RNA and Riboswitches

"In the beginning, RNA was a simple molecule, but over time it has gained many functions. From self-replication, to storing and utilising information, to regulating cellular pathways, it is an example to all molecules..."

The Basic Principles

The RNA molecule

RNA in Regulation

Riboswitches

Click the buttons above to see information on the corresponding topic.

The Basic Principles

The Basics of DNA:

DNA (Deoxyribonucleic acid) is a biological molecule made up of sub-units (termed nucleotides/bases) which has a double stranded helical structure (figure 1). There are four types of bases (Guanine (G), Cytosine (C), Adenosine (A), and Tyrosine (T)) which can be joined together in many different conformations to form different DNA molecules. Each type of base is able to pair with one other type; C pairs with G, and A pairs with T (figure 2). Bases which pair are described as being complementary.
DNA's primary job is to store biological information in the form of genes, which are encoded by the bases which make up the DNA molecule. For example, CGGGATGTATTAC could encode for a specific gene.

The Basics of RNA:

RNA (RiboNucleic Acid) is similar to DNA in that it is a polymer molecule and made up of nucleotides/bases, but it differs in a few crucial ways. The first is that usually RNA is made up of only a single strand, as opposed to DNA's double stranded structure. The second is that in RNA, the Tyrosine (T) base is not used, instead it is replaced with Uracil (U), so that A pairs with U (figure 3).

The Basics of Proteins:

Proteins have many functions and properties. Proteins are also polymer molecules made up of subunits, but unlike with DNA and RNA these subunits are not bases/nucleotides, they are amino acids. Amino acids are relatively simple molecules which all share a generic structure, but have different functional (R) groups (figure 4). The interactions of the functional groups, both with other functional groups of the same/different proteins, and with other molecules/etc. in its environment, gives the protein its overall function. These functions can range from catalytic speed up the rate of a reaction) to structural (shape/strength of a cell), to virulence (causing disease in a host).

The Central Dogma:

In molecular biology, the central dogma explains the flow of genetic information; DNA to RNA to proteins. Essentially, this means that information is stored in the form of DNA (as explained above), converted into RNA, and then used to synthesise proteins.

Transcription
The process of converting DNA to RNA is termed transcription (figure 5). Usually, a type of RNA called messenger RNA (mRNA) is synthesised during transcription using DNA as a template, meaning that the sequence of the RNA molecule is determined by the sequence of the DNA from which it is copied. There are many reasons why an intermediate is required instead of simply using DNA, including:

• Protection of DNA: damage to DNA can cause unfavourable mutations so it is safer to use a 'copy' rather than the original,
• Regulatory reasons: the presence or absence of RNA can correspond to the presence/absence of the protein which it encodes for, meaning that it can be used to control cellular pathways
• Inability of DNA to reach protein machinery: in eukaryotic cells (animals, plants, fungi, etc.), the DNA is separated from the rest of the cell by a nuclear envelope, DNA is unable to pass through this envelope but RNA is able to

Translation:
The second part of the central dogma is the synthesis of proteins using mRNA. mRNA is able to encode for amino acids through the use of 'triplets', also known as 'codons'. These are simply three bases on mRNA which corresponds to a single amino acid, of which there are 21 (natural) types (figure 6). For example, the codon AUG codes for the amino acid methionine (M).

While codons allow mRNA to encode the amino acid sequence of a protein, they do not explain how this information is used practically. In order to do this, we must look at another type of RNA; tRNA (transfer RNA). As can be seen in figure 7, tRNA has an interesting secondary structure, and two important regions. The first of these regions is the attachment site at the top of the tRNA, which is where a specific amino acid to the tRNA is able to attach. The second region is the anti-codon at the bottom of the molecule. The anti-codon is complementary to the codon for the amino acid which is attached to that tRNA, allowing the tRNA to bind to the mRNA, and hence ensure that the amino acid is added to the sequence in the correct place (figure 8).

There is still one more main part of the translation mechanism which is missing, and that is how the amide bonds between amino acids are formed in order to synthesis the protein. Once again, RNA comes to the rescue, this time in the form of rRNA (ribosomal RNA). The are different types of rRNA, and they come together (along with some proteins) to form a specific complex called a ribosome (figure 9, also pictured in our logo). The ribosome's job is to bind to the mRNA and 'read' along it, ensuring that the correct tRNAs are added at the right time (figure 10)

The RNA Molecule

As has been mentioned briefly, RNA is a single stranded, helically structured polymer molecule made up of nucleotides/bases. While it may seem that this structure is simpler than DNA, because it doesn't have all of its bases already paired to its complementary strand means that the RNA's nucleotides are free to base pair in many different ways. For example, the RNA molecule could base pair with itself (figure 1a) or other molecules to form a complex (figure 1b).

