Revision as of 14:17, 18 September 2015

The broad scope of DIY Biology

Following in the footsteps of iGEM Aachen 2014, we are building custom made /Team:Aachen/Lab/Bioreactor/Hardware hardware for custom made biology. Since there was no suitable design in any DIY platform (e.g. Hackteria.org, DIYBIO.ORG, Appropedia.org) we started to build our bioreactor system right from scratch. While demonstrating our first prototype at the [http://igem.rwth-aachen.de/2015/index.php/Team:Aachen/Practices/Maker_Faire MakerFaire] in Hannover, we were fascinated by the exhibited DIY Biology projects. Inspired by the creativity and commitment of the "Makers", we decided take a deeper look into the European [http://igem.rwth-aachen.de/2015/index.php/Team:Aachen/Practices/Community_Labs Community Lab] Scene.

Since not only iGEM teams but also Community Labs shared our problems with the organization of samples in the fridge, we developed [http://igem.rwth-aachen.de/2015/index.php?title=Team:Aachen/Practices/Tubefront tubefront], an organisation software for biological samples. Speaking of software, the use of software on computers, smartphones or tablets increases in laboratories all around the world. But is it safe to bring in these? In collaboration with iGEM Team Slovenia, we considered respective [http://igem.rwth-aachen.de/2015/index.php?title=Team:Aachen/Practices/Safety biosafety] aspects by analyzing how many microbes live on the surfaces of such devices.

During the course of our project, we had the pleasure to meet and collaborate with a great number of passionate and creative partners inside and outside of the iGEM community. At our "Collaborations" page, we tell you about our active [http://igem.rwth-aachen.de/2015/index.php?title=Team:Aachen/Collaborations collaborations] and more!

Click on the tiles below to visit our hardware section or to navigate through the different parts of our policy & practices work:

a

Collaborations

Safety

tubefront

Community Labs

Maker Faire

Hardware

a

Achievements

Gathering and implementing valuable feedback on our bioreactor system design at the MakerFaire and other occasions
Extensive discussion of and intensive collaboration with Community Labs
Developing a novel software to easily organize samples in the lab and sharing it with iGEM teams and Community Labs
Evaluating biosaftey and respective concerns about biohacking with Community Labs and iGEM teams

a

Every age has an opinion on DIY Biology

Initiation of our collaboration with the "Technik Garage" at the MakerFaire in Hannover

▲

@@ Line 3: / Line 3: @@
 = The broad scope of DIY Biology =
-Following in the footsteps of iGEM Aachen 2014, we are building custom made [http://igem.rwth-aachen.de/2015/index.php?title=Team:Aachen/Lab/Bioreactor/Hardware hardware] for custom made biology. Since there was no suitable design in any DIY platform (e.g. Hackteria.org, DIYBIO.ORG, Appropedia.org) we started to build our bioreactor system right from scratch.
+Following in the footsteps of iGEM Aachen 2014, we are building custom made [[/Team:Aachen/Lab/Bioreactor/Hardware hardware]] for custom made biology. Since there was no suitable design in any DIY platform (e.g. Hackteria.org, DIYBIO.ORG, Appropedia.org) we started to build our bioreactor system right from scratch.
 While demonstrating our first prototype at the [http://igem.rwth-aachen.de/2015/index.php/Team:Aachen/Practices/Maker_Faire MakerFaire] in Hannover, we were fascinated by the exhibited DIY Biology projects.
 Inspired by the creativity and commitment of the "Makers", we decided take a deeper look into the European [http://igem.rwth-aachen.de/2015/index.php/Team:Aachen/Practices/Community_Labs Community Lab] Scene.

Difference between revisions of "Team:Aachen/Practices"

Revision as of 14:17, 18 September 2015

The broad scope of DIY Biology

Achievements