Revision as of 01:07, 19 September 2015

Our goal was to finally create a detailed guide to construct a Do-It-Yourself Bioreactor. We have developed the basic devices and some structures but it can always be upgraded. We would like to give everyone the opportunity to try to customize it as per the needs of their experiments. Some of the prerequisites are a Lasercutter and a 3D printer. So get hold of them and start using these files.

Software Packages

The Source code of the whole Master Control Program software suite is available in the igemsoftware GitHub repository under the GNU GENERAL PUBLIC LICENSE Version 3.0.

Hardware Design Files

In the Software module exist some programs that help to debug, test and run the bioreactor. The Arduino Firmware is available in two versions: one to enable the slaves to talk to each other (scalable) and the other one to provide higher possible aeration rates, but without inter slave communication.

Arduino firmware:
1. Pump debug/test:Aachen_PumpProg.zip
2. Stirrer debug/test: Aachen_StirrerDebug.zip
3. Pump Calibrator:Aachen_PumpCalibrator.zip
4. OD debug/test: Aachen_OD_final.zip
5. Final Arduino-Bioreactor Firmware:
  1. with inter slave communication: Aachen_Slave_Com.zip
  2. without inter slave communication: Aachen_without_Com.zip

▲

@@ Line 1: / Line 1: @@
 {{Team:Aachen/Header}}
 __NOTOC__
-= 1st heading =
-Our goal was to finally create a manual for Do-It-Yourself Bioreactor. We have developed some devices and some structures but it can always be upgraded. Well atleast we give everyone the opportunity to try making it on your own. Prerequisite is a Lasercutter and a 3D printer. So get hold of one and use these files.
+Our goal was to finally create a detailed guide to construct a Do-It-Yourself Bioreactor. We have developed the basic devices and some structures but it can always be upgraded. We would like to give everyone the opportunity to try to customize it as per the needs of their experiments. Some of the prerequisites are a Lasercutter and a 3D printer. So get hold of them and start using these files.
 =Software Packages=
@@ Line 20: / Line 20: @@
-On the Software Side too we would like to helper recreate our project. These are some programs that helps debug, test and run the bioreactor. The Arduino Firmware is available in two versions: One to enable the slaves to talk to each other (scalable), the other one provides higher possible aeration rates, but no inter slave communication.
+In the Software module exist some programs that help to debug, test and run the bioreactor. The Arduino Firmware is available in two versions: one to enable the slaves to talk to each other (scalable) and the other one to provide higher possible aeration rates, but without inter slave communication.
 #Arduino firmware:
 ##Pump debug/test:[https://static.igem.org/mediawiki/2015/7/70/Aachen_PumpProg.zip Aachen_PumpProg.zip]

Difference between revisions of "Team:Aachen/Lab/Bioreactor/Download Library"

Revision as of 01:07, 19 September 2015

Software Packages

Hardware Design Files