Part | Description | Manufacturer / Partname |
---|---|---|
A fairly strong LED | In our case a 3W green 520 nm LED | Cree XP-E on star circuit board |
A cooling element | Used to prevent the LED from overheating | Fischer Elektronik ICK S |
A constant-current-source | To ensure static LED light (no flickering) | Roschwege GmbH KSQ-3W |
An AC/DC rectifier | Used to grant direct current to the LED | Goobay 67951 |
Two optical lenses | Here we used two identical 60 mm lenses | Thorlabs AC254-060-A |
A camera | We used a SLR camera | Canon 550D |
A microfluidics chamber | Our chamber consists of an iRIf slide attached to a PDMS flow chamber | Made ourselves |
Magnets | Used to attach the flow-cell to the device | 5 mm Neodymium magnets |
A small syringe | We used a regular 10 ml syringe | BRAUN INJEKT 10 ml |
A microfluidic tube | Used to connect the flow chamber with the syringe | - |
A case for the device | 5 mm thick acrylic glass cutouts to hold the parts in place | Ordered at http://formulor.com |
Difference between revisions of "Team:Freiburg/Results/Own Device"
Line 47: | Line 47: | ||
<div class="content_box"> | <div class="content_box"> | ||
− | <div class="results_headline"> | + | <div class="results_headline">Results of Our Self-built Device</div> |
<div class="level1"> | <div class="level1"> | ||
<p> | <p> | ||
− | Here you will see what we were able to measure with the very first prototype of our | + | Here you will see what we were able to measure with the very first prototype of our self-built device. To see the results of our final device, please refer to the <a href="https://2015.igem.org/wiki/index.php?title=Team:Freiburg/Results#device_results">essential results page</a>. A detailed explanation on how to build your own low-priced iRIf device can be found <a href="#how_to_build_your_own_device">on the bottom of this page</a>. |
</p> | </p> | ||
</div> | </div> | ||
Line 58: | Line 58: | ||
<div class="level1"> | <div class="level1"> | ||
<div class="image_box left"> | <div class="image_box left"> | ||
− | <div class="thumb2 trien" style="width:400px"><div class="thumbinner"><a href="https://static.igem.org/mediawiki/2015/f/fc/Freiburg_results-result_device_20150818.jpg" target="_blank" title="results:result_device_20150818.jpg"><img alt="" class="mediabox2" src="https://static.igem.org/mediawiki/2015/f/fc/Freiburg_results-result_device_20150818.jpg" width="400"/></a><div class="thumbcaption"><strong>Figure 1: Result of | + | <div class="thumb2 trien" style="width:400px"><div class="thumbinner"><a href="https://static.igem.org/mediawiki/2015/f/fc/Freiburg_results-result_device_20150818.jpg" target="_blank" title="results:result_device_20150818.jpg"><img alt="" class="mediabox2" src="https://static.igem.org/mediawiki/2015/f/fc/Freiburg_results-result_device_20150818.jpg" width="400"/></a><div class="thumbcaption"><strong>Figure 1: Result of anti-rabbit antibodies binding to rabbit proteins measured in our device.</strong> A: The first picture of the measurement. B: The last picture of the measurement. C: The quotient picture of the first and last picture. D: Schematic illustration of the pattern of the spots on the slide </div></div></div> |
</div> | </div> | ||
− | <div class="results_headline">Our | + | <div class="results_headline">Our First Prototype is Able to Detect Antigen-Antibody Binding</div> |
<p> | <p> | ||
− | For testing our device we | + | For testing our device we immobilized proteins derived from rabbits on an iRIf slide in distinct spots (figure 1 D). The proteins we used were polyclonal anti-HCV (Hepatitis C Virus) antibodies derived from rabbit, which we then aimed to detect with anti-rabbit antibodies. We used these interaction partners in this series of experiment to reproduce a successful measurement, which we previously performed in the professional measuring device. |
− | The binding layer on the iRIf slide consisted of an APTES/PDITC surface. The spots on the slide were | + | The binding layer on the iRIf slide consisted of an APTES/PDITC surface. The spots on the slide were produced by pipetting 3 µl [500 µg/ml] rabbit-anti-HCV protein and 3 µl [1 mg/ml] BSA in an alternating pattern onto the slide. After incubation the slide was blocked for 30 min in BSA solution. |
</p> | </p> | ||
<div class="image_box right"> | <div class="image_box right"> | ||
