Materials Required

DC - Geared Motor
Neodymium magnets
Transistor IRLIZ44N
custom made 3D Structure
diode

Geared DC Motor

DC - Geared Motor

The DC Geared Motor we use is a combination of 4:4:1 gears and a brushed DC motor. The motor is cylindrical, with a diameter just under 25 mm, D shaped output shaft which is 4 mm in diameter and extends 12.5 mm from the face plate of the gear box. This motor unit weighing 95 gms, has a speed of 1400 RPM d and 150 mAmps Current rating at 6V.

3D Structure with magnets

spacer

Magnets and 3D structure

Neodymium cubic supermagnets of size 5 mm are fitted into a 3D structure on the motor, to create a magnetic field for the fish inside the bioreactor. The 3D structure is a platform to be fitted on the DC motor, having cubical holes to fit the magnets in.

Geared DC Motor

Transistor IRLIZ44N

It is a single pulse avalanche rated MOSFET in an isolated package. It has a continuous Drain current of maximum 30 Amps and Drain to Source maximum withstandable voltage of 16 volts.

spacer

Circuit

The circuit uses a Transistor and a Diode to control the RPM value using a PWM pin from Arduino.

Circuit Diagram for Stirrer Control

Assembly Video

Files

The files for the 3D structure can be found here : File:Aachen Stirrer3D.zip

The files for the Debug program can eb found here : File:Aachen StirrerDebug.zip

References

▲

Team:Aachen/Notebook/Construction Manuals/Stirrer