Difference between revisions of "Team:Heidelberg/Overview"

Revision as of 03:56, 19 September 2015

Diving into the world of functional nucleic acids

In 1952 DNA was described as the carrier of genetic information for the first time. Hershey1952 Shortly after that Crick proposed the central dogma that DNA is transcribed into RNA and then translated into a protein.Crick1958 Since then the role of nucleic acids in modern biology has exploded. Apart from those essential roles, both DNA and RNA with versatile functions were described. For instance first catalytic RNA that was later called RNA-enzymes or ribozymes was discovered in the early 1980s.Cech1981Kruger1982

Catalytic RNA – Ribozymes

Figure 1. Hammerhead Ribozyme

The secondary structure of a Hammerhead Ribozyme (HHR). Arrow indicates position of cleavage between third and first stem. First and second stem are stem loops while stem three is open.

In 1982 the first catalytic RNA (Ribozyme): a self-spicing intron from Tetrahymena pre-rRNA was described.Cech1981Kruger1982 Shortly after the discovery of these self-spicing introns further ribozymes were identified in different organisms. Amongst which the hammerhead ribozyme (HHR) is a very prominent example (Fig.1) that has been employed by many laboratories since its discovery in 1986.Prody1986Forster1987 This ribozyme has the capability of self-cleavage. A HHR consists of three stems of which one is open. The complementary region of this open stem can be designed so that the HHR cleaves off a customized sequence without leaving a scarMeyer2014. (Click for design guide) This makes it a valuable tool in the work with functional RNA as it leaves defined 5’- or 3’-ends after cleavage that are essential for some applications.Balke2014

Another ribozyme that is related to the HHR is the hepatitis δ virus ribozyme (HDV).Sharmeen1988 In contrast to the HHR it cleaves itself off a RNA at a specific position without a recognition site and without leaving a scar. This advantage of being independent from an upstream sequence makes it widely applicable and thus is used in our new BBF RFC 110 that aims to simplify and standardize the use of functional RNA.

Figure 2. Hairpin Ribozyme

Naturally occurring Hairpin Ribozyme with cleavage site indicated by arrow.

Both of the mentioned types of ribozymes are found in satellite RNA of plant originSerganov2007 as does the so called hairpin ribozyme (Fig. 2). It is a ribozyme capable of cleaving and ligating a RNA complementary to itself.Buzayan1986 While researchers were looking for naturally occurring ribozymes, they developed methods to in vitro evolve the function of existing ribozymes and to discover new ones from random pools.Beaudry1992 This way scientists were able to establish catalytic systems with new function. For example Joyce developed a self-replicating system consisting of two hairpin-ribozyme-derived parts that replicate each other.Lam2009Lincoln2009

Our idea of working with functional nucleic acids originated from this system. We were fascinated by the vast variety of processes that they can perform and started digging deeper into the potential of nucleic acids as tools. During this process we came across interesting systems amongst which we found the twin ribozyme (Fig. 3). Another famous hairpin-ribozyme-derived functional nucleic acid developed by Müller.Schmidt2000 It is able to specifically cleave a RNA at two designed specific positions and afterwards re-ligate it. Balke Balke2014 applied the twin ribozyme as tool to edit mRNA in vitro.Balke2014 In our project we want to use this system to specifically repair the mutation in a mRNA leading to the malfunction of a protein. The function of the protein is restored by inserting the missing bases and thus the patients symptoms disappear.

Next to the directed evolution of existing ribozymes in vitro selection methodsBartel1993 were developed to select nucleic acids with new catalytic activities from a random pool. Catalytic RNA of versatile functions arose from these methods. For instance Seelig and Jäschke selected a diels alderase ribozyme catalyzing the Diels-Alder reaction leading to the formation of a carbon-carbon bond.Seelig1999 Not only can in vitro selection methods be applied to reveal new catalytic RNA but also to select aptamers.

Figure 3. Twin Ribozyme

Secondary structure of the Twin Ribozyme. With cleavage and ligation sites indicated by arrows. The Hairpin Ribozyme is derived from the Hairpin Ribozyme.

Aptamers

Figure 4. Theophylline Aptamer

Aptamers are RNA or DNA sequences that can selectively bind to a ligand or target. Scientists have selected a variety of aptamers for small molecules ranging from theophylline (Fig. 4A) being one of the first described aptamersJenison1994 over ATPSassanfar1993 to an aptamer for the protein thrombinBock1992.