Line 72: | Line 72: | ||
<a href="https://static.igem.org/mediawiki/2015/c/c9/Freiburg_Device_Prototype_setup.jpg" title="Freiburgs first iRIf prototype"><img alt="Freiburgs first iRIf prototype" src="https://static.igem.org/mediawiki/2015/1/14/Freiburg_Device_Prototype_setup_preview.jpg" width="400"/></a> | <a href="https://static.igem.org/mediawiki/2015/c/c9/Freiburg_Device_Prototype_setup.jpg" title="Freiburgs first iRIf prototype"><img alt="Freiburgs first iRIf prototype" src="https://static.igem.org/mediawiki/2015/1/14/Freiburg_Device_Prototype_setup_preview.jpg" width="400"/></a> | ||
<div class="thumbcaption"> | <div class="thumbcaption"> | ||
− | <strong>Figure 2: | + | <strong>Figure 2: Picture of our first iRIf device prototype.</strong> Note that the Nikon camera was replaced with a Canon 50D. |
</div> | </div> | ||
</div> | </div> | ||
Line 78: | Line 78: | ||
</div> | </div> | ||
<p> | <p> | ||
− | The camera used for the measurement was a Canon 50D. The camera was set to automatically take pictures at an interval of 5 seconds. The exposure time was set | + | The camera used for the measurement was a Canon 50D. The camera was set to automatically take pictures at an interval of 5 seconds. The exposure time was set in order for the pixels in the image to have approx. 80% of maximum light saturation before the solution was flushed onto the chip (figure 1 C & D). |
− | The antibody solution was pipetted into the flow-chamber without the use of any | + | The antibody solution was pipetted into the flow-chamber without the use of any microfluidic device. Instead, a syringe was loaded with 500 µl [5 µg/ml] anti-rabbit antibody solution (diluted in PBS) and slowly released into the binding chamber of the device by gently dispensing it from the syringe. |
− | As can be seen in figure 1 C, the quotient picture clearly | + | As can be seen in figure 1 C, the quotient picture clearly shows binding of anti-rabbit antibodies to the rabbit protein spots. The BSA control spots show none or negligible unspecific binding. |
</p> | </p> | ||
Line 96: | Line 96: | ||
</div> | </div> | ||
− | <div class="results_headline headline_left" id="how_to_build_your_own_device">How | + | <div class="results_headline headline_left" id="how_to_build_your_own_device">How To Build Your Own Device</div> |
<p> | <p> | ||
In this section we will show you how to build your own iRIf device from scratch, using affordable, low-tech material. The design is focused on creating a device that is both low-priced and portable, demonstrating the potential for the DiaCHIP to be used even in rural areas where high-tech laboratories are poorly accessible. | In this section we will show you how to build your own iRIf device from scratch, using affordable, low-tech material. The design is focused on creating a device that is both low-priced and portable, demonstrating the potential for the DiaCHIP to be used even in rural areas where high-tech laboratories are poorly accessible. | ||
</p> | </p> | ||
− | <h2 class="sectionedit4">General | + | <h2 class="sectionedit4">General Principle</h2> |
<div class="level2"> | <div class="level2"> | ||
Line 122: | Line 122: | ||
<p> | <p> | ||
− | As can be seen in figure 2, the basic setup is fairly simple. Light from an LED enters a lense | + | As can be seen in figure 2, the basic setup is fairly simple. Light from an LED enters a lense to obtain a parallel light beam. To achieve this, the distance from the LED to the lense has to be exactly one focal length. |
− | The light | + | The light hits the iRIf slide afterwards where it is reflected (in the same angle as it hits the slide) and enters a second lense, whose purpose is to project a sharp image of the slide onto the CCD chip of the camera. |
</p> | </p> | ||
</div> | </div> | ||
<!-- EDIT4 SECTION "General principle" [2000-2617] --> | <!-- EDIT4 SECTION "General principle" [2000-2617] --> | ||
− | <h2 class="sectionedit5">Construction | + | <h2 class="sectionedit5">Construction Guidance</h2> |
<div class="level2"> | <div class="level2"> | ||
<div class="accordion"> | <div class="accordion"> | ||
<div class="accordion-section"> | <div class="accordion-section"> | ||
− | <a class="accordion-section-title" href="#accordion-1">To | + | <a class="accordion-section-title" href="#accordion-1">To rebuild our iRIf device, we used the following parts:</a> |
