Difference between revisions of "Team:Freiburg/Results/Immobilization"

Line 95: Line 95:
  
  
<h2>Putting it Alltogether</h2>
+
<h2>Putting it All Together</h2>
  
<p>So far, we have shown that we are able to effect the different steps of the DiaCHIP system independend from each other.  
+
<p>So far, we have shown that we are able to effect the different steps of the DiaCHIP system independently from each other.  
 +
</p>
  
 
+
<h3>All in all, we proved that:</h3>
 
+
<ul>
</p>
+
    <li>DNA can be immobilized reliably on a self-prepared PDMS surface using an amino-label.</li>
 +
    <li>Our DNA sequences are capable of being expressed even when being bound to a surface.</li>
 +
    <li>The expressed protein stays fully functional.</li>
 +
</ul>
  
 
<p>
 
<p>
<h3>All in all, we showed that:</h3>
+
The logic consequence of these results was to combine all the single steps in one experiment. Therefore, we bound DNA coding for His-GFP on two PDMS flow cells and assembled the microfluidic chamber by covering the flow cells with a Ni-NTA coated glass slide. Cell-free expression was conducted with our DiaMIX and a commercial expression kit from reticulocytes.
<ol>
+
<li>DNA can be immobilized reliably on a PDMS surface using an amino-label.</li>
+
<li>our DNA sequences are capable of being expressed by the DiaMIX although being immobilized.</li>
+
<li>the DiaMIX succeeds in the expression fully funtional GFP.</li>
+
</ol>
+
</p>
+
  
 
</div>
 
</div>

Revision as of 20:38, 18 September 2015

""

Wird gerade bearbeitet SB

Cell-Free Expression of Immobilized DNA

An important advantage of the DiaCHIP is the possibility to ship and store information encoded by DNA. From a DNA template array protein arrays can be produced on demand. In order to obtain this template, DNA is fixed on a silicone slide forming one side of our microfluidic chamber. Making use of a cell-free expression system, the DNA can then be transcribed and translated into the respective proteins resulting in the final protein array. The coding sequence of the proteins is genetically fused to a tag allowing their binding to a specific surface on the opposite side of the chamber.

Successful binding of DNA to the Silicone Slide

Figure 1: Scheme of the APTES/PDITC surface. The PDMS (red) is layered with APTES (light grey) and the amino-linker PDITC (dark grey). The hydroxy layer generated during plasma activation is represented in blue.

The core component of the DiaCHIP is the microfluidic chamber composed of a glass slide for protein immobilization and a PDMS (polydimethylsiloxane) flow cell. The silicone PDMS needs to be activated to enable the generation of the DNA template array by binding of the respective sequences. Oxygen plasma is used to initially activate the surface of the PDMS slide by generating a hydroxy layer. This allows linking the silane APTES and finally the crosslinker PDITC. In order to bind the DNA covalently to this surface the respective DNA sequence requires an N- or C-terminal amino group. The structure of this surface is schematically visualized in figure 1. This surface chemistry is identical to the protocol used to immobilize proteins on a glass slide unspecifically (see PDITC surface for immobilizing proteins).
In order to obtain an expression cassette for GFP with an amino group, the target sequence was amplified by PCR using an amino-labeled reverse primer. Additionally, the forward primer was labeled by the fluorescent dye Cy3 to enable visualization by fluorescence microscopy. Successful amplification of the target sequence was verified by agarose gel electrophoresis.

Figure 2: Immobilization of DNA on a PDMS slide. A: Top view on the slide indicating the spotting pattern. B: Cy3 fluorescence showing successful immobilization of amino-labeled DNA. As a negative control, Cy3-labeled DNA without amino group was spotted (indicated by white circles).

Coupling of DNA to the PDMS slide was achieved using a DNA concentration of 25 ng/µl. Either 1 or 3 µl of DNA were spotted directly onto the slide using a distinct pattern (figure 2A). To verify that only the amino-labeled DNA binds specifically, we added spots of non-amino-labeled DNA as a negative control. The slide was subsequently incubated over night and the DNA solution was washed away with ddH2O. After drying, examination of the PDMS flow cell at 532 nm by fluorescence microscopy showed the pattern illustrated in figure 2B. The resulting fluorescence pattern clearly corresponds to the spotting pattern on the slide, thereby confirming that the immobilization of DNA was successful. Spots that were incubated with amino-labeled DNA show a distinct Cy3 fluorescence signal, whereas DNA that was not labeled with an amino group had not bound to the surface.

Cell-Free Expression of GFP From DNA Spots

Figure 3: Fluorescent GFP spots after 30 min of cell-free expression. The fluorescence was measured by placing the assembled chamber under a microscope. The system still was filled with expression mix.

Having verified that DNA can be bound to the PDMS flow cell, the next step was showing that the immobilized sequence is still capable of being transcribed and translated.
The microfluidic chamber consisting of the PDMS slide and a glass slide with a specific Ni-NTA surface was then assembled and filled with cell-free expression mix. The expression was performed for 2 h at 37°C.
The microfluidic chamber was analyzed by fluorescence microscopy afterwards. As shown in figure 3, cell-free expressed GFP was observed in distinct spots exhibiting a clear fluorescence signal. Thus, besides being expressed, the protein was also correctly folded and remained functional.

Putting it All Together

So far, we have shown that we are able to effect the different steps of the DiaCHIP system independently from each other.

All in all, we proved that:

  • DNA can be immobilized reliably on a self-prepared PDMS surface using an amino-label.
  • Our DNA sequences are capable of being expressed even when being bound to a surface.
  • The expressed protein stays fully functional.

The logic consequence of these results was to combine all the single steps in one experiment. Therefore, we bound DNA coding for His-GFP on two PDMS flow cells and assembled the microfluidic chamber by covering the flow cells with a Ni-NTA coated glass slide. Cell-free expression was conducted with our DiaMIX and a commercial expression kit from reticulocytes.