Both catalytic nucleic acids and aptamers are as for today selected via systematic evolution of ligands by exponential enhancementJoyce1989Ellington1990Tuerk1990Bartel1993 also known as SELEX (Fig. 5). It is a very time consuming and expensive process. Many cycles of selection from a random pool of sequences have to be performed in order select the best candidates in each round. A variable starting pool of random sequences has to be prepared and after every cycle the candidates have to be mutated to further improve the binding to the target. All in all the process is rather inefficient. Probably this is the reason why there are still many small molecules and proteins for which no aptamer has been published yet.

It has been shown that selected aptamers can be used to make the catalytic activity dependent on the presence of a ligand.Soukup1999 Fusions like that are called aptazymes. For this a catalytic domain has to interact via a communication module with an aptamer (Fig. 6). In presence of the ligand the aptamer undergoes conformational changes which results in an activation or inactivation of the catalytic activity. In our project we use different aptamers and combine them with catalytic nucleic acids to use them in various applications. In order to develop the necessary tools we need a fast and efficient way to generate new aptamers and aptazymes. To meet these needs we have developed two parts of software: One that generates aptamers from scratch (MAWS) and another one that joins them with an existing catalytic nucleic acid (JAWS) in an optimized way. This method not only is faster but also cheaper than existing methods.

Figure 6. Aptazyme

An aptamer connected via a communication module to an catalytic sequence; The communication module translates the interaction of the ligand with the aptamer to the catalytic part of the aptazyme.

Figure 5. SELEX

Systematic Evolution of Ligands by EXponential Enrichment (SELEX): Current method to select functional nucleic acids from a random library. Figure adapted from: Source

Figure 7. Spinach Aptamer

The Spinach Aptamer turns on fluorescence of its ligand upon bind it.

Besides the above describes functional nucleic acids SELEX revealed aptamers which not only bind to a ligand but also are able to turn on fluorescence of different non-fluorescent dyes. An interesting example for an aptamer with such a special function is the Malachite Green Aptamer.Grate1999 In presence of malachite green the aptamer turns on the fluorescence of the dye.Babendure2003 In 2011 Jaffrey selected the famous Spinach RNA aptamer (Fig. 7). It binds a small molecule that resembles the fluorophore of the green fluorescent protein (GFP).Paige2011 Upon binding of the small molecule to the Spinach a green fluorescence comparable to that of the GFP is emitted. In our project we use variants of these fluorescent aptamers and engineer them to be dependent on small molecules of our interest.

Though we so far mainly discussed functional RNA there are also both DNA aptamers and catalytic DNA which were selected using SELEX as well. As for today the concept of functional nucleic acids in nature has only been found for RNA. Nevertheless DNA aptamers and also catalytic DNA were selected in vitro.

Catalytic DNA – DNAzymes

RNA-cleaving DNAzymes

Secondary structure of 7-18 and 10-23 RNA-cleaving DNAzyme with substrate RNA. Cleavage site is indiacted with an arrow.

SELEX revealed a variety of DNA aptamers and catalytic DNA known as DNAzymes (or Deoxribozymes). Breaker and Joyce selected the first DNAzyme, a RNA-cleaving DNA.Breaker1994 In 1997 Santoro and Joyce describe the 7-18 and 10-23 DNAzymeSantoro1997 (Fig. 8) which since then have been of special interested in DNAzyme research. Both recognize their substrate RNA by Watson-Crick base pairing and catalyze the attack of a 2’ hydroxyl group that leads to the formation of a 2’,3’-cyclic phosphate and leaves a 5’ hydroxyl RNA terminus.Santoro1998 Their activity has also been engineered to be dependent on the presence of a small molecule by the addition of an aptamer to its substrate recognition site.Wanga2002Wangb2002

To verify the prediction of the software MAWS we fused the calculated aptamers to a DNAzyme with JAWS and thus created a ligand dependent activity. For this we used the HRP-mimicking DNAzyme (Fig. 9) which was described in 1998.Travascio1998 It folds into a G-quadruplex that forms a complex with hemin and is then able to mimic the activity of a horse raddish peroxidase. Hence it is capable to produce reactive oxygen species (ROS) by the reduction of hydrogen peroxide to water. These ROS then leads to an activation of for example luminol which results in a chemiluminescent signal. In several of our subprojects we exploit this function as an easy readout such as for the AptaBody.