<div id="accordion-1" class="accordion-section-content" style="display:none; padding:15px;"> | <div id="accordion-1" class="accordion-section-content" style="display:none; padding:15px;"> | ||
<div class="table sectionedit6"> | <div class="table sectionedit6"> | ||
Line 140: | Line 140: | ||
</tr> | </tr> | ||
<tr class="row1"> | <tr class="row1"> | ||
− | <td class="col0">A fairly strong LED</td><td class="col1"> In our case a 3W green | + | <td class="col0">A fairly strong LED</td><td class="col1"> In our case a 3W green 520 nm LED</td><td class="col2">Cree XP-E on star circuit board</td> |
</tr> | </tr> | ||
<tr class="row2"> | <tr class="row2"> | ||
Line 152: | Line 152: | ||
</tr> | </tr> | ||
<tr class="row5"> | <tr class="row5"> | ||
− | <td class="col0">Two optical lenses</td><td class="col1">Here we used two identical | + | <td class="col0">Two optical lenses</td><td class="col1">Here we used two identical 60 mm lenses</td><td class="col2">Thorlabs AC254-060-A</td> |
</tr> | </tr> | ||
<tr class="row6"> | <tr class="row6"> | ||
Line 161: | Line 161: | ||
</tr> | </tr> | ||
<tr class="row8"> | <tr class="row8"> | ||
− | <td class="col0">Magnets</td><td class="col1">Used to attach the flow-cell to the device</td><td class="col2"> | + | <td class="col0">Magnets</td><td class="col1">Used to attach the flow-cell to the device</td><td class="col2">5 mm Neodymium magnets</td> |
</tr> | </tr> | ||
<tr class="row9"> | <tr class="row9"> | ||
− | <td class="col0">A small syringe</td><td class="col1">We used a regular 10 ml syringe</td><td class="col2">BRAUN INJEKT | + | <td class="col0">A small syringe</td><td class="col1">We used a regular 10 ml syringe</td><td class="col2">BRAUN INJEKT 10 ml</td> |
</tr> | </tr> | ||
<tr class="row10"> | <tr class="row10"> | ||
Line 176: | Line 176: | ||
<div class="thumb2 trien" style="width:610px"><div class="thumbinner"><a class="media lightbox_trigger" href="https://static.igem.org/mediawiki/2015/2/24/Freiburg_results-led_and_magnets_and_flowcell.png" title="results:led_and_magnets_and_flowcell.png"><img alt="Some parts needed to build your own iRIf device" class="mediabox2" src="https://static.igem.org/mediawiki/2015/2/24/Freiburg_results-led_and_magnets_and_flowcell.png" width="600"/></a> | <div class="thumb2 trien" style="width:610px"><div class="thumbinner"><a class="media lightbox_trigger" href="https://static.igem.org/mediawiki/2015/2/24/Freiburg_results-led_and_magnets_and_flowcell.png" title="results:led_and_magnets_and_flowcell.png"><img alt="Some parts needed to build your own iRIf device" class="mediabox2" src="https://static.igem.org/mediawiki/2015/2/24/Freiburg_results-led_and_magnets_and_flowcell.png" width="600"/></a> | ||
<div class="thumbcaption"> | <div class="thumbcaption"> | ||
− | Figure 3 | + | Figure 3: (A) The LED glued to the cooling element with thermal adhesive; (B) The 10 magnets, each 5x5x5 mm as well as a PDMS flowchamber (depth of the flowchamber: 30 µm); (C) One of the lenses used in the setup</div></div></div> |
</div> | </div> | ||
</div><!-- end accordion-section-content --> | </div><!-- end accordion-section-content --> | ||
Line 183: | Line 183: | ||
<p> | <p> | ||
− | A major problem that we confronted when building the device from scratch was to assure that all components are at the exact distance and angle to each other. This is crucial as a slight misplacement of a component may lead to lower signal strengh, blurred images or in the worst case no signal at all. This can be difficult since our device | + | A major problem that we confronted when building the device from scratch was to assure that all components are at the exact distance and angle to each other. This is crucial as a slight misplacement of a component may lead to lower signal strengh, blurred images or, in the worst case, no signal at all. This can be difficult since our device does not rely on straight angles. We overcame this problem by designing a case for the device that ensures the right placement of the components inside the device. This was achieved by calculating all the distances beforehand using physical laws of optics. We realized this by drawing an exact vector graphic blueprint for our device. We then constructed a digital 3D model of the casing based on the vector blueprint to avoid a costly and time-consuming trial and error process (figure 4). |
