Team:UCLA/Notebook/Materials/Lyophilizer
Using the Seidlits lab's lyophilizer
- Using the lyophilizer
- Press "auto" to start the vacuum and refrigeration
- wait for the pressure and temperature to drop all the way down.
- place frozen sample in a chamber, and place the lid on. Make sure that the lid is fully secure.
- If there are already samples lyophilizing, be sure to close their valves before adding your chamber.
- valves are open when the indentation is facing the tube leading to the chamber
- push your chamber into a stem, then open the valve
- then open the valves of the other chambers
- If the alarm light is flashing, alert Alireza
- To remove your sample, you only have to close the valve for your other chamber. You don't need to close the other chamber valves.
- If you are the last one to use the lyophilizer, press "auto" again to turn off the machine
- NOTE: Never turn off the side switch!
- Then open the central chamber and take it off
- use a large kimwipe to wipe off the water that accumulated inside the machine