The ways in which the RNA bases interact defines the (secondary) structure of the molecule, so therefore the sequence of the RNA molecule defines the structure of the molecule. This means that if a specific RNA structure is required, then it should be able to be achieved by giving the RNA a specific sequence. This is shown in figure 2. The RNA molecule has two sections which are complementary to each other, which can therefore base pair to create a stem region. The bases which are not complementary remain un-paired and create a loop at the top of the stem section. The fact that RNA is able to fold into many types of secondary structures means that it can have a variety of functions, including those of tRNA and rRNA, which were discussed in the previous section.

RNA can also play an important role in regulating cell processes, this will be discussed in detail in the next section.

RNA in Regulation

There are a few ways in which RNA can be involved in regulation. The first of these is also the simplest; the amount of mRNA present. Simply, if there is more mRNA, then more protein will be made, and the pathway in which the protein is involved increases in activity. If there is less mRNA present, then the reverse occurs. While this idea may be simple conceptually, there are many ways in which the amount of mRNA can be controlled. The first is also a simple idea; produce less mRNA from the DNA in the first place. This can be achieved by 'down regulating' the expression of the gene which encodes for the mRNA through inactivation of transcription factors or activation of inhibitors.

Another way in which the amount of mRNA can be controlled is through the degradation of existing mRNA. This can be achieved through the use of a complex called RISC (RNA-induced silencing complex) and dsRNA (double stranded RNA) or shRNA (small hairpin RNA). The mechanism for this is shown in figure 2. Essentially, the dsRNA/shRNA is cleaved in several places to form small dsRNA fragments, now termed miRNA (micro RNA). The miRNA can then bind to the RISC and one strand is digested, causing it to become ssRNA (single stranded). The miRNA can now act as a guide strand and bind to an mRNA which has a complementary section. Once bound, the RISC can cleave the mRNA, inactivating it. This mechanism is found in eukaryotic cells (animals, plants, fungi, etc.).

Another way in which RNA can be involved in regulation is through the formation of riboswitches. These are discussed in detail in the next section.

Riboswitches

Riboswitches can be thought of as a part of an mRNA molecule which is capable of regulating itself. There are many different types, each with slightly different mechanisms, however all types of riboswitches share in common that they have an 'on' and 'off' state, and that this state can be determined by the binding of a (small) molecule, i.e a ligand. Below are some types of riboswitches and the mechanisms by which they 'turn on/off' mRNA.

Transcriptional control:

These types of riboswitches are able to control whether/how much of the mRNA is transcribed (made from the DNA). The way in which is these switches work is by the formation of either a terminator or anti-terminator secondary structure, depending on whether a ligand is bound or not. Figure 1 shows a general mechanism for this. Briefly, during transcription a ligand can bind and change the conformation of the RNA which has already been synthesised. This conformational change can cause the formation of either a terminator or anti-terminator. If a terminator is formed, then transcription is halted and the full mRNA is not produced, however if an anti-terminator is formed then transcription is able to progress and the full mRNA is able to be made.

Translational control - RBS sequestration:

Riboswitches which control translation allow the full mRNA to be produced no matter what, however the state of the switch decides whether the mRNA is translated into a protein. mRNA contains a ribosome binding site (RBS) to which a ribosome can bind. The ribosome then reads along the RNA until it reaches an AUG codon - a start codon, at which point the protein begins to be synthesised. The riboswitch is able to stop this from happening by taking on a conformation which can sequester the RBS away from the ribosome, and hence inhibit translation/protein synthesis (figure 2).

Translational control - self-cleavage:

These types of riboswitches are similar to the type described above in that they both exhibit control at the translational level, and they both inhibit translation by sequestering the RBS, however this type of riboswitch has a slightly different mechanism. The action of the ligand binding/un-binding changes the conformation of the switch such that a cleavage site is either exposed or hidden. When the cleavage site is exposed, the switch can be cut in that place and release the mRNA, along with its RBS, and allow it to be translated. While the switch is whole, however, the RBS remains hidden (figure 3).

Other types of Riboswitches:

There are many more types of riboswitches than those listed above, and each different riboswitch will have a slightly different mechanism, however from those described above the idea of a riboswitch should be clear.