</p> | </p> | ||
<div class="image_box right"> | <div class="image_box right"> | ||
− | <div class="thumb2 trien" style="width:410px"><div class="thumbinner"><a class="media lightbox_trigger" href="https://static.igem.org/mediawiki/2015/6/69/Freiburg_results-device_3d_perp.png" title="results:device_3d_perp.png"><img alt="" class="mediabox2" src="https://static.igem.org/mediawiki/2015/6/69/Freiburg_results-device_3d_perp.png" width="400"/></a><div class="thumbcaption"><div class="magnify"><a class="internal" href="https://static.igem.org/mediawiki/2015/6/69/Freiburg_results-device_3d_perp.png" title="vergrößern"><img alt="" height="11" src="/igem2015/lib/plugins/imagebox/magnify-clip.png" width="15"/></a></div><strong>Figure 4: 3D model of our device, | + | <div class="thumb2 trien" style="width:410px"><div class="thumbinner"><a class="media lightbox_trigger" href="https://static.igem.org/mediawiki/2015/6/69/Freiburg_results-device_3d_perp.png" title="results:device_3d_perp.png"><img alt="" class="mediabox2" src="https://static.igem.org/mediawiki/2015/6/69/Freiburg_results-device_3d_perp.png" width="400"/></a><div class="thumbcaption"><div class="magnify"><a class="internal" href="https://static.igem.org/mediawiki/2015/6/69/Freiburg_results-device_3d_perp.png" title="vergrößern"><img alt="" height="11" src="/igem2015/lib/plugins/imagebox/magnify-clip.png" width="15"/></a></div><strong>Figure 4: 3D model of our device, built from the vector files used to order the parts.</strong></div></div></div> |
− | <div class="thumb2 trien" style="width:410px;padding-top:10px"><div class="thumbinner"><a class="media lightbox_trigger" href="https://static.igem.org/mediawiki/2015/8/88/Freiburg_results-device_3d_no_walls.png" title="results:device_3d_no_walls.png"><img alt="" class="mediabox2" src="https://static.igem.org/mediawiki/2015/8/88/Freiburg_results-device_3d_no_walls.png" width="400"/></a><div class="thumbcaption"><div class="magnify"><a class="internal" href="https://static.igem.org/mediawiki/2015/8/88/Freiburg_results-device_3d_no_walls.png" title="vergrößern"><img alt="" height="11" src="/igem2015/lib/plugins/imagebox/magnify-clip.png" width="15"/></a></div><strong>Figure 5:The 3D model of our device without walls | + | <div class="thumb2 trien" style="width:410px;padding-top:10px"><div class="thumbinner"><a class="media lightbox_trigger" href="https://static.igem.org/mediawiki/2015/8/88/Freiburg_results-device_3d_no_walls.png" title="results:device_3d_no_walls.png"><img alt="" class="mediabox2" src="https://static.igem.org/mediawiki/2015/8/88/Freiburg_results-device_3d_no_walls.png" width="400"/></a><div class="thumbcaption"><div class="magnify"><a class="internal" href="https://static.igem.org/mediawiki/2015/8/88/Freiburg_results-device_3d_no_walls.png" title="vergrößern"><img alt="" height="11" src="/igem2015/lib/plugins/imagebox/magnify-clip.png" width="15"/></a></div><strong>Figure 5: The 3D model of our device without walls and top part.</strong> Parts have been colorized for clarification - Green: The wall where light exits the device and enters the camera; Pink: a platform holding Cooling-Element+LED in place; Blue: platforms for holding the lenses in place; Gray: rear end wall where the flow chamber is attached to. The slits in the top and bottom part where the magnets have to be fixed</div></div></div> |
</div> | </div> | ||
<p> | <p> | ||
− | We designed the casing so that all the necessary parts (lenses, LED) are held in the correct position safely during the measurement, but remain removable to grant easy transportation of the device (i.e. to the | + | We designed the casing so that all the necessary parts (lenses, LED) are held in the correct position safely during the measurement, but remain removable to grant easy transportation of the device (i.e. to the Giant Jamboree). Figure 5 illustrates the parts that hold the lenses and LED in place. |
</p> | </p> |
Revision as of 14:49, 16 September 2015
Here you will see what we were able to measure with the very first prototype of our self-built device. To see the results of our final device, please refer to the essential results page. A detailed explanation on how to build your own low-priced iRIf device can be found on the bottom of this page.
