Difference between revisions of "Team:Cambridge-JIC/Collaborations"

Line 83: Line 83:
 
     <div class="slide" style="min-height:0px">
 
     <div class="slide" style="min-height:0px">
 
         <div style="width: 90%; margin: 30px 50px;color:#000">
 
         <div style="width: 90%; margin: 30px 50px;color:#000">
<p><center><img src="https://static.igem.org/mediawiki/2015/a/ae/2015-Glasgow-sticker.png"style="height: 75px">
+
<p><center><a href="//2015.igem.org/Team:Glasgow"><img src="https://static.igem.org/mediawiki/2015/a/ae/2015-Glasgow-sticker.png"style="height: 75px"></a>
 
<h2>Glasgow Team</h2></center>
 
<h2>Glasgow Team</h2></center>
 
<h4><center><i>We can see how you fluoresce</i></center></h4></p>
 
<h4><center><i>We can see how you fluoresce</i></center></h4></p>

Revision as of 10:10, 16 September 2015

Collaborations

William and Mary Team

As part of their project, the William and Mary (W&M) iGEM Team were imaging cells expressing a variety of fluorescent proteins, including RFP, CFP, GFP, and YFP. Their constructs are being used for the Interlab Measurement study. As part of the measurement track the W&M team assembled fluorescent constructs, and measured and reported their fluorescence. The samples were sent to us to confirm the correct assembly of the parts by validating their fluorescence. Their interest in seeing how their constructs performed (in terms of fluorescent output) perfectly matched our own need to test OpenScope on cell samples rather than fluorescent beads. In addition, optical components were obtained to extend our imaging capabilities to both GFP and RFP. In particular, RFP imaging has not been tested previously.

The W&M team were kind enough to send us dried DNA samples containing constructs for GFP and RFP expression in E. coli. Details on the protocols used to resuspend the DNA and to transform the cells can be found below.


Transformation Protocol


Context

  • Using E. Coli K12 Dh5 alpha cells

  • Dry plasmid for two different GFP constructs in duplicate (so 4 samples total) sent on filter paper

  • All constructs on Amp resistance backbones pSB1C3

  • Constructs are J23106 + I13504 on pSB1C3, and J23117 + I13504 on pSB1C3

  • Constructs generated through DNA synthesizing the insert (J231XX + I13504) and using Gibson Assembly to insert it into the Amp backbone


Objective:

  • Transform cells with the constructs provided

  • Image the cells for RFP and GFP fluorescence using OpenScope to confirm functionality of the inserts, and the microscope itself


DNA Extraction:

Adapted from: Extraction protocol

  1. Cut center of circles out of the filter paper

  2. Added 50 µl of EB buffer to resuspend DNA

  3. Pipetted up and down to mix


Transformation:

Adapted from: Transformation protocol

  1. Add 1 µl of DNA extract to thawed out competent Top10 E. coli cells (except control plate)

  2. Mixture allowed to stand on ice for 15 minutes

  3. Cells heat shocked for 30 seconds at 42˚

  4. Mixture allowed to stand on ice for 5 minutes

  5. 100 µl of LB added at room temperature

  6. Cells incubated for 1hr at 37˚ with shaking at 120 rpm

  7. Cells plated out on Amp plates containing rich medium


Imaging:

Fluorescent samples were then visualised with OpenScope using two set-ups:

  1. Standard set-up, using single LED illumination (470 nm, 100mW) and GFP epi-cube

  2. Non-standard set-up, using high brightness LED (470nm, 3W) and GFP epi-cube


Results:

Earlier testing using the standard set-up (single LED illumination, GFP epi-cube) indicated that visualising fluorescent beads was possible with OpenScope (Fig. 1).

Fig. 1: GFP-coated fluorescent beads visualised using OpenScope under standard set-up. Images were captured on 14.09.15 using the Webshell, and are unedited.


Testing using the commercial fluorescence microscope confirmed that the samples had phenotypes as reported by William and Mary. Both constructs resulted in GFP expression in E. coli. J23106+I13504 demonstrated increased fluorescence intensity relative to J23117+I13504.

A control slide (sample taken from the agar of the control plate, untransformed cells plated on Amp) was first tested to establish a fluorescence-free baseline (Fig. 2a). The duplicate J23106+I13504 samples were then tested using the standard set-up and non-standard set-up. Fluorescence was detected (Fig. 2b and 2c).

Fig. 2: a Control slide (left) showing no fluorescence b J23106+I13504 samples imaged using standard set-up showing fluorescence under 470nm excitation (centre) c J23106+I13504 samples imaged using non-standard set-up (right). All images were captured using the Webshell on 15.09.15 and are unedited.


Duplicate J23117+I13504 samples were then tested using standard set-up and the non-standard set-up, but the brightness was insufficient to image the fluorescence. This confirms the reduced fluorescence intensity of the J23117+I13504 samples compared to the J23106+I13504 samples.


Glasgow Team

We can see how you fluoresce

Collaboration with the Glasgow iGEM Team was also based on fluorescence imaging: as part of their project, the Glasgow team are characterising different fluorescence constructs expressing RFP and GFP. It was therefore beneficial for them to have an independent group analyse the bacterial expression of their constructs, and for us to have some living fluorescent samples to image. Specifically, the bacterial transformants they supplied were reported to have the following phenotypes:

  • DH5α - No antibiotic resistance, no fluorescence (control)

  • DH5α - Kanamycin resistance, GFP and RFP fluorescence (in the same cell)

  • DH5α - Kanamycin and Chloramphenicol resistance, RFP fluorescence

  • DH5α - Kanamycin and Chloramphenicol resistance, GFP fluorescence

  • DH5α - Kanamycin and Chloramphenicol resistance, mostly GFP fluorescence with a small proportion of cells on the plate expressing RFP

Our objective was therefore twofold: firstly to test the capabilities of OpenScope in analysing bacterial samples for GFP and RFP fluorescence, and secondly to report back to Glasgow with our phenotypic analysis of their bacterial strains.


