Difference between revisions of "Team:Paris Bettencourt/Protocols/titration-acid-phytic"

Line 2: Line 2:
 
{{Paris_Bettencourt/menu}}
 
{{Paris_Bettencourt/menu}}
 
{{Paris_Bettencourt/notebookBanner}}
 
{{Paris_Bettencourt/notebookBanner}}
 +
 +
<html>
  
 
<table>
 
<table>
Line 62: Line 64:
 
   </tr>
 
   </tr>
 
</table>
 
</table>
 +
 +
</html>
 
{{Paris_Bettencourt/footer}}
 
{{Paris_Bettencourt/footer}}

Revision as of 16:24, 2 September 2015

Titration of phytic acid using Megazyme© Kit
  • Preparation of reagent solutions (not supllied) :
    • Trichloroacetic acid (50% w/v) : 100mL
      • Add 50g of thrichloroacetic to 60mL of distilled water and dissolve. Make to volume (100mL) with distilled water. (Stable for > 6 moths at 4°C)
    • Hydrochloric acid (0.66M) : 1L
      • Add 54.5mL of hydrochloric acid to 945.5mL of distilled wtaer an mix. (Store at room temperature)
    • Sodium hydroxide (0.75M) : 200mL
      • Add 6g of sodium hydroxide pellets to 180mL of distilled water and dissolve. Make to volume (200mL) with distilled water. (Store at room temperature)
    • Phytic acid :
      • Pure phytic acid control sample may be required.
  • Sample extraction :
    • Weigh 1g of sample material.
    • Add 20mL of hydrochloric acid (0.66M).
    • Cover with foil and incubate for a minimum of 3 hours at room temperature.
    • Transfer 1mL of extract to a 1.5mL microcentrifuge tube.
    • Centrifuge 10 minutes at 13,000rpm.
    • Transfer 0.5mL of the resulting extract supernatant to a fresh 1.5mL microfuge tube.
    • Add 0.5mL of sodium hydroxide solution (0.75M) to neutralise.
  • Enzymatic dephosphorylation reaction :
  • Colourimetric determination of phosphorous :
  • Preparation of phosphorous calibration curve :
  • Calculation :
    • Phosphorous calibration curve :
      • Determine the absorbance of each phosphorous standard. Substract the absorbance of STD0 from the absorbance of the others STD, therby obtaining ΔA(phosphorous). Calculate M as follows, for each standard : Use "Mean M" to calculate the phosphorous content of test samples.
    • Phosphorous / phytic acid content :
      • Determine the absorbance of the both "Free Phosphorous" and "Total Phosphorous". Substract the absorbance of the "Free Phosphorous" sample from the absorbance of the "Total Phosphorous" sample. Obtaining ΔA(phosphorous).
      Where :
      20 = original sample extract volume
      F = dilution factor
      10,000 = conversion from µg/g to g/100g
      1.0 = wigh of original sample material
      v = sample volume It follows for phosphorous :
      It follows for phytic acid :