For testing our device we immobilized proteins derived from rabbits on an iRIf slide in distinct spots (figure 1 D). The proteins we used were polyclonal anti-HCV (Hepatitis C Virus) antibodies derived from rabbit, which we then aimed to detect with anti-rabbit antibodies. We used these interaction partners in this series of experiment to reproduce a successful measurement, which we previously performed in the professional measuring device. The binding layer on the iRIf slide consisted of an APTES/PDITC surface. The spots on the slide were produced by pipetting 3 µl [500 µg/ml] rabbit-anti-HCV protein and 3 µl [1 mg/ml] BSA in an alternating pattern onto the slide. After incubation the slide was blocked for 30 min in BSA solution.
The camera used for the measurement was a Canon 50D. The camera was set to automatically take pictures at an interval of 5 seconds. The exposure time was set in order for the pixels in the image to have approx. 80% of maximum light saturation before the solution was flushed onto the chip (figure 1 C & D). The antibody solution was pipetted into the flow-chamber without the use of any microfluidic device. Instead, a syringe was loaded with 500 µl [5 µg/ml] anti-rabbit antibody solution (diluted in PBS) and slowly released into the binding chamber of the device by gently dispensing it from the syringe. As can be seen in figure 1 C, the quotient picture clearly shows binding of anti-rabbit antibodies to the rabbit protein spots. The BSA control spots show none or negligible unspecific binding.
In this section we will show you how to build your own iRIf device from scratch, using affordable, low-tech material. The design is focused on creating a device that is both low-priced and portable, demonstrating the potential for the DiaCHIP to be used even in rural areas where high-tech laboratories are poorly accessible.
General Principle
As can be seen in figure 2, the basic setup is fairly simple. Light from an LED enters a lense to obtain a parallel light beam. To achieve this, the distance from the LED to the lense has to be exactly one focal length. The light hits the iRIf slide afterwards where it is reflected (in the same angle as it hits the slide) and enters a second lense, whose purpose is to project a sharp image of the slide onto the CCD chip of the camera.
Construction Guidance
A major problem that we confronted when building the device from scratch was to assure that all components are at the exact distance and angle to each other. This is crucial as a slight misplacement of a component may lead to lower signal strengh, blurred images or, in the worst case, no signal at all. This can be difficult since our device does not rely on straight angles. We overcame this problem by designing a case for the device that ensures the right placement of the components inside the device. This was achieved by calculating all the distances beforehand using physical laws of optics. We realized this by drawing an exact vector graphic blueprint for our device. We then constructed a digital 3D model of the casing based on the vector blueprint to avoid a costly and time-consuming trial and error process (figure 4).
We designed the casing so that all the necessary parts (lenses, LED) are held in the correct position safely during the measurement, but remain removable to grant easy transportation of the device (i.e. to the Giant Jamboree). Figure 5 illustrates the parts that hold the lenses and LED in place.
After assuring that the 3D model of our device was set-up correctly, we created a vector graphic file which layed out all the parts needed for the casing in a 2D plain. Using this vector graphic file, we ordered the parts at Formulor, a service which lasers out parts from acrylic glass using a vector graphic as a template. The vector graphic template is shown in figure 6, and may be downloaded and used by everyone to build their own device. To allow easy mounting of the casing we also provide an easy to understand manual. One advantage of using acrylic glass is that the parts can be glued together easily using a few drops of acetone, fusing the parts together. The vector graphic file used to laser our the casing parts also contains a template for the parts which are necessary to attach the glass and PDMS slide to the device. These parts have to be lasered out of 1 mm thick acrylic glass. Once they are lasered out, the microfluidic tubes can be glued to the parts (figure 7). Once this is completed, these parts can be attached to the device with the magnets (figure 8)
The most difficult part to build by oneself is the PDMS flow-chamber. For producing such flowchambers, a wafer has to be made in a cleanroom. The template used for our PDMS flow-cell is shown in figure 9. If your facility has an engineering department, there is a high chance that a cleanroom is present. Ask the personel in charge if they can help you out with producing your flow-cell. If you already use another type of microfluidic flow chambers, our device should still be compatible with it, though some adaptions might be necessary. If you have no possibility of creating a flow chamber, you might want to consider building a very simplified DIY flow-chambers from two glass slides, separated by thin duct tape. Note that our device was not primarily build to support such a chamber though and would need appropriate modifications.
Download section
Legal notice
The iRIf detection method is patented. Biametrics and associated persons own patents concerning the detection principle. These patents are:
- Method for examining physical, chemical and biochemical interactions (DE102004051098.9, DE102005015030.6, EP05797776.1)
- Study of molecular interactions on and / or in thin layers (DE102007038797.2)
- Method and apparatus for determining reflection coefficients to filter arrangement with thin layers (DE102009019711.7)
- Again Detectable support for optical measuring methods (DE102009019476.2)