Results:

After preliminary testing using the RFP epi-cube, it was decided that imaging of RFP at this stage would not be possible. Hence only bacterial strains expressing GFP (as confirmed earlier) were tested against the control.

Testing using the commercial fluorescence microscope confirmed that the samples had phenotypes as reported by Glasgow. From tube 5, a small proportion of the cells were expressing RFP and the majority expressed GFP as predicted.

Results from preliminary testing of DH5α cells with p126.1 and p56.1 (confirmed: GFP expression only) using the standard set-up indicated illumination brightness was insufficient to detect GFP. The non-standard set-up (with a brighter LED) was used, and GFP expression was confirmed in p126.1, p126.+p56.1 and p126.1+p80.1 cells as expected (Fig. 3a-d). The images display an artefact of the square shape of the LED used, as there is an area of increased fluorescence in the outline of a square at the centre of the images (Fig 3c and d).

Fig. 3: a Control slide (left) showing no fluorescence b p126.1 samples imaged using non-standard set-up under 470nm excitation (centre left) c p126.1+p80.1 samples imaged using non-standard set-up showing fluorescence (centre right) d p126.1+p56.1 samples imaged using non-standard set-up (right). All images were captured using the Webshell on 15.09.15 and are unedited.


Conclusions:

The first objective of the collaboration was to confirm the phenotypes of the bacterial strains and the expression of fluorescent proteins. Due to the technical limitations of OpenScope (see below), RFP could not be visualised. Hence a commercially available microscope was used to confirm RFP expression. In addition, GFP was reliably confirmed using the same microscope. Across the board, expression of the fluorescent proteins was as reported by Glasgow and W&M iGEM teams. This confirms the functionality of the plasmids.

After successful visualisation of fluorescent beads labeled with GFP (Fig. 1), it was expected that OpenScope would enable visualisation of E. coli expressing GFP. However, results indicate that reliable detection was not possible using the standard set-up (single LED illumination, GFP epi-cube). Possible reasons are:

  1. The fluorescent beads used are far brighter than biological samples, and therefore can be visualised with low-brightness LEDs

  2. Bacterial cells are widely dispersed on a microscope slide when prepared from a liquid culture. Fluorescence can only be detected in clustered bacterial cells and colonies, therefore OpenScope cannot resolve individual fluorescent bacterial cells

Replacement of the 100mW LED with the 3W LED allowed visualisation of samples with reduced fluorescence intensity in the case of the p126.1, p126.+p56.1 and p126.1+p80.1 cells. The 100mW LED was sufficient only to image the J23106+I13504 samples. Overall, the results suggest that in order to reliably detect fluorescence the 3W high-power surface-mount LED is more appropriate. However, this is still not sufficiently reliable to make OpenScope useful for fluorescence screening at this stage. In addition, the artefact (image of the LED itself) seen when using the 3W LED means that the uniformity of illumination must be improved.

RFP is more challenging to image, as it has a narrow gap between the excitation (584nm) and emission (607nm). For more information, see the Modeling Page.

UK Teams Meetup (Organised by Westminster Team)

Bringing microscopy to iGEMmers

In order for UK iGEM teams to meet, socialise and discuss their projects ahead of the Jamboree, the Westminster iGEM team organised a two day meeting in London. As the Hardware track was new to this year’s competition, and being the only team following this track in the UK, we felt this would be a fantastic opportunity to introduce other teams to the track and highlight the important role of hardware in synthetic biology.
Our workshop took the form of three stations, each covering a slightly different aspect of our project and each with a different discussion focus:

Optics Bench

A working set-up of our first optics bench, and demonstration 3D printed material. Discussion points:

  • 3D printing and rapid prototyping

  • Principles of open-source hardware

  • Inverting the Raspberry Pi camera lens

  • Field of view and resolution calculation

Microscopy Awaits

A working set-up of our latest microscope prototype, brightfield and fluorescence modes, fully motorised and video streaming to the Webshell. Discussion points:

  • Importance of, and our difficulty with, illumination

  • Remote control over Webshell

  • Epi-cube explanation

  • Stage flex-principle demonstration

Build Your Own

An interactive demonstration on building our microscope from scratch. Discussion points:

  • Importance of documentation and instructions

  • Design choices

  • Discuss improvements required

  • How to use Arduino and Raspberry Pi



The entire team was involved, and this allowed members of other teams to chat and ask questions at all three stations while the equipment was being run. The level of enthusiasm from other team members was extremely encouraging, and we were very surprised by the number of questions about the hardware track in general. We hope that as a result of our worksop, some teams may consider it for next year’s competition.
Perhaps one of the most important outcomes of the workshop was in raising awareness of the role of open source hardware (OSH). We emphasised the degree of collaboration and community that it fosters, in the context of our own project. Underlying this is the ability of other iGEM teams to build, modify and improve our microscope in the spirit of OSH and the competition. We invited and encouraged other team members to look at our designs, tinker with them and think about how they might alter them to fit their specific needs.

With thanks to the Westminster iGEM team for taking, and giving us access to, their fantastic photographs. All images courtesy of Westminster iGEM.