Team:Aachen/Lab/Methanol/Monocistronic Diversity Library

The Challenge

The Team

The Strategy

Biological Approach

The Bioreactor

The People

Maker Faire

Community Labs

tubefront

The Solution

Engineering

Biology

The Future

Within our polycistronic expression construct the expression of the four genes mdh, hps, phi and xpk is controlled by the constitutive promoter BBa_J23119. To tune the expression levels of the genes for a more efficient expression system it is neccessary to control them seperately.

We decided to adjust the expression levels of the four genes by using well-characterized constitutive promoters with different strengths from the Anderson Promoter Library.

Since we do not know which promoter combination is best for the efficient expression of the methanol uptake pathway, we developed a straightforward cloning strategy to build a monocistronic diversity library using the RDP Assembly standard.

Monocistronic methanol conversion plasmid The general design of a monocistronic methanol uptake plasmid. Later on we will introduce the design of a monocistronic diversity library, that varies in the promoter sequences prior to hps, phi and xpk. (Mdh = methanol dehydrogenase, Hps = 3-hexulose-6-phosphate, Phi = 6-phospho-3-hexuloisomerase, Xpk = phosphoketolase)

Design

The design of our monocistronic diversity library is mainly based on the RDP Assembly method by Synbiota. To better understand our design, we recommend to first read our detailed description about how the RDP assembly method works.

Because we expected the promoter BBa_J23119 to be the strongest within the Anderson Promoter Library, we chose this one to always control the bottleneck enzyme Mdh in our circuit design. Diversity is introduced by varying the promoters for the three remaining genes hps, phi and xpk. We decided on a set of four promoters from the Anderson Library:

• BBa_J23100
• BBa_J23104
• BBa_J23110
• BBa_J23119

These promoters cover a range from medium to very high in strength.

To minimize the genetic instability of our circuit , we designed it to have four different terminator sequences downstream to every CDS.

With three sites to introduce diversity in our circuit and (only) four different promoters, our resulting diversity library contains 4³ = 64 variants. Obviously, it is nearly impossible for an iGEM team to clone every single variant seperately during one summer.

Our first step towards an efficient cloning strategy was to split up the circuit into RDP part fragments. To introduce diversity we first planed to add equimolar promoter RDP part mixes at the black labeled sites in the circuit.

Monocistronic diversity library RDP circuit The circuit is composed by RDP parts. The black labled sites demonstrate, where we planed to introduce diversity by adding equimolar promoter part mixes during the assembly. (#FO4B#: Kanamycin anchor, #XYD9#: BBa_J23119 RDP part, #PRDW#: BBa_K1585210 RDP part, #PLTB#: trp terminator RDP part, #VO4C#: BBa_K1585211 RDP part, #8AMS#: BBa_B1006 RDP part, #ZALV#: BBa_K1585212 RDP part, #HTSR#: BBa_B1002 RDP part, #ZR1Q#: BBa_K1585213.BBa_B0015 RDP part, #OZD1#: high copy cap)

But to reduce the assembly steps and increase the assembly efficiency we decided to respectively combine three RDP parts from the circuit to form three different precursor sets.

Precursor sets One precursor set always consists of: BBa_B0034 + CDS RDP part the appropriate terminator RDP part promoter RDP part Because we're using four different promoters, each of the three precursor sets will exist of four different precursor constructs, that only differ in their promoter part.

The picture below illustrates how we designed the assembly of our precursor sets.

Assembly Strategy of the precursor plasmids First, the RDP part carrying the RBS and CDS is assembled to the cap. After the terminator part has been added, the reaction mix is split up into four. Respectively one of the four different promoter parts is added to one of the four reaction mix fractions. After finishing the assembly with an appropriate cap, you will receive four different precursor plasmids from the four different reaction mixes. (BBa_J23100, BBa_J23104, BBa_J23110 and BBa_J23119 represent the four different Anderson promoters)

In total, this strategy results in 12 different precursor plasmids:

Precursor	description
BBa_K1585210.Trp*.BBa_J23100	mdh.AP00 precursor
BBa_K1585210.Trp*.BBa_J23104	mdh.AP04 precursor
BBa_K1585210.Trp*.BBa_J23110	mdh.AP10 precursor
BBa_K1585210.Trp*.BBa_J23119	mdh.AP19 precursor
BBa_K1585211.BBa_B1006.BBa_J23100	hps.AP00 precursor
BBa_K1585211.BBa_B1006.BBa_J23104	hps.AP04 precursor
BBa_K1585211.BBa_B1006.BBa_J23110	hps.AP10 precursor
BBa_K1585211.BBa_B1006.BBa_J23119	hps.AP19 precursor
BBa_K1585212.BBa_B1002.BBa_J23100	phi.AP00 precursor
BBa_K1585212.BBa_B1002.BBa_J23104	phi.AP04 precursor
BBa_K1585212.BBa_B1002.BBa_J23110	phi.AP10 precursor
BBa_K1585212.BBa_B1002.BBa_J23119	phi.AP19 precursor

The resulting precursor plasmids have to be purified and cut with BsaI and NotI to convert them into new RDP parts. To prevent complications, we chose chloramphenicol as resistance marker for the precursor plasmids. Since we planed to use kanamycin as resistance marker in the monocistronic diversity library, the cut backbone fragments of the precursor plasmids would not lead to viable clones.

In the end, this is how the design of the final assembly of the monocistronic diversity library looks like: We introduce diversity by adding the precursor RDP parts of one type in equimolar amounts to the reaction.

Final assembly design for the monocistronic diversity library bla mdh precursor mix: equimolar mix of the four different BBa_K1585210.Trp.BBa_J231XX precursor RDP parts hps precursor mix: equimolar mix of the four different BBa_K1585211.BBa_B1006.BBa_J231XX precursor RDP parts phi precursor mix: equimolar mix of the four different BBa_K1585212.BBa_B1002.BBa_J231XX precursor RDP parts (#FO4B#: kanamycin cap, #XYD9#: BBa_J23119 RDP part, #ZR1Q#: BBa_K1585213.BBa_B0015 RDP part, #OZD1#: high copy cap)

The resulting assembly product is supposed to be transformed into an appropriate expression strain (e.g. E. coli BL21 Gold DE3).

Results

The following table gives an overview on our achieved progress in creating precursor plasmids:

• Failure = no valid plasmid sequenced
• Success = a valid plasmid without mutations was sequenced

Precursor	Results	Plasmid ID
BBa_K1585210.Trp*.BBa_J23100	Failure	-
BBa_K1585210.Trp*.BBa_J23104	Success	#OX44#
BBa_K1585210.Trp*.BBa_J23110	Failure	-
BBa_K1585210.Trp*.BBa_J23119	Success	#DNRY#
BBa_K1585211.BBa_B1006.BBa_J23100	Success	#ERZK#
BBa_K1585211.BBa_B1006.BBa_J23104	Failure	-
BBa_K1585211.BBa_B1006.BBa_J23110	Failure	-
BBa_K1585211.BBa_B1006.BBa_J23119	Failure	-
BBa_K1585212.BBa_B1002.BBa_J23100	Success	#931O#
BBa_K1585212.BBa_B1002.BBa_J23104	Success	#EZYZ#
BBa_K1585212.BBa_B1002.BBa_J23110	Success	#XW1Y#
BBa_K1585212.BBa_B1002.BBa_J23119	Success	#RABS#

• *Trp = trp terminator, RDP part provided by Synbiota

Although we successfully created all required basic RDP parts, we were not able to create all the precursor RDP parts to continue with the assembly of the diversity library. In fact, we did not have problems to assemble the precursors. The major problem we had to face were mutations within the promoter sequences.

Synbiota recommends to use HPLC purified oligos for creating your own RDP part below 100 bp in length, but since we had to create lots of RDP parts and a limited budget, we decided to order mostly standard desalting oligos. This might be a reason, why many of our promoter sequences showed deletions and/or point mutations.

A more detailed documentation about creating the RDP parts and sequencing results can be found under:

Laboratory Notebook

Outlook

After characterizing the Mdh activity in our polycistronic strain and considering it's reduced growth rate, we think that the monocistronic expression strategy is worth exploring.

References

▲

Contact

CC-BY-SA iGEM Aachen 2015