1 promoter.The new strain is W303.
We present our methods, both for the former strain and the more recent one.
Materials and methods
- Integration (cf. Protocols)
- Plasmids were linearized with restriction enzyme EagI-HF, according to a first, second and third procedure.
- With the former strain YM4271, we executed three different integrations. Here are the descriptions of the first integration of CYC_0, the second for CYC_1 and CYC_2, and the third for CYC_3.
After integration, the yeasts were spread on selection plates. Single colonies were prepared for analysis at the plate reader, untill we realized there was a galactose mutation in the yeast strain. - With strain W303. A COMPLETER : CYC0, CYC1 and CYC2.
Results
After integration, the yeasts were spread on selection plates (Fig.11).
